Серия DC-DC модульных преобразователей TEN3WIN

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Возможности
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 31.8×20.3×10.2 мм
Рабочая температура

Документация на серию TEN3WIN

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 3WIN Series, 3 Watt CB Scheme IEC 60950-1 UL 60950-1 Features ◆ Ultra wide 4 : 1 input range ◆ Input filter to meet EN 55032, Class A and FCC, level A without external components ◆ Extended operating temperature range –40°C to 85°C ◆ Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) ◆ DIP-24 package ◆ High reliability, MTBF >1.0 Mio. h ◆ 3-year product warranty The TEN 3WIN Series is a drop in replacement of the prevalent TEN 3WI Series. The up-to date design enables a cost reduction without any compromise to reliability and function. They come with an internal filter to meet EN55032 class A without external components. Increased EMC immunity and extended operating temperature range of -40°C to 85°C make these converters an ideal solution for cost critical but demanding applications. With the standard pinning it is a drop in replacement for common 3 Watt converters in DIP24 package. Models Ordercode 1500 VDC isolation 3000 VDC isolation TEN 3-2410WIN TEN 3-2411WIN TEN 3-2412WIN TEN 3-2413WIN TEN 3-2415WIN TEN 3-2421WIN TEN 3-2422WIN TEN 3-2423WIN TEN 3-4810WIN TEN 3-4811WIN TEN 3-4812WIN TEN 3-4813WIN TEN 3-4815WIN TEN 3-4821WIN TEN 3-4822WIN TEN 3-4823WIN TEN 3-2411WIN-HI TEN 3-2412WIN-HI TEN 3-2413WIN-HI TEN 3-2415WIN-HI TEN 3-2421WIN-HI TEN 3-2422WIN-HI TEN 3-2423WIN-HI TEN 3-4811WIN-HI TEN 3-4812WIN-HI TEN 3-4813WIN-HI TEN 3-4815WIN-HI TEN 3-4821WIN-HI TEN 3-4822WIN-HI TEN 3-4823WIN-HI http://www.tracopower.com Input voltage range 9.0 – 36 VDC (nominal 24 VDC) 18 – 75 VDC (nominal 48 VDC) Output voltage 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC Output current max. 750 mA 600 mA 250 mA 200 mA 125 mA ±250 mA ±125 mA ±100 mA 750 mA 600 mA 250 mA 200 mA 125 mA ±250 mA ±125 mA ±100 mA Efficiency max. 77 % 79 % 82 % 83 % 81 % 80 % 82 % 82 % 77 % 80 % 83 % 84 % 82 % 80 % 82 % 82 % Page 1 of 4 PDF
Документация на серию TEN3WIN 

ten3

Дата модификации: 28.03.2018

Размер: 200.2 Кб

4 стр.

    Товары серии TEN3WIN

    Наименование i Упаковка Каналов U вх Выход U вх ном. U1 I1 КПД U2 I2
    TEN 3-2410WIN (TRACO)
     
     
    		 1 шт — —
    TEN 3-2411WIN (TRACO)
     
     
    		 в линейках 10 шт — —
    TEN 3-2412WIN (TRACO)
     
     
    		 1 шт — —
    TEN 3-2413WIN (TRACO)
     
     
    		 в линейках 10 шт — —
    TEN 3-2415WIN (TRACO)
     
     
    		 1 шт — —
    TEN 3-2421WIN (TRACO)
     
     
    		 5 шт — —
    TEN 3-2422WIN (TRACO)
     
     
    		 1 шт
    TEN 3-2423WIN (TRACO)
     
     
    		 в линейках 10 шт
    TEN 3-4810WIN (TRACO)
     
     
    		 в линейках 10 шт — —
    TEN 3-4811WIN (TRACO)
     
     
    		 в линейках 10 шт — —
    TEN 3-4812WIN (TRACO)
     
     
    		 1 шт — —
    TEN 3-4813WIN (TRACO)
     
     
    		 в линейках 30 шт — —
    TEN 3-4815WIN (TRACO)
     
     
    		 — —
    TEN 3-4821WIN (TRACO)
     
     
    		 в линейках 10 шт — —
    TEN 3-4822WIN (TRACO)
     
     
    TEN 3-4823WIN (TRACO)
     
     
    		 2 шт