Серия DC-DC модульных преобразователей TEN10

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Возможности
	Комплекс защит
	Схема параллельного включения
	Напряжение изоляции вход-выход
	Сертификаты медицинские
	Размер	50.8×25.4×10.2 мм
	Рабочая температура

Документация на серию TEN10

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 10 Series, 10 Watt Features ◆ Wide 2:1 input range ◆ High power density ◆ Operating temperature range nded fo me om not rec esign d w e n r in UL 60950-1 –40°C to +85°C ◆ Indefinite short circuit protection ◆ I/O isolation 1500 VDC ◆ Input filter to meet EN 55022, Class A and FCC, level A without external components ◆ Industry standard pinout ◆ Shielded metal case with insulated baseplate ◆ High reliability, MTBF >1 Mio. h ◆ 3-year product warranty The TEN 10 series is a family of high performance 10W DC/DC converters in a compact 2” x 1” low profile package with industry standard footprint. A high efficiency allows a wide operating temperature range of –40°C to +85°C. A built-in EMI filter is built in to meet EN 55022, class A without any external components. Further standard features include over voltage protection and short-circuit protection. Typical applications for these converters are battery operated equipment, instrumentation, distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Order code TEN 10-1210 TEN 10-1211 TEN 10-1212 TEN 10-1213 TEN 10-1215 TEN 10-1221 TEN 10-1222 TEN 10-1223 TEN 10-2410 TEN 10-2411 TEN 10-2412 TEN 10-2413 TEN 10-2415 TEN 10-2421 TEN 10-2422 TEN 10-2423 TEN 10-4810 TEN 10-4811 TEN 10-4812 TEN 10-4813 TEN 10-4815 TEN 10-4821 TEN 10-4822 TEN 10-4823 http://www.tracopower.com Input voltage range 9 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nomial) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 2’400 mA 2‘000 mA 830 mA 670 mA 415 mA ±1‘000 mA ±415 mA ±330 mA 2’400 mA 2‘000 mA 830 mA 670 mA 415 mA ±1‘000 mA ±415 mA ±330 mA 2‘400 mA 2‘000 mA 830 mA 670 mA 415 mA ±1‘000 mA ±415 mA ±330 mA Efficiency typ. 72 % 77 % 80 % 80 % 81 % 78 % 81 % 80 % 76 % 78 % 82 % 82 % 83 % 80 % 82 % 82 % 76 % 80 % 82 % 83 % 83 % 81 % 83 % 83 % Page 1 of 4

PDF

Документация на серию TEN10

Дата модификации: 14.02.2014

Размер: 176.6 Кб

4 стр.

DC/DC Converter TEN 10 Series 10 Watt Features Wide 2 : 1 Input Range High Power Density Operating Temp. Range – 40°C to +71°C Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Industry Standard Pinout Shielded Metal Case with insulated Baseplate High Reliability, MTBF >1 Mio. h 3 Year Product Warranty The TEN 10 series of DC/DC converters , comprising 24 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and a high efficiency. Models Ordercode TEN 10-1210 TEN 10-1211 TEN 10-1212 TEN 10-1213 TEN 10-1215 TEN 10-1221 TEN 10-1222 TEN 10-1223 TEN 10-2410 TEN 10-2411 TEN 10-2412 TEN 10-2413 TEN 10-2415 TEN 10-2421 TEN 10-2422 TEN 10-2423 TEN 10-4810 TEN 10-4811 TEN 10-4812 TEN 10-4813 TEN 10-4815 TEN 10-4821 TEN 10-4822 TEN 10-4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 9 – 18 VDC 3,3 5 12 15 24 ± 5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC VDC 2’400 2‘000 830 670 415 ± 1‘000 ± 415 ± 330 mA mA mA mA mA mA mA mA 72 77 80 80 81 78 81 80 % % % % % % % % 18 – 36 VDC 3,3 5 12 15 24 ± 5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC VDC 2‘400 2‘000 830 670 415 ± 1‘000 ± 415 ± 330 mA mA mA mA mA mA mA mA 76 78 82 82 83 80 82 82 % % % % % % % % 36 – 75 VDC 3,3 5 12 15 24 ± 5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC VDC 2‘400 2‘000 830 670 415 ± 1‘000 ± 415 ± 330 mA mA mA mA mA mA mA mA 76 80 82 83 83 81 83 83 % % % % % % % % Page 1

PDF

Документация на серию TEN10

ten10.pmd

Дата модификации: 23.11.2005

Размер: 447.3 Кб

3 стр.

найти TEN10.pdf

Товары серии TEN10

Наименование	Упаковка	U2	I2
TEN 10-1210 (TRACO)	в линейках 10 шт	—	—
TEN 10-1211 (TRACO)	в линейках 10 шт	—	—
TEN 10-1212 (TRACO)	в линейках 10 шт	—	—
TEN 10-1213 (TRACO)	10 шт	—	—
TEN 10-1215 (TRACO)	в линейках 10 шт	—	—
TEN 10-1221 (TRACO)	в линейках 10 шт
TEN 10-1222 (TRACO)	в линейках 10 шт
TEN 10-1223 (TRACO)	в линейках 10 шт
TEN 10-2410 (TRACO)	в линейках 10 шт	—	—
TEN 10-2411 (TRACO)	в линейках 10 шт	—	—
TEN 10-2412 (TRACO)	в линейках 10 шт	—	—
TEN 10-2413 (TRACO)	в линейках 10 шт	—	—
TEN 10-2415 (TRACO)	в линейках 10 шт	—	—
TEN 10-2421 (TRACO)	в линейках 10 шт
TEN 10-2422 (TRACO)	10 шт
TEN 10-2423 (TRACO)	в линейках 10 шт
TEN 10-4810 (TRACO)	в линейках 10 шт	—	—
TEN 10-4811 (TRACO)	в линейках 10 шт	—	—
TEN 10-4812 (TRACO)	в линейках 10 шт	—	—
TEN 10-4813 (TRACO)	в линейках 10 шт	—	—
TEN 10-4815 (TRACO)	в линейках 10 шт	—	—
TEN 10-4821 (TRACO)	в линейках 10 шт
TEN 10-4822 (TRACO)	в линейках 10 шт
TEN 10-4823 (TRACO)	в линейках 10 шт