Серия DC-DC модульных преобразователей TEN6N

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Рабочая температура
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию TEN6N

DC/DC Converters TEN 6N Series, 6 Watt CB Scheme Features ◆ 2:1 input voltage range ◆ High efficiency ◆ Operating temperature range IEC 60950-1 UL 60950-1 IEC 62368-1 UL 62368-1 –40°C to +85°C ◆ ◆ ◆ ◆ ◆ ◆ ◆ No minimum load required Input filter meets EN 55032, class A Overload protection I/O-isolation 1’500 VDC DIP-24 plastic package The TEN-6N series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55032 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Industry standard pinout 3-year product warranty Models Order code Input voltage range Output voltage Output current max. Efficiency typ. 3.3 VDC 1200 mA 75 % TEN 6-1211N 5 VDC 1200 mA 78 % TEN 6-1212N 12 VDC 500 mA 82 % 400 mA 82 % TEN 6-1210N TEN 6-1213N 9 – 18 VDC 15 VDC TEN 6-1215N (12 VDC nominal) 24 VDC 250 mA 84 % TEN 6-1221N ±5 VDC ±500 mA 78 % TEN 6-1222N ±12 VDC ±250 mA 82 % TEN 6-1223N ±15 VDC ±200 mA 82 % TEN 6-2410N 3.3 VDC 1200 mA 77 % TEN 6-2411N 5 VDC 1200 mA 80 % TEN 6-2412N 12 VDC 500 mA 84 % TEN 6-2413N 18 – 36 VDC 15 VDC 400 mA 84 % TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421N ±5 VDC ±500 mA 80 % TEN 6-2422N ±12 VDC ±250 mA 84 % TEN 6-2423N ±15 VDC ±200 mA 84 % TEN 6-4810N 3.3 VDC 1200 mA 77 % TEN 6-4811N 5 VDC 1200 mA 80 % TEN 6-4812N 12 VDC 500 mA 84 % TEN 6-4813N 36 – 75 VDC 15 VDC 400 mA 84 % TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821N ±5 VDC ±500 mA 80 % TEN 6-4822N ±12 VDC ±250 mA 84 % TEN 6-4823N ±15 VDC ±200 mA 84 % http://www.tracopower.com Page 1 of 3

PDF

Документация на TEN 6-1210N

datasheet

Дата модификации: 03.02.2021

Размер: 212.6 Кб

3 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEN 6N Series, 6 Watt ing C ndB e Scheme p Features ◆ 2:1 input voltage range ◆ High efficiency ◆ Operating temperature range IEC 60950-1 UL 60950-1 -40°C to +85°C ◆ ◆ ◆ ◆ ◆ ◆ ◆ No minimum load required Input filter meets EN 55022, class A Overload protection I/O-isolation 1’500 VDC DIP-24 plastic package The TEN-6N series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Industry standard pinout 3-year product warranty Models Order code Input voltage range Output voltage Output current max. Efficiency typ. 3.3 VDC 1200 mA 75 % TEN 6-1211N 5 VDC 1200 mA 78 % TEN 6-1212N 12 VDC 500 mA 82 % 400 mA 82 % TEN 6-1210N TEN 6-1213N 9 – 18 VDC 15 VDC TEN 6-1215N (12 VDC nominal) 24 VDC 250 mA 84 % TEN 6-1221N ±5 VDC ±500 mA 78 % TEN 6-1222N ±12 VDC ±250 mA 82 % TEN 6-1223N ±15 VDC ±200 mA 82 % TEN 6-2410N 3.3 VDC 1200 mA 77 % TEN 6-2411N 5 VDC 1200 mA 80 % TEN 6-2412N 12 VDC 500 mA 84 % TEN 6-2413N 18 – 36 VDC 15 VDC 400 mA 84 % TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421N ±5 VDC ±500 mA 80 % TEN 6-2422N ±12 VDC ±250 mA 84 % TEN 6-2423N ±15 VDC ±200 mA 84 % TEN 6-4810N 3.3 VDC 1200 mA 77 % TEN 6-4811N 5 VDC 1200 mA 80 % TEN 6-4812N 12 VDC 500 mA 84 % TEN 6-4813N 36 – 75 VDC 15 VDC 400 mA 84 % TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821N ±5 VDC ±500 mA 80 % TEN 6-4822N ±12 VDC ±250 mA 84 % TEN 6-4823N ±15 VDC ±200 mA 84 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TEN6N

Дата модификации: 27.09.2013

Размер: 244.5 Кб

3 стр.

DC/DC Converters TEN 6N Series, 6 Watt C Bending p Scheme IEC 60950-1 Features ◆ 2:1 input voltage range ◆ High efficiency ◆ Operating temperature range UL 60950-1 -40°C to +85°C ◆ ◆ ◆ ◆ ◆ ◆ ◆ No minimum load required Input filter meets EN 55022, class A Overload protection I/O-isolation 1’500 VDC DIP-24 plastic package The TEN-6N series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Industry standard pinout 3-year product warranty Models Order code Input voltage range Output voltage Output current max. Efficiency typ. 3.3 VDC 1200 mA 75 % TEN 6-1211N 5 VDC 1200 mA 78 % TEN 6-1212N 12 VDC 500 mA 82 % 400 mA 82 % TEN 6-1210N TEN 6-1213N 9 – 18 VDC 15 VDC TEN 6-1215N (12 VDC nominal) 24 VDC 250 mA 84 % TEN 6-1221N ±5 VDC ±500 mA 78 % TEN 6-1222N ±12 VDC ±250 mA 82 % TEN 6-1223N ±15 VDC ±200 mA 82 % TEN 6-2410N 3.3 VDC 1200 mA 77 % TEN 6-2411N 5 VDC 1200 mA 80 % TEN 6-2412N 12 VDC 500 mA 84 % TEN 6-2413N 18 – 36 VDC 15 VDC 400 mA 84 % TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421N ±5 VDC ±500 mA 80 % TEN 6-2422N ±12 VDC ±250 mA 84 % TEN 6-2423N ±15 VDC ±200 mA 84 % TEN 6-4810N 3.3 VDC 1200 mA 77 % TEN 6-4811N 5 VDC 1200 mA 80 % TEN 6-4812N 12 VDC 500 mA 84 % TEN 6-4813N 36 – 75 VDC 15 VDC 400 mA 84 % TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821N ±5 VDC ±500 mA 80 % TEN 6-4822N ±12 VDC ±250 mA 84 % TEN 6-4823N ±15 VDC ±200 mA 84 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TEN6N

Дата модификации: 26.03.2013

Размер: 246 Кб

3 стр.

найти TEN6N.pdf

Товары серии TEN6N

Наименование	Упаковка	Возможности	Защита	U вх ном.	КПД	Размер	U2	I2
TEN 6-1210N (TRACO)	в линейках 10 шт					31.8×20.3×10.2 мм	—	—
TEN 6-1211N (TRACO)	1 шт	—	короткого замыкания, перегрузки	—		31.8×20.3×10.2 мм	—	—
TEN 6-1212N (TRACO)	5 шт	—	короткого замыкания, перегрузки			31.8×20.3×10.2 мм	—	—
TEN 6-1213N (TRACO)		—	короткого замыкания, перегрузки			31.8×20.3×10.2 мм	—	—
TEN 6-1215N (TRACO)	1 шт					31.8×20.3×10.2 мм	—	—
TEN 6-1221N (TRACO)			короткого замыкания, перегрузки			31.8×20.3×10.2 мм
TEN 6-1222N (TRACO)	1 шт	—	короткого замыкания, перегрузки			31.8×20.3×10.2 мм
TEN 6-1223N (TRACO)	1 шт		короткого замыкания, перегрузки			31.8×20.3×10.2 мм
TEN 6-2410N (TRACO)	в линейках 10 шт					31.8×20.3×10.2 мм	—	—
TEN 6-2411N (TRACO)	в линейках 10 шт					31.8×20.3×10.2 мм	—	—
TEN 6-2412N (TRACO)	в линейках 10 шт					32×20.3×10.2 мм	—	—
TEN 6-2413N (TRACO)	1 шт					32×20.3×10.2 мм	—	—
TEN 6-2415N (TRACO)	в линейках 10 шт					31.8×20.3×10.2 мм	—	—
TEN 6-2421N (TRACO)	1 шт					32×20.3×10.2 мм
TEN 6-2422N (TRACO)	в линейках 10 шт		короткого замыкания, перегрузки			31.8×20.3×10.2 мм
TEN 6-2423N (TRACO)	1 шт					32×20.3×10.2 мм
TEN 6-4810N (TRACO)	в линейках 10 шт					31.8×20.3×10.2 мм	—	—
TEN 6-4811N (TRACO)	1 шт		короткого замыкания, перегрузки			31.8×20.3×10.2 мм	—	—
TEN 6-4812N (TRACO)	3 шт		короткого замыкания, перегрузки			31.8×20.3×10.2 мм	—	—
TEN 6-4813N (TRACO)	1 шт	—	короткого замыкания, перегрузки	—		31.8×20.3×10.2 мм	—	—
TEN 6-4815N (TRACO)	в линейках 10 шт					32×20.3×10.2 мм	—	—
TEN 6-4821N (TRACO)						32×20.3×10.2 мм	—	—
TEN 6-4822N (TRACO)			короткого замыкания, перегрузки			31.8×20.3×10.2 мм
TEN 6-4823N (TRACO)	в линейках 10 шт		короткого замыкания, перегрузки			31.8×20.3×10.2 мм
TEN6-1210N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3.96W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1211N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1212N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1213N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1215N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1221N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 5W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1222N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-1223N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2410N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3.96W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2411N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2412N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2413N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2415N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2421N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 5W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2422N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-2423N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4810N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3.96W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4811N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4812N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4813N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4815N (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4821N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 5W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4822N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—
TEN6-4823N (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid	—		—	31.8×20.3×10.45 мм	—	—