Серия DC-DC модульных преобразователей TEN12WI

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Напряжение изоляции вход-выход
	Рабочая температура
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию TEN12WI

DC/DC Converters TEN 12WI Series, 12 Watt Features ended m ◆ Ultrawide 4 : 1 input range m o c not re ◆ Full SMD-design ◆ Input filter meets EN 55022, Class A and esign r new d fo in (UL1950) FCC, level A without external components ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Indefinite short-circuit protection Overvoltage protection I/O isolation 1500 VDC operating temperature range –40°C to 85°C Remote On/Off (optional) Insulated baseplate Industry standard pinout The TEN 12WI series is a family 12W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact 2“x1.0“ low profile package with industry-standard footprint. A high efficiency up to 84% allows operating temperatures from –40°C to +85°C. A built-in EMI input filter complies with EN 55022, class A without any external components. Further standard features include remote On/Off (optional), over voltage protection and continuous short-circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. 3-year product warranty Models Ordercode Output voltage Output current max. Efficiency typ. TEN 12-2410 3,3 VDC 2‘400 mA 78 % TEN 12-2411 5 VDC 2‘000 mA 82 % 12 VDC 1‘000 mA 84 % 15 VDC 800 mA 84 % ±5 VDC ±1‘000 mA 82 % TEN 12-2422 ±12 VDC ±500 mA 84 % TEN 12-2423 ±15 VDC ±400 mA 84 % TEN 12-4810 3,3 VDC 2‘400 mA 78 % TEN 12-4811 5 VDC 2‘000 mA 82 % 12 VDC 1‘000 mA 84 % 15 VDC 800 mA 84 % TEN 12-2412 TEN 12-2413 TEN 12-2421 TEN 12-4812 TEN 12-4813 Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) ±5 VDC ±1‘000 mA 82 % TEN 12-4822 ±12 VDC ±500 mA 84 % TEN 12-4823 ±15 VDC ±400 mA 84 % TEN 12-4821 http://www.tracopower.com Page 1 of 3

PDF

Документация на TEN 12-2410

Дата модификации: 06.10.2021

Размер: 212.4 Кб

3 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 12WI Series, 12 Watt Features ended m ◆ Ultrawide 4 : 1 input range m o c not re ◆ Full SMD-design ◆ Input filter meets EN 55022, Class A and esign r new d fo in (UL1950) FCC, level A without external components ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Indefinite short-circuit protection Overvoltage protection I/O isolation 1500 VDC operating temperature range -40°C to 85°C Remote On/Off (optional) Insulated baseplate Industry standard pinout The TEN 12WI series is a family 12W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact 2“x1.0“ low profile package with industry-standard footprint. A high efficiency up to 84% allows operating temperatures from –40°C to +85°C. A built-in EMI input filter complies with EN 55022, class A without any external components. Further standard features include remote On/Off (optional), over voltage protection and continuous short-circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. 3-year product warranty Models Ordercode Output voltage Output current max. Efficiency typ. TEN 12-2410 3,3 VDC 2‘400 mA 78 % TEN 12-2411 5 VDC 2‘000 mA 82 % 12 VDC 1‘000 mA 84 % 15 VDC 800 mA 84 % ±5 VDC ±1‘000 mA 82 % TEN 12-2422 ±12 VDC ±500 mA 84 % TEN 12-2423 ±15 VDC ±400 mA 84 % TEN 12-4810 3,3 VDC 2‘400 mA 78 % TEN 12-4811 5 VDC 2‘000 mA 82 % 12 VDC 1‘000 mA 84 % 15 VDC 800 mA 84 % TEN 12-2412 TEN 12-2413 TEN 12-2421 TEN 12-4812 TEN 12-4813 TEN 12-4821 Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) ±5 VDC ±1‘000 mA 82 % TEN 12-4822 ±12 VDC ±500 mA 84 % TEN 12-4823 ±15 VDC ±400 mA 84 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TEN12WI

Дата модификации: 17.04.2012

Размер: 159.4 Кб

3 стр.

DC/DC Converters TEN 12WI Series, 12 Watt RoHS compliant Features ◆ Ultrawide 4 : 1 Input Range ◆ Full SMD-Design ◆ Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Indeﬁnite Short-Circuit Protection Overvoltage Protection I/O-Isolation 1500 VDC Extended Temperature Operating Range -40°C to 85°C Remote On/Off (optional) Insulated Baseplate Industry Standard Pinout The TEN 12WI series is a family 12W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact 2“x1.0“ low proﬁle package with industry-standard footprint. A high efﬁciency up to 84% allows operating temperatures from –40°C to +85°C. A built-in EMI input ﬁlter complies with EN 55022, class A without any external components. Further standard features include remote On/Off (optional), over voltage protection and continuous short-circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. 3 Year Product Warranty Models Ordercode Input voltage range Output voltage Output current max. Efﬁciency typ. TEN 12-2410 3,3 VDC 2‘400 mA 78 % TEN 12-2411 5 VDC 2‘000 mA 82 % 12 VDC 1‘000 mA 84 % 15 VDC 800 mA 84 % TEN 12-2421 ± 5 VDC ± 1‘000 mA 82 % TEN 12-2422 ± 12 VDC ± 500 mA 84 % TEN 12-2423 ± 15 VDC ± 400 mA 84 % TEN 12-4810 3,3 VDC 2‘400 mA 78 % TEN 12-4811 5 VDC 2‘000 mA 82 % TEN 12-4812 12 VDC 1‘000 mA 84 % 15 VDC 800 mA 84 % TEN 12-4821 ± 5 VDC ± 1‘000 mA 82 % TEN 12-4822 ± 12 VDC ± 500 mA 84 % TEN 12-4823 ± 15 VDC ± 400 mA 84 % TEN 12-2412 TEN 12-2413 TEN 12-4813 http://www.tracopower.com 9 – 36 VDC 18 – 75 VDC Page 1 of 3

PDF

Документация на серию TEN12WI

TEN12.indd

Дата модификации: 15.05.2006

Размер: 174.8 Кб

3 стр.

найти TEN12WI.pdf

Товары серии TEN12WI

Наименование	Упаковка	Возможности	Защита	Шум	КПД	Размер	U2	I2
TEN 12-2410 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм	—	—
TEN 12-2411 (TRACO)	в линейках 10 шт		короткого замыкания, перенапряжения, перегрева			50.8×25.4×10.2 мм	—	—
TEN 12-2412 (TRACO)	в линейках 10 шт		короткого замыкания, перенапряжения, перегрева			50.8×25.4×10.2 мм	—	—
TEN 12-2413 (TRACO)	в линейках 10 шт		короткого замыкания, перенапряжения, перегрева			50.8×25.4×10.2 мм	—	—
TEN 12-2421 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм
TEN 12-2422 (TRACO)	в линейках 10 шт		короткого замыкания, перенапряжения, перегрева			50.8×25.4×10.2 мм
TEN 12-2423 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм
TEN 12-4810 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм	—	—
TEN 12-4810 LEAD (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм	—	—
TEN 12-4811 (TRACO)	в линейках 10 шт		короткого замыкания, перенапряжения, перегрева			50.8×25.4×10.2 мм	—	—
TEN 12-4812 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм	—	—
TEN 12-4813 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм	—	—
TEN 12-4821 (TRACO)	в линейках 10 шт		короткого замыкания, перенапряжения, перегрева			50.8×25.4×10.2 мм
TEN 12-4822 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм
TEN 12-4823 (TRACO)	в линейках 10 шт					50.8×25.4×10.2 мм
TEN12-4810 PBF (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 12W, Hybrid	—	—	—	50.8×25.4×10.7 мм	—	—
TEN12-4813 PBF (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 12W, Hybrid	—	—	—	50.8×25.4×10.7 мм	—	—