Серия микроконтроллеров широкого назначения STM32G051

STMicroelectronics

Общие характеристики

 Раздел Микроконтроллеры широкого назначения

Документация на серию STM32G051

STM32G051x6/x8 Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V Datasheet - production data Features • Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C/105°C/125°C operating temperature • Memories – Up to 64 Kbytes of Flash memory with protection and securable area – 18 Kbytes of SRAM (16 Kbytes with HW parity check) • CRC calculation unit • Reset and power management – Voltage range: 1.7 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Programmable Brownout reset (BOR) – Programmable voltage detector (PVD) – Low-power modes: Sleep, Stop, Standby, Shutdown – VBAT supply for RTC and backup registers • Clock management – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator with calibration – Internal 16 MHz RC with PLL option – Internal 32 kHz RC oscillator (±5 %) • Up to 44 fast I/Os – All mappable on external interrupt vectors – Multiple 5 V-tolerant I/Os • 7-channel DMA controller with flexible mapping • 12-bit, 0.4 µs ADC (up to 16 ext. channels) – Up to 16-bit with hardware oversampling – Conversion range: 0 to 3.6V • Two 12-bit DACs, low-power sample-and-hold • Two fast low-power analog comparators, with programmable input and output, rail-to-rail • 14 timers(two 128 MHz capable): 16-bit for advanced motor control, one 32-bit and five 16bit general-purpose, two basic 16-bit, two lowpower 16-bit, two watchdogs, SysTick timer • Calendar RTC with alarm and periodic wakeup from Stop/Standby/Shutdown November 2021 This is information on a product in full production. TSSOP20 6.4 × 4.4 mm LQFP32 7 × 7 mm LQFP48 7 × 7 mm UFQFPN28 4 × 4 mm UFQFPN32 5 × 5 mm UFQFPN48 7 × 7 mm WLCSP20 1.94 × 2.40 mm • Communication interfaces – Two I2C-bus interfaces supporting Fastmode Plus (1 Mbit/s) with extra current sink, one supporting SMBus/PMBus and wakeup from Stop mode – Two USARTs with master/slave synchronous SPI; one supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature – One low-power UART – Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed with I2S interface • Development support: serial wire debug (SWD) • 96-bit unique ID • All packages ECOPACK 2 compliant Table 1. Device summary Reference Part number STM32G051x6 STM32G051C6, STM32G051F6, STM32G051G6, STM32G051K6 STM32G051x8 STM32G051C8, STM32G051F8, STM32G051G8, STM32G051K8 DS13303 Rev 3 1/126 www.st.com PDF
Документация на STM32G051G8U6 

Datasheet - STM32G051x6/x8 - Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V The STM32G051x6/x8 mainstream microcontrollers are based on high-performance Arm®Cortex®-M0+ 32-bit ...

Дата модификации: 26.11.2021

Размер: 2.06 Мб

126 стр.

    Товары серии STM32G051

    Наименование i Упаковка Корпус
    STM32G051C6T6 (ST)
     
     
    		 200 шт —
    STM32G051C6U6 (ST)
     
     
    		 200 шт DFN-48 UFQFPN48
    STM32G051C8T6 (ST)
     
     
    		 100 шт LQFP-48
    STM32G051C8U6 (ST)
     
     
    		 —
    STM32G051F6P6 (ST)
     
     
    		 —
    STM32G051F8P6 (ST)
     
     
    		 TSSOP-20
    STM32G051F8Y6TR (ST)
     
     
    		 —
    STM32G051G6U6 (ST)
     
     
    		 —
    STM32G051G8U6 (ST)
     
     
    		 200 шт UFQFPN28
    STM32G051K6T6 (ST)
     
     
    		 10 шт —
    STM32G051K6U6 (ST)
     
     
    		 —
    STM32G051K8T6 (ST)
     
     
    		 10 шт LQFP-32
    STM32G051K8U6 (ST)
     
     
    		 10 шт —