Серия алюминиевых конденсаторов CKL

Общие характеристики

	Раздел	Алюминиевые конденсаторы
	Допуск по ёмкости
	Срок службы
	Высота корпуса
	Способ монтажа

Документация на серию CKL

Aluminum Electrolytic Capacitors CKL series ‧105℃ 5000 hours Long Life. ‧Applicable to SMT process. ‧RoHS Compliance. ‧105℃ 5000hour長壽命產品。 ‧適用於SMT製程。 SPECIFICATIONS Items 項目 Characteristics 特性 Capacitance Tolerance 靜電容量誤差 ± 20%(120Hz﹐20℃) -40 ~ +105℃ Rated Voltage Range 額定電壓範圍 6.3 ~ 50VDC Capacitance Range 靜電容量範圍 22 ~ 1000μF Leakage Current 洩漏電流 CKL Operating Temperature Range 適用溫度範圍 I≦ 0.01CV or 3 (µA)，which is greater. ( After 2 minutes application of DC rated voltage, at 20℃) Dissipation Factor 散逸因素( tan δ) Low Temperature Stability 低溫特性 Impedance Ratio(Max) 阻抗比率(最大值) Measurement Frequency: 120Hz. Temperature: 20℃ Rated Voltage(V) 6.3 10 16 25 35 50 tan δ(Max) 32 28 22 16 13 12 10 16 25 35 50 Measurement Frequency: 120Hz. Rated Voltage(V) 6.3 Z(-25℃) ∕ Z(20℃) 4 3 2 2 2 2 Z(-40℃) ∕ Z(20℃) 10 7 5 3 3 3 5000hours,with application of rated voltage at 105℃ Load Life 負荷壽命 Shelf Life 放置壽命 Capacitance Change Within ± 30% of Initial Value tan δ 300% or less of Initial Specified Value Leakage Current Initial Specified Value or less The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4. Capacitance Change Within ± 300% of Initial Value tan δ 300% or less of Initial Specified Value Leakage Current Initial Specified Value or less Capacitance Change tan δ Resistance to Soldering Heat 焊錫耐熱性 The capacitors shall be kept on the hot plate maintained at 250℃ for 30 seconds. After removing from the hot plate and restored at room temperature they meet the characteristics requirements listed at right. Standards 參照標準 JIS C 5101-4-1 (IEC 60384) Leakage Current Within ± 10% of Initial Value Initial Specified Value Initial Specified Value or less Frequency Coefficient of Permissible Ripple Current Frequency (Hz) 100 ≦ F ＜ 1K 1K ≦ F ＜ 10K 10K ≦ F ＜ 100K 100K ≦ F 4.7 ~ 33 1.00 1.20 1.30 1.45 >33 1.00 1.10 1.20 1.30 Capacitance (μF) The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use , the rms ripple current has to be reduced. 89

PDF

Документация на серию CKL

Дата модификации: 24.08.2022

Размер: 674 Кб

2 стр.

найти CKL.pdf

Товары серии CKL

Наименование	Температура рабочая	Диаметр	Ток пульсаций НЧ	Размер
CKL006M102G10PKKKV00R (SUSCON)				10×10×10 мм
CKL006M331F10PKKKV00R (SUSCON)				8×8×10 мм
CKL006M471G10PKKKV00R (SUSCON)				10×10×10 мм
CKL010M221F10PKKKV00R (SUSCON)				8×8×10 мм
CKL010M331G10PKKKV00R (SUSCON)				10×10×10 мм
CKL010M471G10PKKKV00R (SUSCON)				10×10×10 мм
CKL016M221G10PKKKV00R (SUSCON)				10×10×10 мм
CKL016M331G10PKKKV00R (SUSCON)				10×10×10 мм
CKL016M471F10PKKKV00R (SUSCON)	—	—	—	—
CKL016M471G10PKKKV00R (SUSCON)				10×10×10 мм
CKL025M101F10PKKKV00R (SUSCON)				8×8×10 мм
CKL025M221G10PKKKV00R (SUSCON)				10×10×10 мм
CKL025M331G10PKKKV00R (SUSCON)				10×10×10 мм
CKL035M101G10PKKKV00R (SUSCON)				10×10×10 мм
CKL035M221G10PKKKV00R (SUSCON)				10×10×10 мм
CKL035M470F10PKKKV00R (SUSCON)				8×8×10 мм
CKL050M101G10PKKKV00R (SUSCON)				10×10×10 мм
CKL050M330F10PKKKV00R (SUSCON)				8×8×10 мм
CKL050M470F10PKKKV00R (SUSCON)				8×8×10 мм