Серия DC-DC модульных преобразователей TES1V

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Возможности
Комплекс защит
Напряжение изоляции вход-выход
Рабочая температура

Документация на серию TES1V

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TES 1V Series, 1 Watt Features ◆ Small SMD package with standard footprint ◆ ◆ ◆ ◆ I/O isolation voltage 3000 VDC Single- and dual output models High efficiency up to 80% Operating temperature range –40°C to +85°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape and reel package ◆ 3-year product warranty The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Output voltage Output current max. Efficiency typ. TES 1-0510V Order code 3.3 VDC 260 mA 72 % TES 1-0511V 5.0 VDC 200 mA 75 % 12 VDC 84 mA 79 % 15 VDC 67 mA 80 % TES 1-0512V TES 1-0513V TES 1-0521V Input voltage 5 VDC ±10% (nominal 5 VDC) ±5 VDC ±100 mA 75 % TES 1-0522V ±12 VDC ±42 mA 79 % TES 1-0523V ±15 VDC ±34 mA 80 % TES 1-1210V 3.3 VDC 260 mA 73 % TES 1-1211V 5.0 VDC 200 mA 76 % TES 1-1212V 12 VDC 84 mA 80 % 15 VDC 67 mA 81 % ±5 VDC ±100 mA 76 % TES 1-1222V ±12 VDC ±42 mA 80 % TES 1-1223V ±15 VDC ±34 mA 80 % TES 1-2410V 3.3 VDC 260 mA 70 % TES 1-2411V 5.0 VDC 200 mA 73 % 12 VDC 84 mA 79 % 15 VDC 67 mA 79 % TES 1-1213V TES 1-1221V TES 1-2412V TES 1-2413V TES 1-2421V 12 VDC ±10% (nominal 12 VDC) 24 VDC ±10% (nominal 24 VDC) ±5 VDC ±100 mA 73 % TES 1-2422V ±12 VDC ±42 mA 79 % TES 1-2423V ±15 VDC ±34 mA 79 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TES1V 

Дата модификации: 23.07.2012

Размер: 275.9 Кб

3 стр.

    Товары серии TES1V

    Наименование i Упаковка Каналов U вх Выход U вх ном. U1 I1 Шум КПД Размер U2 I2
    TES 1-0510V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 4.5..... в линейках 10 шт 16.3×11×8 мм
    TES 1-0511V (TRACO) в линейках 10 шт 16.3×8×8 мм
    TES 1-0512V (TRACO) в линейках 10 шт 16.3×8×8 мм
    TES 1-0513V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 4.5..... в линейках 10 шт 16.3×11×8 мм
    TES 1-0521V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 2; U вх: 4.5..... в линейках 10 шт 16.3×11×8 мм
    TES 1-0522V (TRACO) 16.3×11×8 мм
    TES 1-0523V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 2; U вх: 4.5..... в линейках 10 шт 16.3×11×8 мм
    TES 1-1210V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 10.8.... в линейках 10 шт 16.3×11×8 мм
    TES 1-1211V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 10.8.... в линейках 10 шт 16.3×11×8 мм
    TES 1-1212V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 10.8.... 1 шт 16.3×11×8 мм
    TES 1-1213V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 10.8.... 1 шт 16.3×11×8 мм
    TES 1-1221V (TRACO) 16.3×11×8 мм
    TES 1-1222V (TRACO) в линейках 10 шт 16.3×11×8 мм
    TES 1-1223V (TRACO) 16.3×11×8 мм
    TES 1-2410V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 21.6.... 10 шт 16.3×11×8 мм
    TES 1-2411V (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 1 Вт; #: 1; U вх: 21.6.... в линейках 10 шт 16.3×11×8 мм
    TES 1-2412V (TRACO) 16.3×11×8 мм
    TES 1-2413V (TRACO) 20 шт 16.3×11×8 мм
    TES 1-2421V (TRACO) 16.3×11×8 мм
    TES 1-2422V (TRACO) 16.3×11×8 мм
    TES 1-2423V (TRACO) в линейках 10 шт 16.3×11×8 мм