Серия DC-DC модульных преобразователей TEN20

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Комплекс защит
	Схема параллельного включения
	Напряжение изоляции вход-выход
	Сертификаты медицинские
	Рабочая температура

Документация на серию TEN20

DC/DC Converters TEN 20 Series, 20 Watt Features ◆ Wide 2:1 input range ◆ High efficiency up to 89 % ◆ Extended operating temperature range UL 60950-1 –40°C to +85°C ◆ ◆ ◆ ◆ Indefinite short circuit protection I/O isolation 1500VDC Remote On/Off Input filter meets EN 55022, Class A and FCC, level A without external components ◆ Industry standard pinout ◆ Shielded metal case with insulated ◆ baseplate 3-year product warranty The TEN 20 series of DC/DC converters, comprising 18 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of –40°C to +85°C. Models Output voltage Output current max. Efficiency typ. TEN 20-1210 Order code 3,3 VDC 4’000 mA 81 % TEN 20-1211 5 VDC 4‘000 mA 84 % 12 VDC 1’670 mA 88 % 15 VDC 1‘340 mA 88 % TEN 20-1212 TEN 20-1213 TEN 20-1222 Input voltage range 9 – 18 VDC (12 VDC nominal) ±12 VDC ±835 mA 88 % TEN 20-1223 ±15 VDC ±670 mA 88 % TEN 20-2410 3,3 VDC 4’000 mA 82 % TEN 20-2411 5 VDC 4‘000 mA 85 % TEN 20-2412 18 – 36 VDC 12 VDC 1‘670 mA 89 % TEN 20-2413 (24 VDC nominal) 15 VDC 1‘340 mA 89 % TEN 20-2422 ±12 VDC ±835 mA 89 % TEN 20-2423 ±15 VDC ±670 mA 89 % TEN 20-4810 3,3 VDC 4‘000 mA 82 % TEN 20-4811 5 VDC 4‘000 mA 85 % TEN 20-4812 36 – 75 VDC 12 VDC 1‘670 mA 89 % TEN 20-4813 (48 VDC nominal) 15 VDC 1‘340 mA 89 % TEN 20-4822 ±12 VDC ±835 mA 89 % TEN 20-4823 ±15 VDC ±670 mA 89 % http://www.tracopower.com Page 1 of 3

PDF

Документация на TEN20-4813

Дата модификации: 07.05.2021

Размер: 249.7 Кб

3 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

PDF

Документация на серию TEN20

Дата модификации: 14.02.2014

Размер: 173.5 Кб

3 стр.

DC/DC Converter TEN 20 Series Features 20 Watt RoHS compliant Wide 2 : 1 Input Range UL 60950 High Efficiency up to 89% Extended Operating Temperature Range –40°C to +85°C Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Remote On/Off Input Filter meets EN 55022, Class A and FCC, Level A without external Components Industry Standard Pinout Shielded Metal Case with insulated Baseplate The TEN 20 series of DC/DC converters , comprising 18 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of -40°C to +85°C. 3 Year Product Warranty Models Ordercode TEN 20-1210 TEN 20-1211 TEN 20-1212 TEN 20-1213 TEN 20-1222 TEN 20-1223 TEN 20-2410 TEN 20-2411 TEN 20-2412 TEN 20-2413 TEN 20-2422 TEN 20-2423 TEN 20-4810 TEN 20-4811 TEN 20-4812 TEN 20-4813 TEN 20-4822 TEN 20-4823 www.tracopower.com Input voltage range 9 – 18 VDC 18 – 36 VDC 36 – 75 VDC Output voltage Output current max. Efficiency typ. 3,3 5 12 15 ± 12 ± 15 VDC VDC VDC VDC VDC VDC 4’000 4‘000 1’670 1’340 ± 835 ± 670 mA mA mA mA mA mA 81 % 84 % 88 % 88 % 88 % 88 % 3,3 5 12 15 ± 12 ± 15 VDC VDC VDC VDC VDC VDC 4’000 4‘000 1’670 1’340 ± 835 ± 670 mA mA mA mA mA mA 82 % 85 % 89 % 89 % 89 % 89 % 3,3 5 12 15 ± 12 ± 15 VDC VDC VDC VDC VDC VDC 4’000 4‘000 1’670 1’340 ± 835 ± 670 mA mA mA mA mA mA 82 % 85 % 89 % 89 % 89 % 89 % Page 1 of 3

PDF

Документация на серию TEN20

TEN20.PMD

Дата модификации: 07.06.2006

Размер: 71.1 Кб

3 стр.

найти TEN20.pdf

Товары серии TEN20

Наименование	Упаковка	Возможности	Шум	КПД	Размер	U2	I2
TEN 20-1210 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-1210 LEAD (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-1211 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-1212 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-1213 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-1222 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEN 20-1223 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEN 20-2410 (TRACO)	10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-2411 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-2412 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-2413 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-2422 (TRACO)	10 шт				50.8×25.4×10.2 мм
TEN 20-2423 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEN 20-4810 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-4811 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-4812 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-4813 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм	—	—
TEN 20-4822 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEN 20-4823 (TRACO)	в линейках 10 шт				50.8×25.4×10.2 мм
TEN20-1213 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid	—	—	50.8×25.4×10.7 мм	—	—
TEN20-1223 (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid	—	—	50.8×25.4×10.7 мм	—	—
TEN20-2423 (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid	—	—	50.8×25.4×10.7 мм	—	—
TEN20-4810 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid	—	—	50.8×25.4×10.7 мм	—	—
TEN20-4812 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid	—	—	50.8×25.4×10.7 мм	—	—
TEN20-4813 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid	—	—	50.8×25.4×10.7 мм	—	—