Серия DC-DC модульных преобразователей THD15N

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Рабочая температура
Схема параллельного включения
Сертификаты медицинские

Документация на серию THD15N

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THD 15N Series, 15 Watt CB Scheme Features ◆ Highest power density in DIP 24 package ◆ Shielded metal case with isolated UL 60950-1 UL 60950-1 baseplate ◆ ◆ ◆ ◆ Very high efficiency up to 91% ◆ ◆ ◆ ◆ ◆ I/O isolation voltage 1500 VDC Wide 2:1 input ranges No minimum load required Input filter meets EN 55022 class A without external components Operating temp. range : –40°C to +85°C Remote On/Off control The THD-15N series models provide 15 Watt output power out of a very compact shielded metal case that occupies only 1 inch² of board space. The converters work with a high efficiency over the full load range and draw a very low input current at no load conditions. All models have a wide 2:1 input voltage range and a precisely regulated output voltage. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical. Industry standard pinout 3-year product warranty Models Output voltage Output current max. Efficiency typ. THD 15-1210N Order code Input voltage range 3.3 VDC 4‘000 mA 87 % THD 15-1211N 5.1 VDC 3‘000 mA 90 % THD 15-1212N 9 – 18 VDC 12 VDC 1‘250 mA 90 % THD 15-1213N (12 VDC nominal) 15 VDC 1’000 mA 90 % THD 15-1221N ±5 VDC ±1’500 mA 86 % THD 15-1222N ±12 VDC ±625 mA 90 % THD 15-1223N ±15 VDC ±500 mA 90 % THD 15-2410N 3.3 VDC 4‘000 mA 88 % THD 15-2411N 5.1 VDC 3‘000 mA 90 % 1‘250 mA 91 % THD 15-2412N 18 – 36 VDC 12 VDC THD 15-2413N (24 VDC nominal) 15 VDC 1’000 mA 91 % THD 15-2421N ±5 VDC ±1’500 mA 87 % THD 15-2422N ±12 VDC ±625 mA 90 % THD 15-2423N ±15 VDC ±500 mA 90 % THD 15-4810N 3.3 VDC 4‘000 mA 88 % THD 15-4811N 5.1 VDC 3‘000 mA 90 % THD 15-4812N 36 – 75 VDC 12 VDC 1‘250 mA 90 % THD 15-4813N (48 VDC nominal) 15 VDC 1’000 mA 91 % THD 15-4821N ±5 VDC ±1’500 mA 87 % THD 15-4822N ±12 VDC ±625 mA 90 % THD 15-4823N ±15 VDC ±500 mA 90 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию THD15N 

THN15

Дата модификации: 28.01.2016

Размер: 161.6 Кб

3 стр.

DC/DC Converters THD 15N Series, 15 Watt CdBing Scheme n pULe 60950-1 Features ◆ Highest power density in DIP 24 package ◆ Shielded metal case with isolated UL 60950-1 baseplate ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Very high efficiency up to 91% Wide 2:1 input ranges No minimum load required Input filter meets EN 55022 class A without external components I/O isolation voltage 1500 VDC Operating temp. range : –40°C to +85°C Remote On/Off control The THD-15N series models provide 15 Watt output power out of a very compact Industry standard pinout shielded metal case that occupies only 1 inch² of board space. The converters work with a high efficiency over the full load range and draw a very low input current at no load conditions. All models have a wide 2:1 input voltage range and a precisely regulated output voltage. Typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on PCB is critical. 3-year product warranty Models Output voltage Output current max. Efficiency typ. THD 15-1210N Order code Input voltage range 3.3 VDC 4‘000 mA 87 % THD 15-1211N 5.1 VDC 3‘000 mA 90 % THD 15-1212N 9 – 18 VDC 12 VDC 1‘250 mA 90 % THD 15-1213N (12 VDC nominal) 15 VDC 1’000 mA 90 % THD 15-1221N ±5 VDC ±1’500 mA 86 % THD 15-1222N ±12 VDC ±625 mA 90 % THD 15-1223N ±15 VDC ±500 mA 90 % THD 15-2410N 3.3 VDC 4‘000 mA 88 % THD 15-2411N 5.1 VDC 3‘000 mA 90 % 1‘250 mA 91 % THD 15-2412N 18 – 36 VDC 12 VDC THD 15-2413N (24 VDC nominal) 15 VDC 1’000 mA 91 % THD 15-2421N ±5 VDC ±1’500 mA 87 % THD 15-2422N ±12 VDC ±625 mA 90 % THD 15-2423N ±15 VDC ±500 mA 90 % THD 15-4810N 3.3 VDC 4‘000 mA 88 % THD 15-4811N 5.1 VDC 3‘000 mA 90 % THD 15-4812N 36 – 75 VDC 12 VDC 1‘250 mA 90 % THD 15-4813N (48 VDC nominal) 15 VDC 1’000 mA 91 % THD 15-4821N ±5 VDC ±1’500 mA 87 % THD 15-4822N ±12 VDC ±625 mA 90 % THD 15-4823N ±15 VDC ±500 mA 90 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию THD15N 

THN15

Дата модификации: 26.10.2012

Размер: 203 Кб

3 стр.

    Товары серии THD15N

    Наименование i Упаковка P вых Каналов U вх Выход Возможности U вх ном. U1 I1 КПД Размер U2 I2
    THD 15-1210N (TRACO) 31.8×20.3×10.2 мм
    THD 15-1211N (TRACO) 4 шт 31.8×20.3×10.2 мм
    THD 15-1212N (TRACO) 1 шт 31.8×20.3×10.2 мм
    THD 15-1213N (TRACO) 31.8×20.3×10.2 мм
    THD 15-1221N (TRACO) 1 шт 31.8×20.3×10.2 мм
    THD 15-1222N (TRACO) 2 шт 31.8×20.3×10.2 мм
    THD 15-1223N (TRACO) в линейках 10 шт 31.8×20.3×10.2 мм
    THD 15-2410N (TRACO) 1 шт 31.8×20.3×10.2 мм
    THD 15-2411N (TRACO) в линейках 10 шт 31.8×20.3×10.2 мм
    THD 15-2412N (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, DIP24; P вых: 15 Вт; #: 1; U вх: 18... в линейках 10 шт 31.8×20.3×10.2 мм
    THD 15-2413N (TRACO) 10 шт 31.8×20.3×10.2 мм
    THD 15-2421N (TRACO) 4 шт 31.8×20.3×10.2 мм
    THD 15-2422N (TRACO) в линейках 10 шт 31.8×20.3×10.2 мм
    THD 15-2423N (TRACO) в линейках 10 шт 31.8×20.3×10.2 мм
    THD 15-4810N (TRACO) в линейках 10 шт 31.8×20.3×10.2 мм
    THD 15-4811N (TRACO) 10 шт 31.8×20.3×10.2 мм
    THD 15-4812N (TRACO) 20 шт 31.8×20.3×10.2 мм
    THD 15-4813N (TRACO) 31.8×20.3×10.2 мм
    THD 15-4821N (TRACO) 31.8×20.3×10.2 мм
    THD 15-4822N (TRACO) 31.8×20.3×10.2 мм
    THD 15-4823N (TRACO) 31.8×20.3×10.2 мм
    THD15-1210N (TRACO) 31.8×20.3×10.7 мм
    THD15-1211N (TRACO) 31.8×20.3×10.7 мм
    THD15-1212N (TRACO) 31.8×20.3×10.7 мм
    THD15-1213N (TRACO) 31.8×20.3×10.7 мм
    THD15-1221N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -5V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-1222N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-1223N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-2410N (TRACO) 31.8×20.3×10.7 мм
    THD15-2411N (TRACO) 31.8×20.3×10.7 мм
    THD15-2412N (TRACO) 31.8×20.3×10.7 мм
    THD15-2413N (TRACO) 31.8×20.3×10.7 мм
    THD15-2421N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -5V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-2422N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-2423N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-4810N (TRACO) 31.8×20.3×10.7 мм
    THD15-4811N (TRACO) 31.8×20.3×10.7 мм
    THD15-4812N (TRACO) 31.8×20.3×10.7 мм
    THD15-4813N (TRACO) 31.8×20.3×10.7 мм
    THD15-4821N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -5V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-4822N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм
    THD15-4823N (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED 31.8×20.3×10.7 мм