Серия микроконтроллеров широкого назначения STM32F100C8

Общие характеристики

Раздел Микроконтроллеры широкого назначения
Корпус LQFP-48
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём оперативной памяти
Количество входов/выходов
Интерфейсы I²C, IrDA, LIN, SPI, UART/USART
Периферия DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT
АЦП/ЦАП
Напряжение питания

Документация на серию STM32F100C8

STM32F100x4 STM32F100x6 STM32F100x8 STM32F100xB Low & medium-density value line, advanced ARM®-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces Datasheet - production data Features • Core: ARM® 32-bit Cortex®-M3 CPU – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance – Single-cycle multiplication and hardware division • Memories – 16 to 128 Kbytes of Flash memory – 4 to 8 Kbytes of SRAM • Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable voltage detector (PVD) – 4-to-24 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration • Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers • Debug mode – Serial wire debug (SWD) and JTAG interfaces • DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs • 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor )%*$ LQFP100 14 × 14 mm LQFP64 10 × 10 mm LQFP48 7 × 7 mm TFBGA64 5 × 5 mm • Up to 12 timers – Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter – 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop – One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop – Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop – 2 watchdog timers (Independent and Window) – SysTick timer: 24-bit downcounter – Two 16-bit basic timers to drive the DAC • Up to 8 communications interfaces – Up to two I2C interfaces (SMBus/PMBus) – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to 2 SPIs (12 Mbit/s) – Consumer electronics control (CEC) interface • CRC calculation unit, 96-bit unique ID • ECOPACK® packages Table 1. Device summary Reference Part number • 2 × 12-bit D/A converters STM32F100x4 STM32F100C4, STM32F100R4 • Up to 80 fast I/O ports – 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant STM32F100x6 STM32F100C6, STM32F100R6 STM32F100x8 STM32F100C8, STM32F100R8, STM32F100V8 STM32F100xB STM32F100CB, STM32F100RB, STM32F100VB November 2016 This is information on a product in full production. DocID16455 Rev 9 1/96 www.st.com PDF
Документация на STM32F100R8T6B 

Low & medium-density value line, advanced ARM®-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces

Дата модификации: 24.11.2016

Размер: 1.74 Мб

96 стр.

STM32F100x4 STM32F100x6 STM32F100x8 STM32F100xB Low & medium-density value line, advanced ARM-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces Datasheet  production data Features ■ Core: ARM 32-bit Cortex™-M3 CPU – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance – Single-cycle multiplication and hardware division ■ Memories – 16 to 128 Kbytes of Flash memory – 4 to 8 Kbytes of SRAM ■ Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable voltage detector (PVD) – 4-to-24 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration ■ Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers ■ Debug mode – Serial wire debug (SWD) and JTAG interfaces ■ DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs ■ 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor ■ 2 × 12-bit D/A converters ■ Up to 80 fast I/O ports – 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant June 2012 This is information on a product in full production. FBGA LQFP100 14 × 14 mm LQFP64 10 × 10 mm LQFP48 7 × 7 mm TFBGA64 (5 × 5 mm) ■ Up to 12 timers – Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter – 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop – One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop – Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop – 2 watchdog timers (Independent and Window) – SysTick timer: 24-bit downcounter – Two 16-bit basic timers to drive the DAC ■ Up to 8 communications interfaces – Up to two I2C interfaces (SMBus/PMBus) – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to 2 SPIs (12 Mbit/s) – Consumer electronics control (CEC) interface ■ CRC calculation unit, 96-bit unique ID ■ ECOPACK® packages Table 1. Device summary Reference Part number STM32F100x4 STM32F100C4, STM32F100R4 STM32F100x6 STM32F100C6, STM32F100R6 STM32F100x8 STM32F100C8, STM32F100R8, STM32F100V8 STM32F100xB STM32F100CB, STM32F100RB, STM32F100VB Doc ID 16455 Rev 7 1/88 www.st.com 1 PDF
Документация на серию STM32F100C8 

Low & medium-density value line, advanced ARM-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces

Дата модификации: 08.06.2012

Размер: 1.14 Мб

88 стр.

    Товары серии STM32F100C8

    Наименование i Упаковка T раб
    STM32F100C8T6B (ST) IC MCU 32BIT 64KB FLASH 48LQFP на поддоне 250 шт
    STM32F100C8T6BTR (ST) IC MCU 32BIT 64KB FLASH 48LQFP 2400 шт
    STM32F100C8T7B (ST)
     
    250 шт
    STM32F100C8T7BTR (ST)
     
    2400 шт