Серия DC-DC модульных преобразователей TES2M

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Рабочая температура
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию TES2M

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TES 2M Series, 2 Watt CB Scheme Features ◆ Ultracompact SMD-package ◆ I/O isolation 4000 VACrms rated for ing IECnd e 60950-1 pIEC 60601-1 working voltages up to 300 Vrms ◆ Operating temp. range –25°C to +80°C ◆ Qualified for leadfree reflow solder process ◆ Available in tape & reel package The TES 2M series is range of compact 2W DC/DC-converters providing a high I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required. These converters are qualified for high solder temperature profiles in leadfree solder processes. For automated SMD production lines the devices can be supplied in tape & reel package. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 2-0511M 5 VDC 400 mA 66 % TES 2-0512M 12 VDC 165 mA 66 % TES 2-0513M TES 2-0522M 5.0 VDC ±10% (nominal 05 VDC) 15 VDC 133 mA 66 % ±12 VDC ±83 mA 72 % TES 2-0523M ±15 VDC ±66 mA 73 % TES 2-1211M 5 VDC 400 mA 66 % TES 2-1212M TES 2-1213M TES 2-1222M 12.0 VDC ±10% (nominal 12 VDC) 12 VDC 165 mA 66 % 15 VDC 133 mA 66 % ±12 VDC ±83 mA 74 % TES 2-1223M ±15 VDC ±66 mA 75 % TES 2-2411M 5 VDC 400 mA 66 % TES 2-2412M TES 2-2413M TES 2-2422M TES 2-2423M http://www.tracopower.com 24 VDC ±10% (nominal 24 VDC) 12 VDC 165 mA 66 % 15 VDC 133 mA 66 % ±12 VDC ±83 mA 74 % ±15 VDC ±66 mA 75 % Page 1 of 3

PDF

Документация на серию TES2M

datasheet

Дата модификации: 08.05.2013

Размер: 163.2 Кб

3 стр.

DC/DC Converters TES 2M Series, 2 Watt Features ◆ Ultracompact SMD-package ◆ I/O isolation 4000 VACrms rated for working voltages up to 300 Vrms ◆ Operating temp. range –40°C to +71°C ◆ Qualified for leadfree reflow solder process ◆ Available in tape & reel package The TES 2M series is range of compact 2W DC/DC-converters providing a high I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required. These converters are qualified for high solder temperature profiles in leadfree solder processes. For automated SMD production lines the devices can be supplied in tape & reel package. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 2-0511M 5 VDC 400 mA 66 % TES 2-0512M 12 VDC 165 mA 66 % TES 2-0513M 5.0 VDC ±10% (nominal 05 VDC) 15 VDC 133 mA 66 % ±12 VDC ±83 mA 72 % TES 2-0523M ±15 VDC ±66 mA 73 % TES 2-1211M 5 VDC 400 mA 66 % 12 VDC 165 mA 66 % 15 VDC 133 mA 66 % TES 2-0522M TES 2-1212M TES 2-1213M TES 2-1222M 12.0 VDC ±10% (nominal 12 VDC) ±12 VDC ±83 mA 74 % TES 2-1223M ±15 VDC ±66 mA 75 % TES 2-2411M 5 VDC 400 mA 66 % 12 VDC 165 mA 66 % 15 VDC 133 mA 66 % ±12 VDC ±83 mA 74 % ±15 VDC ±66 mA 75 % TES 2-2412M TES 2-2413M TES 2-2422M TES 2-2423M http://www.tracopower.com 24 VDC ±10% (nominal 24 VDC) Page 1 of 3

PDF

Документация на серию TES2M

tes2n

Дата модификации: 02.11.2012

Размер: 176.6 Кб

3 стр.

найти TES2M.pdf

Товары серии TES2M

Наименование	Упаковка	Возможности	КПД	Размер	U2	I2
TES 2-0511M (TRACO)	в линейках 10 шт			24×13.7×9 мм	—	—
TES 2-0512M (TRACO)				24×13.7×9 мм	—	—
TES 2-0513M (TRACO)				24×13.7×9 мм	—	—
TES 2-0522M (TRACO)				24×13.7×9 мм
TES 2-0523M (TRACO)				24×13.7×9 мм
TES 2-1211M (TRACO)				24×13.7×9 мм	—	—
TES 2-1212M (TRACO)				24×13.7×9 мм	—	—
TES 2-1213M (TRACO)				24×13.7×9 мм	—	—
TES 2-1222M (TRACO)				24×13.7×9 мм
TES 2-1223M (TRACO)				24×13.7×9 мм
TES 2-2411M (TRACO)	в линейках 10 шт			24×13.7×9 мм	—	—
TES 2-2412M (TRACO)				24×13.7×9 мм	—	—
TES 2-2413M (TRACO)				24×13.7×9 мм	—	—
TES 2-2422M (TRACO)				24×13.7×9 мм
TES 2-2423M (TRACO)				24×13.7×9 мм
TES2-0511M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-0512M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-0513M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-0522M (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-0523M (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-1211M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-1212M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-1213M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-1222M (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-1223M (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-2411M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-2412M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-2413M (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-2422M (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—
TES2-2423M (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 2W, Hybrid	—	24×13.7×9.45 мм	—	—