Серия соединителей плата - плата AMPMODU Small Centerline

Общие характеристики

Раздел Соединители плата - плата
Шаг между контактами
Рабочее напряжение контактов
Рабочий ток контактов
Тип монтажа
Расположение контактов разъема

Документация на серию AMPMODU Small Centerline

Документация на серию AMPMODU Small Centerline 

AMPMODU Small Centerline Interconnection Systems TE Connectivity’s (TE) AMPMODU Small Centerline Interconnection Systems are fine pitch 1.0 mm [0.0394”] connectors that offer 85% space savings on t...

Дата модификации: 26.07.2021

Размер: 914.5 Кб

3 стр.

DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE) makes no representation or warranty, express or implied, that the product will comply with these requirements. Further, TE may change these requirements based on the results of additional testing and evaluation. Contact TE Engineering for further details. AMPMODU* 1.0 and 0.8 mm Small Centerline Board to Board 1. SCOPE 1.1. Content TENTATIVE 25FEB2020 Rev TENTATIVE 5 25FEB2020 108-32154 This specification covers performance, tests and quality requirements for the AMPMODU* Small centerline interconnection system incorporating standard pressure receptacles housed in flame retardant housings. The mating male header assemblies utilize 0.3 mm square posts housed in flame retardant insulating housings – Breakaway and Shrouded type. Receptacles and Headers mate on 1.0mm and 0.8 mm centerlines and mount on printed circuit boards. Qualification When tests are performed on the subject product line, procedures specified in Figure 1 shall be used. All inspections shall be performed using the applicable inspection plan and product drawing. 1.3. Qualification Test Results Successful qualification testing on the subject product line has not been completed. The Qualification Test Report number will be issued upon successful qualification testing. 2. APPLICABLE DOCUMENTS AND FORMS The following documents and forms constitute a part of this specification to the extent specified herein. Unless otherwise indicated, the latest edition of the document applies. 2.1. REQUESTOR: Jim Scholz 1.2. TE Documents • 114-32329: Application Specification (AMPMODU* 1.0mm and 0.8 mm Small Centerline Printed Circuit Board Connectors) • 501-TBD: Qualification Test Report (AMPMODU* 1.0mm and 0.8mm Small Centerline Interconnection System) 2.2. Industry Documents • • • 2.3. EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications IEC 60512: Connectors for Electronic Equipment Tests and Measurements IEC 60068: Environmental Testing General Procedure Reference Document • • 109-197: Test Specification (TE Test Specification vs EIA and IEC Test Methods) 109-1: General Requirements for Testing 3. REQUIREMENTS 3.1. Design and Construction Product shall be of the design, construction, materials and physical dimensions specified on the applicable product drawing. Rev 3 © 2020 TE Connectivity family of companies All Rights Reserved | Indicates Change Page 1 of 9 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.te.com PRODUCT INFORMATION 1-800-522-6752 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. Fonn 404-34 23Nov94 PDF
Документация на серию AMPMODU Small Centerline 

Дата модификации: 26.02.2020

Размер: 343.6 Кб

9 стр.

114-32329 Application Specification 26SEP2019 Rev 1 AMPMODU 1 mm Board to Board Receptacle All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless otherwise specified, dimensions have a tolerance of ±0.05 [±.002] and angles have a tolerance of 1°. Figures and illustrations are for identification only and are not drawn to scale 1. SCOPE This specification covers the requirements for application of AMPMODU 1 mm Receptacles for printed circuit board (PCB) applications. These connectors feature dual beam receptacle contacts which accept max 3.0 mm mating post with in-row spacing of 1.00 mm [.039 in.] centers, row-to-row spacing of 1.00 mm [.039 in.] centers, along with option for pick and place cap. The connectors are available in following variants:         Contact Area Plating – Gold Flash, Gold 0.38µm, Gold 0.76µm Solder tail lengths for PCB Thickness of – 1.6mm or 2.4mm Solder Method – Through Hole (TH) and Surface Mount (SMT) Packaging – Tape and Reel; Tube Mounting – Vertical Single and Dual row Dual entry Circuit Positions – 2 to 50 position per row When corresponding with TE Connectivity Personnel, use the terminology provided in this specification to facilitate your enquiries for information. Basic terms and features of this product are provided in Figure 1. Figure 1 © 2019 TE Connectivity Ltd. family of companies. All Rights Reserved. | Indicates Change TOOLING ASSISTANCE CENTER 1-800-722-1111 PRODUCT INFORMATION 1-800-522-6752 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 1 of 10 PDF
Документация на серию AMPMODU Small Centerline 

Class 2 Application Specification, AMPMODU 2mm Header

Дата модификации: 04.10.2019

Размер: 463.5 Кб

10 стр.

    Товары серии AMPMODU Small Centerline

    Наименование i Упаковка Тип Контакты Коммерческое наименование
    1-2267440-0 (TE)
    1-2267440-1 (TE)
    1-2267440-2 (TE)
    1-2267440-3 (TE)
    1-2267440-4 (TE)
    1-2267440-5 (TE)
    1-2267440-6 (TE)
    1-2267440-7 (TE)
    1-2267440-8 (TE)
    1-2267440-9 (TE)
    1-2267465-0 (TE)
    1-2267465-1 (TE)
    1-2267465-2 (TE)
    1-2267465-3 (TE)
    1-2267465-4 (TE)
    1-2267465-5 (TE)
    1-2267465-6 (TE)
    1-2267465-7 (TE)
    1-2267465-8 (TE)
    1-2267465-9 (TE)
    1-2331928-0 (TE)
    1-2331928-1 (TE)
    1-2331928-2 (TE)
    1-2331928-3 (TE)
    1-2331928-4 (TE)
    1-2331928-5 (TE)
    1-2331928-6 (TE)
    1-2331928-7 (TE)
    1-2331928-8 (TE)
    1-2331928-9 (TE)
    1-2331929-0 (TE)
    1-2331929-1 (TE)
    1-2331929-2 (TE)
    1-2331929-3 (TE)
    1-2331929-4 (TE)
    1-2331929-5 (TE)
    1-2331929-6 (TE)
    1-2331929-7 (TE)
    1-2331929-8 (TE)
    1-2331929-9 (TE)
    2-2267440-0 (TE)
    2-2267440-1 (TE)
    2-2267440-2 (TE)
    2-2267440-3 (TE)
    2-2267440-4 (TE)
    2-2267440-5 (TE)
    2-2267440-6 (TE)
    2-2267440-7 (TE)
    2-2267440-8 (TE)
    2-2267440-9 (TE)
    2-2267465-0 (TE)
    2-2267465-1 (TE)
    2-2267465-2 (TE)
    2-2267465-3 (TE)
    2-2267465-4 (TE)
    2-2267465-5 (TE)
    2-2267465-6 (TE)
    2-2267465-7 (TE)
    2-2267465-8 (TE)
    2-2267465-9 (TE)
    2-2331928-0 (TE)
    2-2331928-1 (TE)
    2-2331928-2 (TE)
    2-2331928-3 (TE)
    2-2331928-4 (TE)
    2-2331928-5 (TE)
    2-2331928-6 (TE)
    2-2331928-7 (TE)
    2-2331928-8 (TE)
    2-2331928-9 (TE)
    2-2331929-0 (TE)
    2-2331929-1 (TE)
    2-2331929-2 (TE)
    2-2331929-3 (TE)
    2-2331929-4 (TE)
    2-2331929-5 (TE)
    2-2331929-6 (TE)
    2-2331929-7 (TE)
    2-2331929-8 (TE)
    2-2331929-9 (TE)
    2267440-1 (TE)
    2267440-5 (TE)
    2267440-6 (TE)
    2267440-7 (TE)
    2267440-8 (TE)
    2267440-9 (TE)
    2267465-1 (TE)
    2267465-5 (TE)
    2267465-6 (TE)
    2267465-7 (TE)
    2267465-8 (TE)
    2267465-9 (TE)
    2331928-1 (TE)
    2331928-5 (TE)
    2331928-6 (TE)
    2331928-7 (TE)
    2331928-8 (TE)
    2331928-9 (TE)
    2331929-1 (TE)
    2331929-5 (TE)

    AMPMODU Small Centerline публикации

    26 августа 2021

    AMPMODU Small Centerline с шагом 1 мм от TE Connectivity – миниатюрное решение для межплатных соединений

    Компания TE Connectivity объявляет об очередном расширении популярного семейства соединителей AMPMODU. Линейку семейства пополнили межплатные сигнальные соединительные системы AMPMODU Small Centerline с шагом 1 мм, предназначенных для... ...читать