Серия DC-DC модульных преобразователей TEN3N

TRACO

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Возможности
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Рабочая температура

Документация на серию TEN3N

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 3N Series, 3 Watt CB Features ◆ Wide 2 : 1 input range ◆ Input filter to meet EN 55022, class A Scheme IEC 60950-1 UL 60950-1 and FCC, level A without external components ◆ Extended operating temperature range –40°C to +85°C ◆ Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) ◆ High reliability, MTBF >1.0 Mio. h ◆ 3-year product warranty The TEN 3N Series is a drop in replacement of the prevalent TEN 3 Series. The upto date design enables a cost reduction without any compromise to reliability and function. They come with an internal filter to meet EN55022 class A without external components. Increased EMC immunity and extended operating temperature range of –40°C to +85°C make these converters an ideal solution for cost critical but demanding applications. With the standard pinning it is a drop in replacement for common 3 Watt converters in DIP-24 package. Models 1500 VDC Ordercode 3000 VDC TEN 3-0510N TEN 3-0511N TEN 3-0511N-HI TEN 3-0512N TEN 3-0512N-HI TEN 3-0513N TEN 3-0513N-HI TEN 3-0515N TEN 3-0515N-HI TEN 3-0521N TEN 3-0521N-HI TEN 3-0522N TEN 3-0522N-HI TEN 3-0523N TEN 3-0523N-HI TEN 3-1210N TEN 3-1211N TEN 3-1212N TEN 3-1213N TEN 3-1215N TEN 3-1221N TEN 3-1222N TEN 3-1223N TEN 3-2410N Models with high TEN 3-2411N isolation available TEN 3-2412N from TEN 3WIN TEN 3-2413N series: TEN 3-2415N www.tracopower. TEN 3-2421N com/products/tenTEN 3-2422N 3win.pdf TEN 3-2423N TEN 3-4810N TEN 3-4811N TEN 3-4812N TEN 3-4813N TEN 3-4815N TEN 3-4821N TEN 3-4822N TEN 3-4823N http://www.tracopower.com Input voltage range 4.5 – 9.0 VDC (nominal 5 VDC) 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Output voltage 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC Output current max. 750 mA 600 mA 250 mA 200 mA 125 mA ±250 mA ±125 mA ±100 mA 750 mA 600 mA 250 mA 200 mA 125 mA ±250 mA ±125 mA ±100 mA 750 mA 600 mA 250 mA 200 mA 125 mA ±250 mA ±125 mA ±100 mA 750 mA 600 mA 250 mA 200 mA 125 mA ±250 mA ±125 mA ±100 mA Efficiency typ. 77 % 80 % 82 % 82 % 81 % 80 % 82 % 82 % 79 % 81 % 85 % 85 % 84 % 80 % 84 % 84 % 79 % 81 % 85 % 85 % 84 % 80 % 84 % 84 % 79 % 81 % 85 % 85 % 84 % 80 % 84 % 84 % Page 1 of 4

PDF

Документация на серию TEN3N

ten3

Дата модификации: 23.03.2015

Размер: 151.3 Кб

4 стр.

найти TEN3N.pdf

Товары серии TEN3N

Наименование	Упаковка	Размер	U2	I2
TEN 3-0510N (TRACO)		31.8×20.3×10.2 мм	—	—
TEN 3-0511N (TRACO)		31.8×20.3×10.2 мм	—	—
TEN 3-0512N (TRACO)	в линейках 10 шт	31.8×20.3×10.2 мм	—	—
TEN 3-0513N (TRACO)		31.8×20.3×10.2 мм	—	—
TEN 3-0515N (TRACO)	в линейках 10 шт	32×20.3×10.2 мм	—	—
TEN 3-0521N (TRACO)		31.8×20.3×10.2 мм
TEN 3-0522N (TRACO)		31.8×20.3×10.2 мм
TEN 3-0523N (TRACO)		31.8×20.3×10.2 мм
TEN 3-1210N (TRACO)		31.8×20.3×10.2 мм	—	—
TEN 3-1211N (TRACO)	10 шт	31.8×20.3×10.2 мм	—	—
TEN 3-1212N (TRACO)		31.8×20.3×10.2 мм	—	—
TEN 3-1213N (TRACO)	2 шт	31.8×20.3×10.2 мм	—	—
TEN 3-1215N (TRACO)	10 шт	31.8×20.3×10.2 мм	—	—
TEN 3-1221N (TRACO)	в линейках 10 шт	31.8×20.3×10.2 мм
TEN 3-1222N (TRACO)	20 шт	31.8×20.3×10.2 мм
TEN 3-1223N (TRACO)	1 шт	31.8×20.3×10.2 мм
TEN 3-2410N (TRACO)	5 шт	31.8×20.3×10.2 мм	—	—
TEN 3-2411N (TRACO)	1 шт	31.8×20.3×10.2 мм	—	—
TEN 3-2412N (TRACO)	в линейках 10 шт	31.8×20.3×10.2 мм	—	—
TEN 3-2413N (TRACO)	7 шт	31.8×20.3×10.2 мм	—	—
TEN 3-2415N (TRACO)	1 шт	31.8×20.3×10.2 мм	—	—
TEN 3-2421N (TRACO)	10 шт	31.8×20.3×10.2 мм
TEN 3-2422N (TRACO)		31.8×20.3×10.2 мм
TEN 3-2423N (TRACO)	10 шт	31.8×20.3×10.2 мм
TEN 3-4810N (TRACO)	10 шт	31.8×20.3×10.2 мм	—	—
TEN 3-4811N (TRACO)	40 шт	31.8×20.3×10.2 мм	—	—
TEN 3-4812N (TRACO)	3 шт	31.8×20.3×10.2 мм	—	—
TEN 3-4813N (TRACO)		31.8×20.3×10.2 мм	—	—
TEN 3-4815N (TRACO)	1 шт	31.8×20.3×10.2 мм	—	—
TEN 3-4821N (TRACO)		31.8×20.3×10.2 мм
TEN 3-4822N (TRACO)	в ленте 10 шт	31.8×20.3×10.2 мм
TEN 3-4823N (TRACO)		31.8×20.3×10.2 мм