Серия DC-DC модульных преобразователей TEN5WI

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Возможности
Комплекс защит
Напряжение изоляции вход-выход
Размер 32×20.3×10.2 мм
Рабочая температура
Схема параллельного включения
Сертификаты медицинские

Документация на серию TEN5WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 5WI Series, 6 Watt CB Scheme Features ◆ Ultra wide 4:1 input range ◆ DIP-24 Package with standard pinout ◆ Full SMD design ◆ Extended operating temperature range UL 60950-1 –40°C to +85°C max. ◆ ◆ ◆ ◆ ◆ High efficiency Excellent load and line regulation Indefinite short circuit protection I/O isolation 1500VDC Built-inFilter to meet EN 55022, Class A and FCC, level A ◆ Lead-free design, fully RoHS compliant ◆ 3-year product warranty The TEN 5WI series is a family of high performance dc-dc converter modules with 5 W output power, featuring ultra wide input voltage ranges of 9 - 36 VDC or 18 - 75 VDC. They come in a shielded DIP-24 metal package with industry-standard footprint. A high efficiency allows –40°C to +70°C operation ambient temperatures at full load. Standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where a wide input voltage range is required. Models Ordercode Output voltage Output current max. Efficiency typ. TEN 5-2410WI 3.3 VDC 1200 mA 75 % TEN 5-2411WI 5 VDC 1000 mA 78 % 12 VDC 500 mA 83 % 15 VDC 400 mA 82 % ±5 VDC ±500 mA 78 % TEN 5-2422WI ±12 VDC ±250 mA 83 % TEN 5-2423WI ±15 VDC ±200 mA 82 % TEN 5-4810WI 3.3 VDC 1200 mA 75 % TEN 5-4811WI 5 VDC 1000 mA 78 % 12 VDC 500 mA 83 % 15 VDC 400 mA 82 % ±5 VDC ±500 mA 78 % TEN 5-4822WI ±12 VDC ±250 mA 83 % TEN 5-4823WI ±15 VDC ±200 mA 82 % TEN 5-2412WI TEN 5-2413WI TEN 5-2421WI TEN 5-4812WI TEN 5-4813WI TEN 5-4821WI http://www.tracopower.com Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Page 1 of 3 PDF
Документация на серию TEN5WI 

Дата модификации: 21.09.2012

Размер: 181.1 Кб

3 стр.

DC/DC Converters TEN 5WI Series, 6 Watt RoHS compliant Features ◆ Ultra-wide 4:1 Input Range ◆ DIP-24 Package with Standard Pinout ◆ Full SMD Design ◆ Ext.ended Operating Temperature Range UL 60950-1 –40 to +85°C max. ◆ ◆ ◆ ◆ ◆ High Efficiency Excellent Load and Line Regulation Indefinite Short-circuit Protection I/O-Isolation 1500VDC Built-inFilter meets EN 55022, Class A and FCC, Level A ◆ Lead-free Design, fully RoHS compliant ◆ 3 Year Product Warranty The TEN 5WI series is a family of high performance dc-dc converter modules with 5W output power, featuring ultra wide input voltage ranges of 9-36VDC or 18-75VDC. They come in a shielded DIP-24 metal package with industry-standard footprint. A high efficiency allows –40°c to +70°C operation ambient temperatures at full load. Standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication,instrumentation and industrial electronics, everywhere where a wide input voltage range is required. Models Ordercode Output voltage Output current max. Efficiency typ. TEN 5-2410WI 3.3 VDC 1200 mA 76 % TEN 5-2411WI 5 VDC 1000 mA 79 % TEN 5-2412WI Input voltage range 12 VDC 500 mA 84 % 15 VDC 400 mA 83 % ± 5 VDC ± 500 mA 79 % TEN 5-2422WI ± 12 VDC ± 250 mA 84 % TEN 5-2423WI ± 15 VDC ± 200 mA 83 % TEN 5-4810WI 3.3 VDC 1200 mA 76 % TEN 5-4811WI 5 VDC 1000 mA 79 % 12 VDC 500 mA 84 % 15 VDC 400 mA 83 % TEN 5-2413WI TEN 5-2421WI TEN 5-4812WI TEN 5-4813WI TEN 5-4821WI 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) ± 5 VDC ± 500 mA 79 % TEN 5-4822WI ± 12 VDC ± 250 mA 84 % TEN 5-4823WI ± 15 VDC ± 200 mA 83 % http://www.tracopower.com Page  of 3 PDF
Документация на серию TEN5WI 

Дата модификации: 07.09.2006

Размер: 99.3 Кб

3 стр.

    Товары серии TEN5WI

    Наименование i Упаковка P вых Каналов U вх Выход U вх ном. U1 I1 Шум КПД U2 I2
    TEN 5-2410WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 1; U вх: 9..... в линейках 10 шт — —
    TEN 5-2411WI (TRACO)
     
    		в линейках 10 шт — —
    TEN 5-2412WI (TRACO)
     
    		в линейках 10 шт — —
    TEN 5-2413WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 1; U вх: 9..... в линейках 10 шт — —
    TEN 5-2421WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 2; U вх: 9..... в линейках 10 шт
    TEN 5-2422WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 2; U вх: 9..... в линейках 10 шт
    TEN 5-2423WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 2; U вх: 9..... в линейках 10 шт
    TEN 5-4810WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 1; U вх: 18.... в линейках 10 шт — —
    TEN 5-4811WI (TRACO)
     
    		в линейках 10 шт — —
    TEN 5-4812WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 1; U вх: 18.... в линейках 10 шт — —
    TEN 5-4813WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 1; U вх: 18.... в линейках 10 шт — —
    TEN 5-4821WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 2; U вх: 18.... в линейках 10 шт
    TEN 5-4822WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 6 Вт; #: 2; U вх: 18.... в линейках 10 шт
    TEN 5-4823WI (TRACO)
     
    		в линейках 10 шт