Серия приемо-передатчиков общего назначения STM32WB50

Общие характеристики

Раздел Приёмо-передатчик общего назначения
Конструктивное исполнение
Рабочая частота
Режим работы
Стандарт передачи данных BLE 5.0 ; 802.15.4 / ZigBee / Thread
Версия стандарта протокола
Поддерживаемые интерфейсы 2xI²C, 1xUSART, 1xLP-UART, 2xSPI, 1x USB 2.0 FS, ADC 12-bit
Скорость передачи данных (макс)
Напряжение питания
Ток потребления
Мощность передатчика
Наличие встроенной антенны или антенного разъёма
Чувствительность приёмника
Размер 7×7 мм
Рабочая температура

Документация на серию STM32WB50

STM32WB50CG STM32WB30CE Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.2 or 802.15.4 radio solution Datasheet - production data Features  Includes ST state-of-the-art patented technology  Radio – 2.4 GHz – RF transceiver supporting Bluetooth® 5.2 specification or IEEE 802.15.4-2011 PHY and MAC, supporting Thread and  Zigbee® 3.0 – RX sensitivity: -96 dBm (Bluetooth® Low Energy at 1 Mbps), -100 dBm (802.15.4) – Programmable output power up to +4 dBm with 1 dB steps – Integrated balun to reduce BOM – Support for 1 Mbps – Dedicated Arm® 32-bit Cortex® M0+ CPU for real-time Radio layer – Accurate RSSI to enable power control – Suitable for systems requiring compliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66 – Support for external PA – Available integrated passive device (IPD) companion chip for optimized matching solution (MLPF-WB-01E3)  Ultra-low-power platform – 2.0 to 3.6 V power supply – – 10 °C to +85 °C temperature range – 14 nA shutdown mode – 700 nA Standby mode + RTC + 32 KB RAM – 2.25 µA Stop mode + RTC + 128 KB RAM – Radio: Rx 7.9 mA / Tx at 0 dBm 8.8 mA April 2021 This is information on a product in full production. UFQFPN48 7 x 7 mm solder pad  Core: Arm® 32-bit Cortex®-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 64 MHz, MPU, 80 DMIPS and DSP instructions  Performance benchmark – 1.25 DMIPS/MHz (Drystone 2.1) – 219.48 CoreMark® (3.43 CoreMark/MHz at 64 MHz)  Energy benckmark – 303 ULPMark™ CP score  Supply and reset management – Ultra-safe, low-power BOR (brownout reset) with five selectable thresholds – Ultra-low-power POR/PDR – Programmable voltage detector (PVD) – VBAT mode with RTC and backup registers  Clock sources – 32 MHz crystal oscillator with integrated trimming capacitors (Radio and CPU clock) – 32 kHz crystal oscillator for RTC (LSE) – Internal low-power 32 kHz (±5%) RC (LSI1) – Internal low-power 32 kHz (stability ±500 ppm) RC (LSI2) – Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25% accuracy) – High speed internal 16 MHz factory trimmed RC (±1%) – 1x PLL for system clock and ADC DS13047 Rev 5 1/119 www.st.com PDF
Документация на семейство STM32WB30 

Datasheet - STM32WB50CG STM32WB30CE - Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.2 or 802.15.4 radio solution The STM32WB50CG and STM32WB30CE multiprotocol wirel...

Дата модификации: 13.04.2021

Размер: 1.93 Мб

119 стр.

STM32WB50CG Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 or 802.15.4 radio solution Datasheet - production data Features • Includes ST state-of-the-art patented technology • Radio – 2.4 GHz – RF transceiver supporting Bluetooth® 5 specification or IEEE 802.15.4-2011 PHY and MAC, supporting Thread and ZigBee® 3.0 – RX Sensitivity: -96 dBm (Bluetooth® Low Energy at 1 Mbps), -100 dBm (802.15.4) – Programmable output power up to +4 dBm with 1 dB steps – Integrated balun to reduce BOM – Support for 1 Mbps – Dedicated Arm® 32-bit Cortex® M0 + CPU for real-time Radio layer – Accurate RSSI to enable power control – Suitable for systems requiring compliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66 – Support for external PA – Available integrated passive device (IPD) companion chip for optimized matching solution MLPF-WB55-01E3 • Ultra-low-power platform – 2 V to 3.6 V power supply – – 10 °C to +85 °C temperature range – 14 nA shutdown mode – 700 nA Standby mode + RTC + 32 KB RAM – 2.25 µA Stop mode + RTC + 128 KB RAM – Radio: Rx 7.9 mA / Tx at 0 dBm 12 mA ® ® • Core: Arm 32-bit Cortex -M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 64 MHz, MPU, 80 DMIPS and DSP instructions July 2019 This is information on a product in full production. UFQFPN48 7 x 7 mm solder pad • Performance benchmark – 1.25 DMIPS/MHZ(Drystone 2.1) – 219.48 Coremark® (3.43 Coremark/MHz @64 MHz) • Energy benckmark – 303 ULPMark™ CP score • Supply and reset management – Ultra-safe, low-power BOR (brownout reset) with five selectable thresholds – Ultra-low-power POR/PDR – Programmable voltage detector (PVD) – VBAT mode with RTC and backup registers • Clock sources – 32 MHz crystal oscillator with integrated trimming capacitors (Radio and CPU clock) – 32 kHz crystal oscillator for RTC (LSE) – Internal low-power 32 kHz (±5%) RC (LSI1) – Internal low-power 32 kHz (stability ±500 ppm) RC (LSI2) – Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25% accuracy) – High speed internal 16 MHz factory trimmed RC (±1%) – 1x PLL for system clock and ADC • Memories – 1 MB Flash memory with sector protection (PCROP) against R/W operations, enabling authentic Bluetooth® Low Energy and 802.15.4 SW stack DS13047 Rev 1 1/120 www.st.com PDF
Документация на серию STM32WB50 

Datasheet - STM32WB50CG - Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5 or 802.15.4 radio solution The STM32WB50CG multiprotocol wireless and ultra-low-power device...

Дата модификации: 10.10.2019

Размер: 1.88 Мб

120 стр.

    Товары серии STM32WB50

    Наименование i Упаковка
    STM32WB50CGU5 (ST) 1 шт