Серия DC-DC модульных преобразователей TEP100WIR

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Комплекс защит
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Рабочая температура
Схема параллельного включения
Сертификаты медицинские

Документация на серию TEP100WIR

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TEP 100WIR Series, 100 Watt Features ◆ Compact metal package ◆ Ultra wide 4:1 input voltage ranges 9–36, 18–75, 43–160 VDC ◆ EN 50155 approval for railway applications ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Very high efficiency up to 93% No minimum load Soft start (Models pictured with optional heatsink) Adjustable output voltage +10/-20% Sense line Remote On/Off input Under voltage lock-out circuit Reverse input voltage protection Over temperature protection Optional heatsink Optional as chassis mount models with screw terminal block and EMI Filter ◆ 3-year product warranty The TEP 100WIR Series is a family of isolated high performance dc-dc converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed industry standard half brick package. A very high efficiency allows full power operation without forced air cooling at 60°C This temperature can be increased to 70°C with optional mounted heatsink or up to 85°C when mounted on an iron base plate. The very wide input voltage range and reverse input voltage protection make these converters interesting solution for battery operated systems. Typical applications are in telecom/datacom, industry control and railway systems for on board power distribution. These series is available in many optional designs on demand --> see options. Standard Models Order code Input voltage TEP 100-2411WIR TEP 100-2412WIR TEP 100-2415WIR TEP 100-2416WIR TEP 100-2418WIR TEP 100-4812WIR TEP 100-4815WIR TEP 100-4816WIR TEP 100-4818WIR TEP 100-7212WIR TEP 100-7215WIR TEP 100-7216WIR TEP 100-7218WIR 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) 43 – 160 VDC (110 VDC nominal) Output voltage 5 VDC 12 VDC 24 VDC 28 VDC 48 VDC 12 VDC 24 VDC 28 VDC 48 VDC 12 VDC 24 VDC 28 VDC 48 VDC Output current max. 20 A 8.4 A 4.2 A 3.6 A 2.1 A 8.4 A 4.2 A 3.6 A 2.1 A 8.4 A 4.2 A 3.6 A 2.1 A Efficiency typ. 93 % 90 % 90 % 90 % 90 % 90 % 90 % 92 % 91 % 90 % 90 % 90 % 91 % Options TEP-HS1 TEP-MK1 TCK-xxx on demand Heat-sink for standard version (incl. mounting screws and thermal pad) Din-rail mounting kit for chassis mount models (incl. mounting screws) Common mode chokes for filter proposals to meet EN55022 class A/B --> see application note Models with 3.3 VDC/~ 25 A or 5.0 VDC/~ 20 A or 15 VDC/~ 6.7 A output Chassis mount models with screw terminal block Chassis mount models with screw terminal block and input filter to meet EN 555022 class A Negative (passive = Off) Remote On/Off function (standard is passive = On) http://www.tracopower.com Page 1 of 5 PDF
Документация на серию TEP100WIR 

TEP 100WIR

Дата модификации: 26.09.2016

Размер: 703.7 Кб

5 стр.

    Товары серии TEP100WIR

    Наименование i Упаковка U вх Выход Возможности U вх ном. U1 I1 Размер
    TEP 100-2410WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-2411WIR (TRACO)
     
    		1 шт 61×57.9×12.7 мм
    TEP 100-2412WIR (TRACO)
     
    		1 шт 61×57.9×12.7 мм
    TEP 100-2413WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-2415WIR (TRACO)
     
    		1 шт 61×57.9×12.7 мм
    TEP 100-2416WIR (TRACO)
     
    		1 шт 61×57.9×12.7 мм
    TEP 100-2418WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4810WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4811WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4812WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4813WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4815WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4816WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-4818WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-7210WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-7211WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-7212WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-7213WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP 100-7216WIR (TRACO)
     
    		1 шт 61×57.9×12.7 мм
    TEP 100-7218WIR (TRACO)
     
    		61×57.9×12.7 мм
    TEP100-2411WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-2412WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-2415WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-2416WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-2418WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-4812WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-4815WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-4816WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-4818WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-7212WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-7215WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-7216WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм
    TEP100-7218WIR (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 100W — 57.9×61×12.7 мм