Серия LED-драйверов SL100_1

Snappy

Общие характеристики

 Раздел LED-драйверы
Тип преобразователя
Мощность выходная
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Функция защиты
Температура рабочая
Размер 320.6×30×18.2 мм
Применение
Особенности

Документация на серию SL100_1

 Snappy Optoelectronics Co., Ltd. IP20 LED Power Supply Features .European AC input (198‐264VAC) . Built‐in active PFC function . IP20 . Suitable for dry environment . Protections: Short circuit / Over voltage / Over temperature . Adopt plastic case and internal glue potting . Built‐in lightning protection device, it can satisfy DM 1kV . Comply with the world lighting equipment safety standards. . 3 years warranty Description: SL100 series is an indoor constant voltage LED power supply, rated input voltage AC 198‐264Vac ,with a maximum conversion efficiency of 94% and fan free design, works temperature range of ‐20 ° C to +45 ° C under free air convection, and has ultra‐high power factor, ultra‐low THD, low standby power consumption, all‐round protection function, not only greatly improves the reliability of products, but also ensures the life cycle of products. This series for LED Lighting design, applied to indoor lighting design. Suitable for almost any indoor location where LED Lighting can be installed in a variety of applications. Comply with the world lighting equipment safety specifications, also ensure the safety of users and lighting system during installation. Model: Output Voltage Model Output Current Output Current Precision Max. Output Power Power Factor (Typ.) Efficiency Model (Typ.) SL100‐12VF‐1 12V 0‐8.33A 100W ±5% 4% 0.95 94% SL100‐24VF‐1 24V 0‐4.17A 100W ±5% 4% 0.95 93% Remark: All the parameters are measured at 230VAC input, full load and 25 ℃ of ambient temperature if they are not specially mentioned. Input: Parameter Min. Value Typical Max. Value Note Value Rated input voltage 220 Vac 240Vac Input voltage 198 Vac 264Vac Input frequency 47Hz 63Hz Max. Input current 0.7A 230Vac,Full Load Input inrush current 60A 30Vac/50Hz,cold start Power factor  Derating curve is shown in figure. 0.96 230Vac,Full Load 0.97 www.snappy.cn 1 PDF
Документация на серию SL100_1 

Microsoft Word - SL100-12 24VF -1 Specafication

Дата модификации: 14.04.2022

Размер: 375.7 Кб

6 стр.

    Товары серии SL100_1

    Наименование i Упаковка Напряжение выходное Ток выходной
    SL100-12VF-1 (SNAPPY)
     
    SL100-24VF-1 (SNAPPY)
     
    		в коробках 50 шт