Серия DC-DC модульных преобразователей THD12WI

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Возможности
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Размер	31.8×20.3×10.2 мм
	Рабочая температура

Документация на серию THD12WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THD 12WI Series, 12 Watt Features ◆ Highest power density: 12W in DIP 24 package! ◆ ◆ ◆ ◆ Ultra-wide 4:1 input range Very high efficiency up to 85% I/O isolation 1500V Input filter meets EN 55022A without ext. components ◆ Remote On/Off ◆ Under voltage lock-out circuit ◆ Shielded metal case with insulated baseplate ◆ ◆ ◆ ◆ Continuous short-circuit protection Operating temp. range –40°C to +85°C Lead free design, RoHS compliant 3-year product warranty The THD-12WI series is a range of high performance, isolated 12W dc/dc converter modules featuring ultra wide 4:1 input voltage ranges in a DIP-24 package with industry-standard footprint. Overload and overvoltage protection as well as remote On/Off are included as standard. Built-in filters for both input and output minimizes the need of external filtering. Full SMD-design with exclusive use of ceramic capacitors guarantees a high reliability and long product lifetime. Typical applications for these converters are industrial electronics, instrumentation, data communication systems and battery operated equipment with limited space available on the PCB. Models Order code Output voltage Output current max. Efficiency typ. THD 12-2410WI 3.3 VDC 3‘500 mA 84 % THD 12-2411WI 5.1 VDC 2’400 mA 85 % 12 VDC 1‘000 mA 85 % 15 VDC 800 mA 85 % ±5 VDC ±1‘200 mA 82 % THD 12-2422WI ±12 VDC ±500 mA 85 % THD 12-2423WI ±15 VDC ±400 mA 85 % THD 12-4810WI 3.3 VDC 3‘500 mA 84 % THD 12-4811WI 5.1 VDC 2’400 mA 85 % THD 12-4812WI 12 VDC 1‘000 mA 85 % 15 VDC 800 mA 85 % ±5 VDC ±1‘200 mA 82 % THD 12-4822WI ±12 VDC ±500 mA 85 % THD 12-4823WI ±15 VDC ±400 mA 85 % THD 12-2412WI THD 12-2413WI THD 12-2421WI THD 12-4813WI THD 12-4821WI http://www.tracopower.com Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Page 1 of 3

PDF

Документация на серию THD12WI

THD12

Дата модификации: 20.04.2012

Размер: 124.6 Кб

3 стр.

DC/DC Converters THD 12WI Series, 12 Watt RoHS compliant Features ◆ Highest Power Density: pending 12W in DIP 24 Package! ◆ ◆ ◆ ◆ Ultra-wide 4:1 Input Range Very high Efficiency up to 85% I/O-Isolation 1500V Input Filter meets EN 55022A without ext. Components ◆ Remote On/Off ◆ Shielded Metal Case with insulated Baseplate ◆ ◆ ◆ ◆ Continuous Short-circuit Protection Operating Temp. Range -40°C to +85°C Lead free Design, RoHS compliant 3 Year Product Warranty The THD-12WI series is a range of high performance, isolated 12W dc/dc converter modules featuring ultra wide 4:1 input voltage ranges in a DIP-24 package with industry-standard footprint. Overload and overvoltage protection as well as remote On/Off are included as standard. Built-in filters for both input and output minimizes the need of external filtering. Full SMD-design with exclusive use of ceramic capacitors guarantees a high reliability and long product lifetime. Typical applications for these converters are industrial electronics, instrumentation, data communication systems and battery operated equipment with limited space available on the PCB. Models Order code Output voltage Output current max. Efficiency typ. THD 12-2410WI 3.3 VDC 3‘500 mA 84 % THD 12-2411WI 5.1 VDC 2’400 mA 85 % 12 VDC 1‘000 mA 85 % 15 VDC 800 mA 85 % ± 5 VDC ± 1‘200 mA 82 % THD 12-2422WI ±12 VDC ± 500 mA 85 % THD 12-2423WI ±15 VDC ± 400 mA 85 % THD 12-4810WI 3.3 VDC 3‘500 mA 84 % THD 12-4811WI 5.1 VDC 2’400 mA 85 % THD 12-4812WI 12 VDC 1‘000 mA 85 % THD 12-2412WI THD 12-2413WI THD 12-2421WI THD 12-4813WI Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC 15 VDC 800 mA 85 % ± 5 VDC ± 1‘200 mA 82 % THD 12-4822WI ±12 VDC ± 500 mA 85 % THD 12-4823WI ±15 VDC ± 400 mA 85 % THD 12-4821WI http://www.tracopower.com (48 VDC nominal) Page of 3

PDF

Документация на серию THD12WI

THD12

Дата модификации: 04.10.2006

Размер: 100.5 Кб

3 стр.

найти THD12WI.pdf

Товары серии THD12WI

Наименование	Упаковка	U2	I2
THD 12-2410WI (TRACO)	в линейках 10 шт	—	—
THD 12-2411WI (TRACO)	в линейках 10 шт	—	—
THD 12-2412WI (TRACO)	в линейках 10 шт	—	—
THD 12-2413WI (TRACO)	в линейках 10 шт	—	—
THD 12-2421WI (TRACO)	в линейках 10 шт
THD 12-2422WI (TRACO)	в линейках 10 шт
THD 12-2423WI (TRACO)	в линейках 10 шт
THD 12-4810WI (TRACO)		—	—
THD 12-4811WI (TRACO)	в линейках 10 шт	—	—
THD 12-4812WI (TRACO)	в линейках 10 шт	—	—
THD 12-4813WI (TRACO)	12 шт	—	—
THD 12-4821WI (TRACO)
THD 12-4822WI (TRACO)	1 шт
THD 12-4823WI (TRACO)	в линейках 10 шт