Серия микроконтроллеров широкого назначения STM8L101G3

Общие характеристики

Раздел Микроконтроллеры широкого назначения
Корпус UFQFPN28
Ядро
Максимальная частота ядра
Объём памяти программ
Тип памяти программ
Объём EEPROM памяти
Объём оперативной памяти
Количество входов/выходов
Интерфейсы
Периферия
Напряжение питания
Рабочая температура

Документация на серию STM8L101G3

STM8L101x1 STM8L101x2 STM8L101x3 8-bit ultra-low power microcontroller with up to 8 Kbytes Flash, multifunction timers, comparators, USART, SPI, I2C Datasheet - production data Features • Main microcontroller features – Supply voltage range 1.65 V to 3.6 V – Low power consumption (Halt: 0.3 µA, Active-halt: 0.8 µA, Dynamic Run: 150 µA/MHz) – STM8 Core with up to 16 CISC MIPS throughput – Temp. range: -40 to 85 °C and 125 °C • Memories – Up to 8 Kbytes of Flash program including up to 2 Kbytes of data EEPROM – Error correction code (ECC) – Flexible write and read protection modes – In-application and in-circuit programming – Data EEPROM capability – 1.5 Kbytes of static RAM • Clock management – Internal 16 MHz RC with fast wakeup time (typ. 4 µs) – Internal low consumption 38 kHz RC driving both the IWDG and the AWU • Reset and supply management – Ultra-low power POR/PDR – Three low-power modes: Wait, Active-halt, Halt • Interrupt management – Nested interrupt controller with software priority control – Up to 29 external interrupt sources • I/Os – Up to 30 I/Os, all mappable on external interrupt vectors – I/Os with programmable input pull-ups, high sink/source capability and one LED driver infrared output May 2017 This is information on a product in full production. UFQFPN32 5 x 5 mm UFQFPN28 4 x 4 mm LQFP32 7x7 mm TSSOP20 6.5 x 6.4 mm UFQFPN20 3 x 3 mm • Peripherals – Two 16-bit general purpose timers (TIM2 and TIM3) with up and down counter and 2 channels (used as IC, OC, PWM) – One 8-bit timer (TIM4) with 7-bit prescaler – Infrared remote control (IR) – Independent watchdog – Auto-wakeup unit – Beeper timer with 1, 2 or 4 kHz frequencies – SPI synchronous serial interface – Fast I2C Multimaster/slave 400 kHz – USART with fractional baud rate generator – 2 comparators with 4 inputs each • Development support – Hardware single wire interface module (SWIM) for fast on-chip programming and non intrusive debugging – In-circuit emulation (ICE) • 96-bit unique ID Table 1. Device summary Reference Part numbers STM8L101x1 STM8L101F1 STM8L101x2 STM8L101F2, STM8L101G2 STM8L101x3 STM8L101F3, STM8L101G3, STM8L101K3 DocID15275 Rev 16 1/88 www.st.com PDF
Документация на STM8L101F2U6TR 

8-bit ultra-low power microcontroller with up to 8 Kbytes Flash, multifunction timers, comparators, USART, SPI, I2C

Дата модификации: 12.05.2017

Размер: 2.05 Мб

88 стр.

STM8L101xx 8-bit ultralow power microcontroller with up to 8 Kbytes Flash, multifunction timers, comparators, USART, SPI, I2C Datasheet - production data Features • Main microcontroller features – Supply voltage range 1.65 V to 3.6 V – Low power consumption (Halt: 0.3 µA, Active-halt: 0.8 µA, Dynamic Run: 150 µA/MHz) – STM8 Core with up to 16 CISC MIPS throughput – Temp. range: -40 to 85 °C and 125 °C • Memories – Up to 8 Kbytes of Flash program including up to 2 Kbytes of data EEPROM – Error correction code (ECC) – Flexible write and read protection modes – In-application and in-circuit programming – Data EEPROM capability – 1.5 Kbytes of static RAM • Clock management – Internal 16 MHz RC with fast wakeup time (typ. 4 µs) – Internal low consumption 38 kHz RC driving both the IWDG and the AWU • Reset and supply management – Ultralow power POR/PDR – Three low power modes: Wait, Active-halt, Halt • Interrupt management – Nested interrupt controller with software priority control – Up to 29 external interrupt sources • I/Os – Up to 30 I/Os, all mappable on external interrupt vectors – I/Os with prog. input pull-ups, high sink/source capability and one LED driver infrared output August 2013 This is information on a product in full production. UFQFPN32 UFQFPN28 LQFP32 UFQFPN20 TSSOP20 • Peripherals – Two 16-bit general purpose timers (TIM2 and TIM3) with up and down counter and 2 channels (used as IC, OC, PWM) – One 8-bit timer (TIM4) with 7-bit prescaler – Infrared remote control (IR) – Independent watchdog – Auto-wakeup unit – Beeper timer with 1, 2 or 4 kHz frequencies – SPI synchronous serial interface – Fast I2C Multimaster/slave 400 kHz – USART with fractional baud rate generator – 2 comparators with 4 inputs each • Development support – Hardware single wire interface module (SWIM) for fast on-chip programming and non intrusive debugging – In-circuit emulation (ICE) • 96-bit unique ID Table 1. Device summary Reference STM8L101xx DocID15275 Rev 12 Part numbers STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, STM8L101G3 STM8L101K3 1/83 www.st.com PDF
Документация на серию STM8L101G3 

8-bit ultralow power microcontroller with up to 8 Kbytes Flash, multifunction timers, comparators, USART, SPI, I2C

Дата модификации: 06.08.2013

Размер: 1.72 Мб

83 стр.

    Товары серии STM8L101G3

    Наименование i Упаковка
    STM8L101G3U6 (ST)
     
    490 шт
    STM8L101G3U6A (ST)
     
    490 шт

    STM8L101G3 публикации

    20 августа 2018
    статья

    8-битные микроконтроллеры STM8

    STMicroelectronics является одним из крупнейших производителей полупроводниковых компонентов. Особое место в номенклатуре компании занимают микроконтроллеры семейств STM32 и STM8. Обзору последних и посвящена данная статья. У отечественных... ...читать