Серия DC-DC модульных преобразователей TEN50

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Количество каналов
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию TEN50

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 50 Series, 50 Watt g CpBendin Features ◆ Highest power density: Scheme 50 W in 1” x 2” x 0.4” package ◆ Excellent efficiency up to 92 % ◆ Operating temperature range –40°C to +85°C ◆ ◆ ◆ ◆ ◆ No minimum load required Output voltage adjustable Remote On/Off I/O isolation 1500 VDC 3-year product warranty The TEN 50 Series is a range of isolated high �� performance dc-dc converter mod� ules. Due to the very high efficiency of up to 92% and the use of highest reli� able components these 50 W converters come with a footprint of only 1.0” x 2.0”. The 12 models have a wide 2:1 input voltage range and a tight output volt� age regulation. They do not need a minimum load and a offer a high efficiency also at low load conditions. The output voltage is adjustable by external resistor. Remote On/Off and protection against overload and short circuit are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency 3.3 VDC 10‘000 mA 89 % 5.0 VDC 10’000 mA 90 % 12 VDC 4‘167 mA 91 % 15 VDC 3‘333 mA 91 % TEN 50-1215 24 VDC 2‘080 mA 91 % TEN 50-2410 3.3 VDC 10‘000 mA 89 % 5.0 VDC 10’000 mA 92 % 12 VDC 4‘167 mA 92 % 15 VDC 3‘333 mA 92 % TEN 50-2415 24 VDC 2‘080 mA 91 % TEN 50-4810 3.3 VDC 10‘000 mA 89 % 5.0 VDC 10’000 mA 92 % 12 VDC 4‘167 mA 92 % 15 VDC 3‘333 mA 92 % 24 VDC 2‘080 mA 91 % TEN 50-1210 TEN 50-1211 TEN 50-1212 TEN 50-1213 TEN 50-2411 TEN 50-2412 TEN 50-2413 TEN 50-4811 TEN 50-4812 TEN 50-4813 TEN 50-4815 http://www.tracopower.com 9 – 18 VDC (nominal 12 VDC) 18 – 36 VDC (nominal 24 VDC) 36 – 75 VDC (nominal 48 VDC) Page 1 of 4

PDF

Документация на серию TEN50

Дата модификации: 01.02.2013

Размер: 314.8 Кб

4 стр.

найти TEN50.pdf

Товары серии TEN50

Наименование	Упаковка	Возможности	U вх ном.	КПД	Размер
TEN 50-1210 (TRACO)	2 шт				50.8×25.4×11 мм
TEN 50-1211 (TRACO)	2 шт				50.8×25.4×11 мм
TEN 50-1212 (TRACO)	в линейках 10 шт				50.8×25.4×11 мм
TEN 50-1213 (TRACO)	1 шт				50.8×25.4×11 мм
TEN 50-1215 (TRACO)	1 шт				50.8×25.4×11 мм
TEN 50-2410 (TRACO)					50.8×25.4×11 мм
TEN 50-2411 (TRACO)	1 шт				50.8×25.4×11 мм
TEN 50-2412 (TRACO)	в линейках 10 шт				50.8×25.4×11 мм
TEN 50-2415 (TRACO)	2 шт				50.8×25.4×11 мм
TEN 50-4810 (TRACO)					50.8×25.4×11 мм
TEN 50-4811 (TRACO)	5 шт				50.8×25.4×11 мм
TEN 50-4812 (TRACO)	21 шт				50.8×25.4×11 мм
TEN 50-4813 (TRACO)					50.8×25.4×11 мм
TEN 50-4815 (TRACO)					50.8×25.4×11 мм
TEN50-1210 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 33W	—	—	50.8×25.4×11 мм
TEN50-1211 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-1212 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-1213 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-1215 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-2410 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 33W	—	—	50.8×25.4×11 мм
TEN50-2410WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 33W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-2411 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-2411WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-2412 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-2412WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-2413 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-2413WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 49.95W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-2415 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-2415WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 49.92W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-4810 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 33W	—	—	50.8×25.4×11 мм
TEN50-4810WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 33W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-4811 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-4811WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-4812 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-4812WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-4813 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-4813WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 49.95W, Hybrid		—	50.8×25.4×11.25 мм
TEN50-4815 (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 50W	—	—	50.8×25.4×11 мм
TEN50-4815WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 49.92W, Hybrid		—	50.8×25.4×11.25 мм