Серия DC-DC модульных преобразователей THB6

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Рабочая температура
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию THB6

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THB 6 Series, 6 Watt CB Features ◆ I/O isolation 3000 VACrms rated for Scheme IEC 60950-1 UL 60950-1 UL 60950-1 IEC 60601-1 UL 60601-1 300 Vrms working voltage ◆ Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP ◆ ◆ ◆ ◆ Industrial safety to IEC/EN/UL 60950-1 Ultra compact DIP-24 package Wide 2:1 input voltage ranges Operating temperature range –40°C to +71°C ◆ Low leakage current ◆ Short circuit protection ◆ Input filter to meet EN 55022, Class A ◆ 3-year product warranty The THB 6 series is a new range of high performance, regulated DC/DC converters in a DIP-24 plastic package. A reinforced I/O-isolation system and a wide 2:1 input voltage range make this product the best choice for many demanding applications like transportation systems, industrial controls, medical equipment, instrumentation, everywhere where high basic-, supplementary- or reinforced insulation is required to meet requested safety standards. A high efficiency allows safe operation in a temperature range of –40°C to +71°C. Other features of this product are over voltage protection and internal EMI-input filter to meet EN 55022 class A without additional components. Full SMD-design with exclusive use of ceramic capacitors ensures a very high reliability and a long product lifetime. Models Order code Input voltage range THB 6-1211 THB 6-1212 THB 6-1222 5 VDC 9 - 18 VDC (12 VDC nominal) THB 6-1223 THB 6-2411 THB 6-2412 THB 6-2422 Output voltage 18 - 36 VDC (24 VDC nominal) Output current max. Efficiency typ. 1000 mA 75 % 12 VDC 500 mA 78 % ±12 VDC ±250 mA 78 % ±15 VDC ±200 mA 78 % 5 VDC 1000 mA 77 % 12 VDC 500 mA 80 % ±12 VDC ±250 mA 80 % THB 6-2423 ±15 VDC ±200 mA 80 % THB 6-4811 5 VDC 1000 mA 77 % THB 6-4812 THB 6-4822 THB 6-4823 http://www.tracopower.com 36 - 75 VDC (48 VDC nominal) 12 VDC 500 mA 80 % ±12 VDC ±250 mA 80 % ±15 VDC ±200 mA 80 % Page 1 of 3

PDF

Документация на серию THB6

Datasheet

Дата модификации: 08.05.2013

Размер: 177.9 Кб

3 стр.

DC/DC Converters THB 6 Series, 6 Watt CB Scheme Features ◆ I/O isolation 3000 VACrms rated for IEC 60950-1 UL 60950-1 UL 60950-1 IEC 60601-1 UL 60601-1 UL 60601-1 300 Vrms working voltage ◆ Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP ◆ ◆ ◆ ◆ Industrial safety to IEC/EN/UL 60950-1 Ultra compact DIP-24 package Wide 2:1 input voltage ranges Operating temperature range –40°C to +71°C ◆ Low leakage current ◆ Short circuit protection ◆ Input filter to meet EN 55022, Class A ◆ 3-year product warranty The THB 6 series is a new range of high performance, regulated DC/DC converters in a DIP-24 plastic package. A reinforced I/O-isolation system and a wide 2:1 input voltage range make this product the best choice for many demanding applications like transportation systems, industrial controls, medical equipment, instrumentation, everywhere where high basic-, supplementary- or reinforced insulation is required to meet requested safety standards. A high efficiency allows safe operation in a temperature range of –40°C to +71°C. Other features of this product are over voltage protection and internal EMI-input filter to meet EN 55022 class A without additional components. Full SMD-design with exclusive use of ceramic capacitors ensures a very high reliability and a long product lifetime. Models Order code Input voltage range THB 6-1211 THB 6-1212 THB 6-1222 5 VDC 9 - 18 VDC (12 VDC nominal) THB 6-1223 THB 6-2411 THB 6-2412 THB 6-2422 Output voltage 18 - 36 VDC (24 VDC nominal) Output current max. Efficiency typ. 1000 mA 75 % 12 VDC 500 mA 78 % ±12 VDC ±250 mA 78 % ±15 VDC ±200 mA 78 % 5 VDC 1000 mA 77 % 12 VDC 500 mA 80 % ±12 VDC ±250 mA 80 % THB 6-2423 ±15 VDC ±200 mA 80 % THB 6-4811 5 VDC 1000 mA 77 % THB 6-4812 THB 6-4822 THB 6-4823 http://www.tracopower.com 36 - 75 VDC (48 VDC nominal) 12 VDC 500 mA 80 % ±12 VDC ±250 mA 80 % ±15 VDC ±200 mA 80 % Page 1 of 3

PDF

Документация на серию THB6

THB 3

Дата модификации: 11.12.2012

Размер: 240.7 Кб

3 стр.

найти THB6.pdf

Товары серии THB6

Наименование	Упаковка	Возможности	I1	КПД	Размер	U2	I2
THB 6-1211 (TRACO)	4 шт				31.8×20.3×12 мм	—	—
THB 6-1212 (TRACO)	в линейках 10 шт				31.8×20.3×12 мм	—	—
THB 6-1222 (TRACO)					31.8×20.3×12 мм
THB 6-1223 (TRACO)					31.8×20.3×12 мм
THB 6-2411 (TRACO)					31.8×20.3×12 мм	—	—
THB 6-2412 (TRACO)	в линейках 10 шт				31.8×20.3×12 мм	—	—
THB 6-2422 (TRACO)	2 шт				31.8×20.3×12 мм
THB 6-2423 (TRACO)					31.8×20.3×12 мм
THB 6-4811 (TRACO)	в линейках 10 шт				31.8×20.3×12 мм	—	—
THB 6-4812 (TRACO)					31.8×20.3×12 мм	—	—
THB 6-4822 (TRACO)					31.8×20.3×12 мм
THB 6-4823 (TRACO)					31.8×20.3×12 мм
THB6-1211 (TRACO)				—	31.8×20.3×12.25 мм	—	—
THB6-1212 (TRACO)				—	31.8×20.3×12.25 мм	—	—
THB6-1222 (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED	—	—	31.8×20.3×12.25 мм	—	—
THB6-1223 (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED	—	—	31.8×20.3×12.25 мм	—	—
THB6-2411 (TRACO)			—	—	31.8×20.3×12.25 мм	—	—
THB6-2412 (TRACO)			—	—	31.8×20.3×12.25 мм	—	—
THB6-2422 (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED	—	—	31.8×20.3×12.25 мм	—	—
THB6-2423 (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED	—	—	31.8×20.3×12.25 мм	—	—
THB6-4811 (TRACO)			—	—	31.8×20.3×12.25 мм	—	—
THB6-4812 (TRACO)			—	—	31.8×20.3×12.25 мм	—	—
THB6-4822 (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED	—	—	31.8×20.3×12.25 мм	—	—
THB6-4823 (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED	—	—	31.8×20.3×12.25 мм	—	—