Серия DC-DC модульных преобразователей TEN15WI

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Комплекс защит
Напряжение изоляции вход-выход
Размер 50.8×25.4×10.2 мм
Рабочая температура

Документация на серию TEN15WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 15WI Series, 15 Watt Features ◆ Ultra-wide 4:1 input range ◆ High efficiency up to 86 % ◆ Extended operating temperature range UL 60950-1 nded mme o c e r t no –40°C to +85°C max. ign in des w e n r fo ◆ Indefinite short circuit protection ◆ I/O isolation 1500 VDC ◆ Built-in filter meets EN 55022, Class A and FCC, Level A without external components ◆ Remote On/Off ◆ ◆ ◆ ◆ Industry standard pinout Six-side shielded case Lead free design, fully RoHS compliant 3–year product warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of –40°C to +85°C. Models Ordercode Input voltage range TEN 15-2410WI TEN 15-2411WI TEN 15-2412WI 9 – 36 VDC Output voltage Output current max. Efficiency typ. 3,3 VDC 3’000 mA 78 % 5,1 VDC 2‘950 mA 82 % 12 VDC 1’250 mA 85 % ±12 VDC ±625 mA 85 % TEN 15-2423WI ±15 VDC ±500 mA 86 % TEN 15-4810WI 3,3 VDC 3’000 mA 78 % 5,1 VDC 2‘950 mA 82 % TEN 15-2422WI TEN 15-4811WI TEN 15-4812WI TEN 15-4822WI TEN 15-4823WI http://www.tracopower.com (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) 12 VDC 1’250 mA 85 % ±12 VDC ±625 mA 85 % ±15 VDC ±500 mA 86 % Page 1 of 3 PDF
Документация на серию TEN15WI 

Дата модификации: 14.02.2014

Размер: 170 Кб

3 стр.

DC/DC Converters TEN 15WI Series, 15 Watt RoHS compliant Features ◆ Ultra-wide 4:1 Input Range ◆ High Efficiency up to 86% ◆ Extended Operating Temperature Range UL 60950-1 –40 to +85°C max. ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 1500VDC ◆ Built-inFilter meets EN 55022, Class A and FCC, Level A without external Components ◆ ◆ ◆ ◆ ◆ Remote On/Off Industry Standard Pinout Six-Side shielded Case Lead free Design, fully RoHS compliant 3 Year Product Warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of -40°C to +85°C. Models Ordercode Input voltage range TEN 15-2410WI TEN 15-2411WI TEN 15-2412WI 9 – 36 VDC Output voltage Output current max. Efficiency typ. 3,3 VDC 3’000 mA 78 % 5,1 VDC 2‘950 mA 82 % 12 VDC 1’250 mA 85 % ± 12 VDC ± 625 mA 85 % TEN 15-2423WI ± 15 VDC ± 500 mA 86 % TEN 15-4810WI 3,3 VDC 3’000 mA 78 % 5,1 VDC 2‘950 mA 82 % TEN 15-2422WI TEN 15-4811WI TEN 15-4812WI TEN 15-4822WI TEN 15-4823WI http://www.tracopower.com (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) 12 VDC 1’250 mA 85 % ± 12 VDC ± 625 mA 85 % ± 15 VDC ± 500 mA 86 % Page  of 3 PDF
Документация на серию TEN15WI 

Дата модификации: 20.09.2006

Размер: 89.5 Кб

3 стр.

    Товары серии TEN15WI

    Наименование i Упаковка Каналов U вх Выход Возможности U вх ном. U1 I1 Шум КПД U2 I2
    TEN 15-2410WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    TEN 15-2411WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    TEN 15-2412WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    TEN 15-2422WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 2; U вх:... в линейках 10 шт
    TEN 15-2423WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 2; U вх:... в линейках 10 шт
    TEN 15-4810WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    TEN 15-4811WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 1; U вх:... в линейках 10 шт
    TEN 15-4812WI (TRACO) в линейках 10 шт
    TEN 15-4822WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 2; U вх:... в линейках 10 шт
    TEN 15-4823WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 15 Вт; #: 2; U вх:... в линейках 10 шт