Серия DC-DC модульных преобразователей TEN25

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Рабочая температура

Документация на серию TEN25

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 25 Series, 25/30 Watt Features ◆ Wide 2:1 input range ◆ Very high efficiency up to 89% ◆ Extended operating temperature not sign e d w e rn d fo ende m m o c re in range –40°C to +85°C ◆ ◆ ◆ ◆ ◆ ◆ Adjustable output voltage Remote On/Off Continuous short circuit protection Over voltage protection I/O isolation 1500 VDC Input filter meets EN 55022, Class A and FCC, Level A without external components ◆ Lead free design - RoHS compliant ◆ 3-year product warranty The TEN 25 series is a range of isolated DC/DC converters with high power density in a 51x41x9.5mm shielded metal case. All 18 models have a wide 2:1 input voltage range. The very high efficiency allows a safe operating temperature range of –40°C to +85°C. Other features are internal EMI-filter to meet EN55022, class A and remote On/Off. Typical applications for these converter modules are industrial electronics, communication systems, battery operated equipment and distributed power systems. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 25-1210 3.3 VDC 5’500 mA 81 % TEN 25-1211 5 VDC 5‘000 mA 84 % TEN 25-1212 9 – 18 VDC 12 VDC 2‘500 mA 88 % TEN 25-1213 (12 VDC nominal) 15 VDC 2‘000 mA 88 % TEN 25-1222 ±12 VDC ±1‘250 mA 88 % TEN 25-1223 ±15 VDC ±1‘000 mA 88 % TEN 25-2410 3.3 VDC 5’500 mA 82 % TEN 25-2411 5 VDC 5‘000 mA 85 % TEN 25-2412 18 – 36 VDC 12 VDC 2‘500 mA 89 % TEN 25-2413 (24 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-2422 ±12 VDC ±1‘250 mA 89 % TEN 25-2423 ±15 VDC ±1‘000 mA 89 % TEN 25-4810 3,3 VDC 5’500 mA 82 % TEN 25-4811 5 VDC 5‘000 mA 85 % TEN 25-4812 36 – 75 VDC 12 VDC 2‘500 mA 89 % TEN 25-4813 (48 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-4822 ±12 VDC ±1‘250 mA 89 % TEN 25-4823 ±15 VDC ±1‘000 mA 89 % http://www.tracopower.com Page 1 of 3 PDF
Документация на TEN25-1222 

ten25

Дата модификации: 11.07.2018

Размер: 209.6 Кб

3 стр.

DC/DC Converters TEN 25 Series, 25/30 Watt Features ◆ Wide 2:1 input range ◆ Very high efficiency up to 89% ◆ Extended operating temperature not sign e d w e rn d fo ende m m o c re in range –40°C to +85°C ◆ ◆ ◆ ◆ ◆ ◆ Adjustable output voltage Remote On/Off Continuous short circuit protection Over voltage protection I/O isolation 1500 VDC Input filter meets EN 55022, Class A and FCC, Level A without external components ◆ Lead free design - RoHS compliant ◆ 3-year product warranty The TEN 25 series is a range of isolated DC/DC converters with high power density in a 51x41x9.5mm shielded metal case. All 18 models have a wide 2:1 input voltage range. The very high efficiency allows a safe operating temperature range of –40°C to +85°C. Other features are internal EMI-filter to meet EN55022, class A and remote On/Off. Typical applications for these converter modules are industrial electronics, communication systems, battery operated equipment and distributed power systems. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 25-1210 3.3 VDC 5’500 mA 81 % TEN 25-1211 5 VDC 5‘000 mA 84 % TEN 25-1212 9 – 18 VDC 12 VDC 2‘500 mA 88 % TEN 25-1213 (12 VDC nominal) 15 VDC 2‘000 mA 88 % TEN 25-1222 ±12 VDC ±1‘250 mA 88 % TEN 25-1223 ±15 VDC ±1‘000 mA 88 % TEN 25-2410 3.3 VDC 5’500 mA 82 % TEN 25-2411 5 VDC 5‘000 mA 85 % TEN 25-2412 18 – 36 VDC 12 VDC 2‘500 mA 89 % TEN 25-2413 (24 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-2422 ±12 VDC ±1‘250 mA 89 % TEN 25-2423 ±15 VDC ±1‘000 mA 89 % TEN 25-4810 3,3 VDC 5’500 mA 82 % TEN 25-4811 5 VDC 5‘000 mA 85 % TEN 25-4812 36 – 75 VDC 12 VDC 2‘500 mA 89 % TEN 25-4813 (48 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-4822 ±12 VDC ±1‘250 mA 89 % TEN 25-4823 ±15 VDC ±1‘000 mA 89 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TEN25 

ten25

Дата модификации: 10.01.2014

Размер: 211.4 Кб

3 стр.

DC/DC Converters TEN 25 Series, 25/30 Watt RoHS compliant Features ◆ Wide 2:1 Input Range ◆ Very high Efficiency up to 89% ◆ Extended Operating Temperature ◆ Range –40°C to +85°C ◆ Adjustable Output Voltage ◆ Remote On/Off ◆ Continuous Short Circuit Protection ◆ Over Voltage Protection ◆ I/O-Isolation 1500 VDC ◆ Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ Lead free Design - RoHS compliant ◆ 3 Year Product Warranty The TEN 25 series is a range of isolated DC/DC converters with high power density in a 51x41x9.5mm shielded metal case. All 18 models have a wide 2:1 input voltage range. The very high efficiency allows a safe operating temperature range of –40°C to +85°C. Other features are internal EMI-filter to meet EN55022, class A and remote On/Off. Typical applications for these converter modules are industrial electronics, communication systems, battery operated equipment and distributed power systems. Models Ordercode Output voltage Output current max. Efficiency typ. TEN 25-1210 3.3 VDC 5’500 mA 81 % TEN 25-1211 5 VDC 5‘000 mA 84 % 12 VDC 2‘500 mA 88 % 15 VDC 2‘000 mA 88 % TEN 25-1222 ± 12 VDC ± 1‘250 mA 88 % TEN 25-1223 ± 15 VDC ± 1‘000 mA 88 % TEN 25-2410 3.3 VDC 5’500 mA 82 % TEN 25-2411 5 VDC 5‘000 mA 85 % 12 VDC 2‘500 mA 89 % 15 VDC 2‘000 mA 89 % TEN 25-2422 ± 12 VDC ± 1‘250 mA 89 % TEN 25-2423 ± 15 VDC ± 1‘000 mA 89 % TEN 25-4810 3,3 VDC 5’500 mA 82 % TEN 25-4811 5 VDC 5‘000 mA 85 % TEN 25-1212 TEN 25-1213 TEN 25-2412 TEN 25-2413 TEN 25-4812 Input voltage range 9 – 18 VDC 18 – 36 VDC 12 VDC 2‘500 mA 89 % 15 VDC 2‘000 mA 89 % TEN 25-4822 ± 12 VDC ± 1‘250 mA 89 % TEN 25-4823 ± 15 VDC ± 1‘000 mA 89 % TEN 25-4813 http://www.tracopower.com 36 – 75 VDC Page  of 3 PDF
Документация на серию TEN25 

ten25

Дата модификации: 14.07.2006

Размер: 118.5 Кб

3 стр.

    Товары серии TEN25

    Наименование i Упаковка P вых Каналов U вх Выход Возможности Защита U вх ном. U1 I1 Шум КПД Размер U2 I2
    TEN 25-1210 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-1210 LEAD (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-1211 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-1212 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт подстройка выхода, дистанционное управление 50.8×40.6×9.3 мм
    TEN 25-1213 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-1222 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 2; U в... 5 шт 50.8×40.6×9.3 мм
    TEN 25-1223 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 2; U в... в линейках 5 шт подстройка выхода, дистанционное управление 50.8×40.6×9.3 мм
    TEN 25-2410 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт короткого замыкания, перенапряжения, перегрева 50.8×40.6×9.3 мм
    TEN 25-2411 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-2412 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-2413 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-2422 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 2; U в... в линейках 10 шт 50.8×40.6×9.3 мм
    TEN 25-2423 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 2; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-4810 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-4811 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 10 шт короткого замыкания, перенапряжения, перегрева 50.8×40.6×9.3 мм
    TEN 25-4812 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-4813 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 1; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN 25-4822 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 2; U в... в линейках 5 шт подстройка выхода, дистанционное управление 50.8×40.6×9.3 мм
    TEN 25-4823 (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 2x1.6 inch; P вых: 25 Вт; #: 2; U в... в линейках 5 шт 50.8×40.6×9.3 мм
    TEN25-1222 (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 30W, Hybrid 50.8×40.6×10 мм
    TEN25-4813 (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid 50.8×40.6×10 мм
    TEN25-4822 (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 30W, Hybrid 50.8×40.6×10 мм