Серия DC-DC модульных преобразователей TEQ 100WIR

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит КЗ, перегрузка, перенапряжение, от пониженного входного напряжения
КПД
Напряжение изоляции вход-выход
Размер 103.2×88.9×87.6 мм
Рабочая температура

Документация на серию TEQ 100WIR

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TEQ 100WIR Series, 100 Watt • High power block with excellent thermal convection • Operating temperature -40°C to +85°C without derating • • • Increased shock & vibration resistance • • • • • Excellent efficiency up to 90% Ultra wide 4:1 input voltage range EN 50155 approval for railway applications Input filter meet EN 55022, class A I/O isolation 1591 VAC Under voltage lock-out circuit Soft start UL 508 UL 62368-1 IEC 62368-1 The TEQ 100WIR Series is a family of isolated high performance DC/DC converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis. A very high efficiency and the overall heatsink construction allows an operating temperature up to +85°C with natural convection cooling without power derating and up to +95°C with power derating. Further features include output voltage trimming, Remote On/Off and under voltage lockout. The ultra wide input voltage range and reverse input voltage protection make these converters also an interesting solution for battery operated systems. Models Order Code Input Voltage Range TEQ 100-2412WIR TEQ 100-2415WIR 10 - 36 VDC (24 VDC nom.) Output Voltage nom. Output Current max. Efficiency typ. 12 VDC 8'400 mA 90 % 24 VDC 4'200 mA 90 % 28 VDC 3'600 mA 90 % TEQ 100-2418WIR 48 VDC 2'100 mA 90 % TEQ 100-4812WIR 12 VDC 8'400 mA 90 % 24 VDC 4'200 mA 90 % 28 VDC 3'600 mA 90 % TEQ 100-4818WIR 48 VDC 2'100 mA 90 % TEQ 100-7212WIR 12 VDC 8'400 mA 89 % TEQ 100-7215WIR 24 VDC 4'200 mA 90 % 28 VDC 3'600 mA 90 % 48 VDC 2'100 mA 90 % TEQ 100-2416WIR TEQ 100-4815WIR TEQ 100-4816WIR TEQ 100-7216WIR TEQ 100-7218WIR 19 - 75 VDC (48 VDC nom.) 43 - 160 VDC (110 VDC nom.) Options TEQ-MK1 - Optional DIN-Rail Mounting Kit: www.tracopower.com/products/teq-mk1.pdf www.tracopower.com October 26, 2020 Page 1 / 4 PDF
Документация на серию TEQ 100WIR 

TEQ 100WIR Datasheet 100 Watt DC/DC module, railway, 4:1 input, Chassis mount, Rugged design, increased shock and vibration resistance, with EMI Filter, encapsulated, high power block

Дата модификации: 26.10.2020

Размер: 1.01 Мб

4 стр.

    Товары серии TEQ 100WIR

    Наименование i Упаковка U вх Выход U1 I1
    TEQ 100-2412WIR (TRACO)
     
    TEQ 100-2415WIR (TRACO)
     
    		1 шт
    TEQ 100-2416WIR (TRACO)
     
    TEQ 100-2418WIR (TRACO)
     
    TEQ 100-4812WIR (TRACO)
     
    TEQ 100-4815WIR (TRACO)
     
    TEQ 100-4816WIR (TRACO)
     
    TEQ 100-4818WIR (TRACO)
     
    		1 шт
    TEQ 100-7212WIR (TRACO)
     
    TEQ 100-7215WIR (TRACO)
     
    TEQ 100-7216WIR (TRACO)
     
    TEQ 100-7218WIR (TRACO)