Серия DC-DC модульных преобразователей TES3WI

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Комплекс защит
	Уровень пульсаций
	Схема параллельного включения
	Напряжение изоляции вход-выход
	Сертификаты медицинские
	Рабочая температура

Документация на серию TES3WI

DC/DC Converter • • • • • TES 3WI Series, 3 Watt Ultra-wide 4:1 input voltage range I/O isolation 1500 VDC Operating temp. range –40°C to +70°C Short circuit protection Input filter to meet EN 55032, conducted class A • • • Remote On/Off • • Available in tape & reel package High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E The TES 3WI series is a family of high performance 3W DC/DC-converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultrawide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of –40°C to +70°C at full load. Further features are built-in EMI-filter to meet EN 55032 conducted class A without external components and remote On/Off control. The products comply with IPC J-STD-020E and are qualified for high temperature lead-free reflow solder process. 3-year product warranty Models Order Code Input Voltage Range TES 3-2410WI TES 3-2411WI TES 3-2412WI TES 3-2413WI TES 3-2421WI TES 3-2422WI TES 3-2423WI TES 3-4810WI TES 3-4811WI TES 3-4812WI TES 3-4813WI TES 3-4821WI TES 3-4822WI TES 3-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 750 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA February 3, 2022 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 300 mA 125 mA 100 mA –5 VDC –12 VDC –15 VDC 300 mA 125 mA 100 mA typ. 75 % 79 % 81 % 81 % 78 % 81 % 81 % 76 % 80 % 83 % 83 % 80 % 83 % 83 % Page 1 / 4

PDF

Документация на TES 3-2411WI

TES 3WI Datasheet 3 Watt DC/DC converter, industrial, 4:1 input, plastic case, SMD (DIP-24)

Дата модификации: 03.02.2022

Размер: 774.1 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TES 3WI Series, 3 Watt Features ◆ Compact SMD package ◆ 33.4 x 18.8 mm footprint ◆ Ultra-wide 4:1 input voltage range ◆ I/O isolation 1500 VDC ◆ Operating temp. range –40°C to +71°C ◆ Short circuit protection ◆ Input filter to meet EN 55022, class A ◆ Remote On/Off ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder UL 60950-1 pending process according IPC/JEDEC J-STD-020D ◆ Available in tape & reel package ◆ 3-year product warranty The TES-3WI series is a family of high performance 3W dc/dc-converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultrawide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of –40°C to +71°C at full load. Further features are built-in EMI-filter to meet EN 55022 class A without external components and remote On/Off control. The products comply with IPC J-STD-020D and are qualified for high temperature lead-free reflow solder process. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TES 3-2410WI 3.3 VDC 750 mA 75 % TES 3-2411WI 5 VDC 600 mA 79 % 12 VDC 250 mA 81 % 15 VDC 200 mA 81 % ±5 VDC ±300 mA 78 % TES 3-2422WI ±12 VDC ±125 mA 81 % TES 3-2412WI TES 3-2413WI TES 3-2421WI 9 – 36 VDC (nominal 24 VDC) TES 3-2423WI ±15 VDC ±100 mA 81 % TES 3-4810WI 3.3 VDC 750 mA 76 % TES 3-4811WI 5 VDC 600 mA 80 % 12 VDC 250 mA 83 % 15 VDC 200 mA 83 % ±5 VDC ±300 mA 80 % TES 3-4822WI ±12 VDC ±125 mA 83 % TES 3-4823WI ±15 VDC ±100 mA 83 % TES 3-4812WI TES 3-4813WI TES 3-4821WI http://www.tracopower.com 18 – 75 VDC (nominal 48 VDC) Page 1 of 3

PDF

Документация на серию TES3WI

Дата модификации: 18.02.2011

Размер: 261.3 Кб

3 стр.

найти TES3WI.pdf

Документация на серию TES3WI

Товары серии TES3WI

Наименование	Упаковка	Возможности	КПД	Размер	U2	I2
TES 3-2410WI (TRACO)	в линейках 10 шт			32.3×18.8×10.2 мм	—	—
TES 3-2411WI (TRACO)	в линейках 10 шт			32.3×18.8×10.2 мм	—	—
TES 3-2412WI (TRACO)				32.3×18.8×10.2 мм	—	—
TES 3-2413WI (TRACO)				32.3×18.8×10.2 мм	—	—
TES 3-2421WI (TRACO)				32.3×18.8×10.2 мм
TES 3-2422WI (TRACO)	1 шт			32.3×18.8×10.2 мм
TES 3-2423WI (TRACO)	в линейках 10 шт			32.3×18.8×10.2 мм
TES 3-4810WI (TRACO)	в линейках 10 шт			32.3×18.8×10.2 мм	—	—
TES 3-4811WI (TRACO)				32.3×18.8×10.2 мм	—	—
TES 3-4812WI (TRACO)				32.3×18.8×10.2 мм	—	—
TES 3-4813WI (TRACO)	1 шт			32.3×18.8×10.2 мм	—	—
TES 3-4821WI (TRACO)	10 шт			32.3×18.8×10.2 мм
TES 3-4822WI (TRACO)				32.3×18.8×10.2 мм
TES 3-4823WI (TRACO)	10 шт			32.3×18.8×10.2 мм
TES3-2411WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-2412WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-2421WI (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-2422WI (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-2423WI (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4810WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 2.475W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4811WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4812WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4813WI (TRACO)		DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4821WI (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4822WI (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—
TES3-4823WI (TRACO)		DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid	—	32.3×14.8×10.45 мм	—	—