Серия DC-DC модульных преобразователей TEC_2WI

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Возможности
Комплекс защит
КПД
Напряжение изоляции вход-выход
Рабочая температура

Документация на серию TEC_2WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter • • • • • • • • • TEC 2WI Series, 2 Watt Compact SIP-8 package I/O-isolation voltage 1‘600 VDC Ultra-wide 4:1 input voltage range Fully regulated outputs Operating temperature range –40°C to + 93°C Continuous short circuit protection Remote On/Off 3-year product warranty Designed to meet UL 62368-1 TEC 2WI is a new series with the design purpose to improve the prevalent 2 Watt SIP-8 DC/DC converters in terms of cost, efficiency and performance. The latest technology and components enable an increase in efficiency by more than 20%. With the reduction of thermal loss, the operating temperature range can be expanded from -40°C to +93°C. The converters are fully regulated over 0 - 100% load (no minimum load is required). The models are available with ultra-wide input ranges of 4.5-18, 9-36 and 18-75 VDC. The functional I/O-isolation system is designed to meet IEC/EN 62368-1 with a test voltage (60 s) of 1600 VDC. Models Order Code Input Voltage Range TEC 2-1210WI TEC 2-1211WI TEC 2-1219WI TEC 2-1212WI TEC 2-1213WI TEC 2-1215WI TEC 2-1221WI TEC 2-1222WI TEC 2-1223WI TEC 2-2410WI TEC 2-2411WI TEC 2-2419WI TEC 2-2412WI TEC 2-2413WI TEC 2-2415WI TEC 2-2421WI TEC 2-2422WI TEC 2-2423WI TEC 2-4810WI TEC 2-4811WI TEC 2-4819WI TEC 2-4812WI TEC 2-4813WI TEC 2-4815WI TEC 2-4821WI TEC 2-4822WI TEC 2-4823WI www.tracopower.com 4.5 - 18 VDC (12 VDC nom.) 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 500 mA 400 mA 222 mA 167 mA 134 mA 83 mA 200 mA 83 mA 67 mA 500 mA 400 mA 222 mA 167 mA 134 mA 83 mA 200 mA 83 mA 67 mA 500 mA 400 mA 222 mA 167 mA 134 mA 83 mA 200 mA 83 mA 67 mA April 27, 2020 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA typ. 75 % 80 % 81 % 81 % 82 % 82 % 80 % 82 % 81 % 76 % 80 % 80 % 82 % 82 % 82 % 79 % 82 % 80 % 74 % 79 % 81 % 82 % 81 % 81 % 79 % 81 % 81 % Page 1 / 4 PDF
Документация на серию TEC_2WI 

TEC 2WI Datasheet 2 Watt DC/DC converter, industrial, 4:1 input, cost efficient design, high operating temperature, regulated, encapsulated, SIP-8

Дата модификации: 27.04.2020

Размер: 861.9 Кб

4 стр.

    Товары серии TEC_2WI

    Наименование i Упаковка P вых Каналов U вх Выход U вх ном. U1 I1 U2 I2
    TEC 2-1210WI (TRACO)
     
    		— —
    TEC 2-1211WI (TRACO)
     
    		— —
    TEC 2-1211WI/10 pcs (TRACO)
     
    		— —
    TEC 2-1212WI (TRACO)
     
    		— —
    TEC 2-1212WI/10 pcs (TRACO)
     
    		— —
    TEC 2-1213WI (TRACO)
     
    		— —
    TEC 2-1215WI (TRACO)
     
    		— —
    TEC 2-1215WI/10 pcs (TRACO)
     
    		— —
    TEC 2-1219WI (TRACO)
     
    		1 шт — —
    TEC 2-1221WI (TRACO)
     
    		6 шт
    TEC 2-1221WI/10 pcs (TRACO)
     
    TEC 2-1222WI (TRACO)
     
    TEC 2-1223WI (TRACO)
     
    TEC 2-1223WI/10 pcs (TRACO)
     
    TEC 2-2410WI (TRACO)
     
    		в линейках 2 шт — —
    TEC 2-2410WI/10 pcs (TRACO)
     
    		— —
    TEC 2-2411WI (TRACO)
     
    		10 шт — —
    TEC 2-2411WI/10 pcs (TRACO)
     
    		— —
    TEC 2-2412WI (TRACO)
     
    		в линейках 10 шт — —
    TEC 2-2412WI/10 pcs (TRACO)
     
    		— —
    TEC 2-2413WI (TRACO)
     
    		4 шт — —
    TEC 2-2413WI/10 pcs (TRACO)
     
    		— —
    TEC 2-2415WI (TRACO)
     
    		3 шт — —
    TEC 2-2415WI/10 pcs (TRACO)
     
    		— —
    TEC 2-2419WI (TRACO)
     
    		— —
    TEC 2-2419WI/10 pcs (TRACO)
     
    		— —
    TEC 2-2421WI (TRACO)
     
    TEC 2-2421WI/10 pcs (TRACO)
     
    TEC 2-2422WI (TRACO)
     
    TEC 2-2423WI (TRACO)
     
    		в линейках 10 шт
    TEC 2-2423WI/10 pcs (TRACO)
     
    TEC 2-4810WI (TRACO)
     
    		в линейках 10 шт — —
    TEC 2-4810WI/10 pcs (TRACO)
     
    		— —
    TEC 2-4811WI (TRACO)
     
    		3 шт — —
    TEC 2-4811WI/10 pcs (TRACO)
     
    		— —
    TEC 2-4812WI (TRACO)
     
    		в линейках 10 шт — —
    TEC 2-4813WI (TRACO)
     
    		— —
    TEC 2-4815WI (TRACO)
     
    		10 шт — —
    TEC 2-4819WI (TRACO)
     
    		— —
    TEC 2-4821WI (TRACO)
     
    TEC 2-4822WI (TRACO)
     
    TEC 2-4822WI/10 pcs (TRACO)
     
    TEC 2-4823WI (TRACO)
     

    TEC_2WI публикации

    19 ноября 2021
    новость

    TEC 2(WI) и TEC 3(WI) – новое поколение стабилизированных DC/DC-преобразователей Traco в корпусе SIP-8

    Компания Traco обновила линейку стабилизированных DC/DC–преобразователей 2 и 3 Вт, выпустив новые семейства TEC_2, TEC_2WI, TEC_3 и TEC_3WI с шириной входа 2:1 и 4:1 (для моделей с окончанием ”WI”). Преобразователи нового... ...читать