Серия DC-DC модульных преобразователей TEL15

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Комплекс защит
	Напряжение изоляции вход-выход
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию TEL15

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEL 15 Series, 15 Watt CB Scheme Features ◆ High efficiency up to 86 % ◆ Operating temperature range UL 60950-1 –40°C to +71°C ◆ ◆ ◆ ◆ ◆ ◆ Indefinite short-circuit protection I/O isolation 1500 VDC Industry standard pinout Cost optimized design Lead free design, RoHS compliant 3-year product warranty The TEL 15 series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of –40°C to +71°C at full load. This product serie provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Ordercode Input voltage range TEL 15-1210 TEL 15-1211 Output voltage Output current max. Efficiency typ. 3.3 VDC 3‘000 mA 78 % 5.1 VDC 3‘000 mA 81 % TEL 15-1212 9 – 18 VDC 12 VDC 1’250 mA 86 % TEL 15-1213 (nominal 12 VDC) 15 VDC 1’000 mA 86 % TEL 15-1222 ±12 VDC ±625 mA 86 % TEL 15-1223 ±15 VDC ±500 mA 86 % TEL 15-2410 3.3 VDC 3‘000 mA 78 % TEL 15-2411 5.1 VDC 3‘000 mA 81 % TEL 15-2412 18 – 36 VDC 12 VDC 1’250 mA 86 % TEL 15-2413 (nominal 24 VDC) 15 VDC 1’000 mA 86 % TEL 15-2422 ±12 VDC ±625 mA 86 % TEL 15-2423 ±15 VDC ±500 mA 86 % TEL 15-4810 3.3 VDC 3‘000 mA 78 % TEL 15-4811 5.1 VDC 3‘000 mA 81 % 12 VDC 1’250 mA 86 % TEL 15-4812 36 – 75 VDC TEL 15-4813 (nominal 48 VDC) 15 VDC 1’000 mA 86 % TEL 15-4822 ±12 VDC ±625 mA 86 % TEL 15-4823 ±15 VDC ±500 mA 86 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TEL15

Дата модификации: 21.02.2014

Размер: 202 Кб

3 стр.

DC/DC Converters TEL 15 Series, 15 Watt RoHS compliant Features ◆ High Efﬁciency up to 86% ◆ Operating Temp. Range – 25°C to +71°C ◆ ◆ ◆ ◆ ◆ ◆ Indeﬁnite Short-Circuit Protection I/O-Isolation 1500 VDC Industry Standard Pinout Cost optimized Design Lead free Design, RoHS compliant 3 Year Product Warranty The TEL 15 series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efﬁciency allows an operating temperature range of -25°C to +71°C without derating. This product serie provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Ordercode Output voltage Output current max. Efﬁciency typ. TEL 15-1210 3.3 VDC 4’000 mA 78 % TEL 15-1211 5.1 VDC 3‘000 mA 81 % TEL 15-1212 12 VDC 1’250 mA 86 % 15 VDC 1’000 mA 86 % TEL 15-1222 ± 12 VDC ± 625 mA 86 % TEL 15-1223 ± 15 VDC ± 500 mA 86 % TEL 15-2410 3.3 VDC 4’000 mA 78 % TEL 15-2411 5.1 VDC 3‘000 mA 81 % 12 VDC 1’250 mA 86 % 15 VDC 1’000 mA 86 % TEL 15-2422 ± 12 VDC ± 625 mA 86 % TEL 15-2423 ± 15 VDC ± 500 mA 86 % TEL 15-4810 3.3 VDC 4’000 mA 78 % TEL 15-4811 5.1 VDC 3‘000 mA 81 % 12 VDC 1’250 mA 86 % TEL 15-1213 TEL 15-2412 TEL 15-2413 TEL 15-4812 TEL 15-4813 Input voltage range 9 – 18 VDC 18 – 36 VDC 36 – 75 VDC 15 VDC 1’000 mA 86 % TEL 15-4822 ± 12 VDC ± 625 mA 86 % TEL 15-4823 ± 15 VDC ± 500 mA 86 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TEL15

TEL15.indd

Дата модификации: 19.01.2006

Размер: 258.8 Кб

3 стр.

найти TEL15.pdf

Товары серии TEL15

Наименование	Упаковка	Возможности	Шум	КПД	Размер	U2	I2
TEL 15-1210 (TRACO)	1 шт				50.8×25.4×10.2 мм	—	—
TEL 15-1211 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEL 15-1212 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEL 15-1213 (TRACO)					50.8×25.4×10.2 мм	—	—
TEL 15-1222 (TRACO)					50.8×25.4×10.2 мм
TEL 15-1223 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEL 15-2410 (TRACO)	1 шт				50.8×25.4×10.2 мм	—	—
TEL 15-2411 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEL 15-2412 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEL 15-2413 (TRACO)	1 шт				50.8×25.4×10.2 мм	—	—
TEL 15-2422 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEL 15-2423 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEL 15-4810 (TRACO)					50.8×25.4×10.2 мм	—	—
TEL 15-4811 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEL 15-4812 (TRACO)	в линейках 2 шт				50.8×25.4×10.2 мм	—	—
TEL 15-4813 (TRACO)					50.8×25.4×10.2 мм	—	—
TEL 15-4822 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEL 15-4823 (TRACO)	1 шт				50.8×25.4×10.2 мм
TEL15-1210 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-1211 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-1212 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-1213 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-1222 (TRACO)			—	—	50.8×25.4×10.45 мм	—	—
TEL15-2410 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-2412 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-2413 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-4810 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-4811 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-4812 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-4813 (TRACO)		—	—	—	50.8×25.4×10.45 мм	—	—
TEL15-4822 (TRACO)			—	—	50.8×25.4×10.45 мм	—	—
TEL15-4823 (TRACO)			—	—	50.8×25.4×10.45 мм	—	—