Серия DC-DC модульных преобразователей TBA_2

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Возможности
Комплекс защит
КПД
Напряжение изоляции вход-выход
Рабочая температура

Документация на серию TBA_2

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TBA 2 Series, 2 Watt • • • Continuous short circuit protection • Input voltage ranges (±10%): 5, 12, 24 VDC • • • • High efficiency up to 84% I/O isolation: 1'060 VAC Operating temperature range -40 to +80 °C without derating SIP-7 package Unregulated outputs The TBA 2 is a 2 Watt DC/DC SIP converter series which is specifically designed to offer a low-cost solution with no concession on quality and lifetime. The new design improves on the industry standard features and offers an integrated continuous short circuit protection circuit, an operating temperature range from –40°C to 80°C without derating and I/O-isolation of 1’500 VDC. It offers a broad application range in any space and cost critical application. 3-year product waranty Models Order Code Input Voltage Range TBA 2-0511 TBA 2-0512 TBA 2-0513 TBA 2-0521 TBA 2-0522 TBA 2-0523 TBA 2-1211 TBA 2-1212 TBA 2-1213 TBA 2-1221 TBA 2-1222 TBA 2-1223 TBA 2-2411 TBA 2-2412 TBA 2-2413 TBA 2-2421 TBA 2-2422 TBA 2-2423 www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 400 mA 165 mA 130 mA 200 mA 80 mA 65 mA 400 mA 165 mA 130 mA 200 mA 80 mA 65 mA 400 mA 165 mA 130 mA 200 mA 80 mA 65 mA April 27, 2020 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 200 mA 80 mA 65 mA –5 VDC –12 VDC –15 VDC 200 mA 80 mA 65 mA –5 VDC –12 VDC –15 VDC 200 mA 80 mA 65 mA typ. 78 % 82 % 82 % 79 % 82 % 82 % 79 % 82 % 84 % 79 % 83 % 84 % 78 % 84 % 84 % 80 % 84 % 84 % Page 1 / 3 PDF
Документация на серию TBA_2 

TBA 2 Datasheet 2 Watt DC/DC converter, industrial, ±10% input, short circuit protection, unregulated, encapsulated, SIP-7

Дата модификации: 27.04.2020

Размер: 830 Кб

3 стр.

    Товары серии TBA_2

    Наименование i Упаковка Каналов U вх Выход U вх ном. U1 I1 U2 I2
    TBA 2-0511 (TRACO)
     
    		1 шт — —
    TBA 2-0511/10 pcs (TRACO)
     
    		— —
    TBA 2-0512 (TRACO)
     
    		1 шт — —
    TBA 2-0512/10 pcs (TRACO)
     
    		— —
    TBA 2-0513 (TRACO)
     
    		2 шт — —
    TBA 2-0521 (TRACO)
     
    		1 шт
    TBA 2-0521/10 pcs (TRACO)
     
    TBA 2-0522 (TRACO)
     
    		3 шт
    TBA 2-0522/10 pcs (TRACO)
     
    TBA 2-0523 (TRACO)
     
    		1 шт
    TBA 2-0523/10 pcs (TRACO)
     
    TBA 2-1211 (TRACO)
     
    		1 шт —
    TBA 2-1211/10 pcs (TRACO)
     
    		—
    TBA 2-1212 (TRACO)
     
    		— —
    TBA 2-1212/10 pcs (TRACO)
     
    		— —
    TBA 2-1213 (TRACO)
     
    		— —
    TBA 2-1213/10 pcs (TRACO)
     
    		— —
    TBA 2-1221 (TRACO)
     
    TBA 2-1221/10 pcs (TRACO)
     
    TBA 2-1222 (TRACO)
     
    TBA 2-1222/10 pcs (TRACO)
     
    TBA 2-1223 (TRACO)
     
    TBA 2-1223/10 pcs (TRACO)
     
    TBA 2-2411 (TRACO)
     
    		— —
    TBA 2-2411/10 pcs (TRACO)
     
    		— —
    TBA 2-2412 (TRACO)
     
    		1 шт — —
    TBA 2-2412/10 pcs (TRACO)
     
    		— —
    TBA 2-2413 (TRACO)
     
    		в линейках 10 шт — —
    TBA 2-2413/10 pcs (TRACO)
     
    		— —
    TBA 2-2421 (TRACO)
     
    TBA 2-2422 (TRACO)
     
    TBA 2-2422/10 pcs (TRACO)
     
    TBA 2-2423 (TRACO)
     
    		10 шт
    TBA 2-2423/10 pcs (TRACO)