Серия DC-DC модульных преобразователей THB3

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Комплекс защит
Напряжение изоляции вход-выход
Напряжение 2 выхода
Ток 2 выхода
Схема параллельного включения
Сертификаты медицинские

Документация на серию THB3

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THB 3 Series, 3 Watt CB Scheme Features ◆ Supplementary and reinforced insulation ◆ I/O isolation 3000 VACrms rated for IEC 60950-1 UL 60950-1 UL 60950-1 IEC 60601-1 UL 60601-1 300 Vrms working voltage ◆ Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP ◆ ◆ ◆ ◆ Industrial safety to IEC/EN/UL 60950-1 ◆ ◆ ◆ ◆ Input filter meets EN55022, class A Isolation test voltage 6000 Vpk Wide 2:1 input voltage ranges Extended operating temperature range –40°C to 71°C max. Continuous short-circuit protection High reliability 3-year product warranty The THB-3 series is a range of high performance, regulated DC/DC converters in a DIP-24 plastic package. A reinforced I/O-isolation system and a wide 2:1 input voltage range make this product the best choice for many demanding applications like transportation systems, industrial controls, medical equipments, instrumentations, everywhere where high basic-, supplementary- or reinforced insulation is required to meet requested safety standards. A high efficiency allows safe operation in a temperature range of –40°C to +71°C. Other features of this product are over voltage protection and internal EMI-input filter to meet EN 55022, class A without additional components. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order code Input voltage range THB 3-0511 THB 3-0512 THB 3-0515 THB 3-0522 4.5 – 9 VDC (5 VDC nominal) Output voltage Output current max. Efficiency typ. 5 VDC 600 mA 70 % 12 VDC 250 mA 75 % 24 VDC 125 mA 76 % ±12 VDC ±125 mA 75 % THB 3-0523 ±15 VDC ±100 mA 75 % THB 3-1211 5 VDC 600 mA 74 % 12 VDC 250 mA 80 % 24 VDC 125 mA 81 % THB 3-1212 THB 3-1215 THB 3-1222 9 – 18 VDC (12 VDC nominal) ±12 VDC ±125 mA 80 % THB 3-1223 ±15 VDC ±100 mA 80 % THB 3-2411 5 VDC 600 mA 78 % 12 VDC 250 mA 83 % 24 VDC 125 mA 84 % THB 3-2412 THB 3-2415 THB 3-2422 18 – 36 VDC (24 VDC nominal) ±12 VDC ±125 mA 83 % THB 3-2423 ±15 VDC ±100 mA 83 % THB 3-4811 5 VDC 600 mA 78 % 12 VDC 250 mA 83 % 24 VDC 125 mA 84 % ±12 VDC ±125 mA 83 % ±15 VDC ±100 mA 83 % THB 3-4812 THB 3-4815 THB 3-4822 THB 3-4823 http://www.tracopower.com 36 – 75 VDC (48 VDC nominal) Page 1 of 3 PDF
Документация на серию THB3 

THB 3

Дата модификации: 15.02.2013

Размер: 155.7 Кб

3 стр.

DC/DC Converters THB 3 Series, 3 Watt CB Scheme Features ◆ Supplementary and reinforced insulation UL 60950-1 UL 60601-1 for working voltages up to 300 VAC ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ I/O isolation 4000 VACrms Isolation test voltage 6000 Vpk Wide 2:1 input voltage ranges Extended operating temperature range –40°C to 85°C max. Input filter meets EN55022, class A Continuous short-circuit protection High reliability Industrial & medical safety approvals 3-year product warranty The THB-3 series is a range of high performance, regulated DC/DC converters in a DIP-24 plastic package. A reinforced I/O-isolation system and a wide 2:1 input voltage range make this product the best choice for many demanding applications like transportation systems, industrial controls, medical equipments, instrumentations, everywhere where high basic-, supplementary- or reinforced insulation is required to meet requested safety standards. A high efficiency allows safe operation in a temperature range of –40°C to +85°C. Other features of this product are over voltage protection and internal EMI-input filter to meet EN 55022, class A without additional components. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order code Input voltage range THB 3-0511 THB 3-0512 THB 3-0515 THB 3-0522 4.5 – 9 VDC (5 VDC nominal) Output voltage Output current max. Efficiency typ. 5 VDC 600 mA 70 % 12 VDC 250 mA 75 % 24 VDC 125 mA 76 % ±12 VDC ±125 mA 75 % THB 3-0523 ±15 VDC ±100 mA 75 % THB 3-1211 5 VDC 600 mA 74 % 12 VDC 250 mA 80 % 24 VDC 125 mA 81 % THB 3-1212 THB 3-1215 THB 3-1222 9 – 18 VDC (12 VDC nominal) ±12 VDC ±125 mA 80 % THB 3-1223 ±15 VDC ±100 mA 80 % THB 3-2411 5 VDC 600 mA 78 % 12 VDC 250 mA 83 % 24 VDC 125 mA 84 % THB 3-2412 THB 3-2415 THB 3-2422 18 – 36 VDC (24 VDC nominal) ±12 VDC ±125 mA 83 % THB 3-2423 ±15 VDC ±100 mA 83 % THB 3-4811 5 VDC 600 mA 78 % 12 VDC 250 mA 83 % 24 VDC 125 mA 84 % ±12 VDC ±125 mA 83 % ±15 VDC ±100 mA 83 % THB 3-4812 THB 3-4815 THB 3-4822 THB 3-4823 http://www.tracopower.com 36 – 75 VDC (48 VDC nominal) Page 1 of 3 PDF
Документация на серию THB3 

THB 3

Дата модификации: 03.04.2009

Размер: 171.9 Кб

3 стр.

    Товары серии THB3

    Наименование i Упаковка Каналов U вх Выход Возможности U вх ном. U1 I1 Шум КПД Размер T раб
    THB 3-0511 (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 1; U вх: 18.... 1 шт 31.8×20.3×10.5 мм
    THB 3-0522 (TRACO)
     
    		в линейках 10 шт 31.8×20.3×10.5 мм
    THB 3-1212 (TRACO)
     
    		1 шт 31.8×20.3×10.5 мм
    THB 3-1215 (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 1; U вх: 9..... в линейках 10 шт 31.8×20.3×10.5 мм
    THB 3-1222 (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 2; U вх: 9..... 1 шт 31.8×20.3×10.5 мм
    THB 3-2411 (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 1; U вх: 18.... в линейках 10 шт 31.8×20.3×10.5 мм
    THB 3-2412 (TRACO)
     
    		31.8×20.3×10.5 мм
    THB 3-2415 (TRACO)
     
    		в линейках 10 шт 31.8×20.3×10.5 мм
    THB 3-4811 (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 3 Вт; #: 1; U вх: 36.... в линейках 10 шт 31.8×20.3×10.5 мм
    THB3-0511 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-0512 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-0515 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-0522 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-0523 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-1211 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-1212 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-1215 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-1222 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-1223 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-2411 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-2412 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-2415 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-2422 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-2423 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-4811 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-4812 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-4815 (TRACO)
     
    		— — — 31.8×7.62×10.75 мм
    THB3-4822 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм
    THB3-4823 (TRACO)
     
    		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED — — — 31.8×7.62×10.75 мм