Серия DC-DC модульных преобразователей THI2M

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Рабочая температура
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию THI2M

DC/DC Converter THI 2M Series, 2 Watt • • • DIP-16 Package • Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP • • • Industrial safety to IEC/EN/UL 60950-1 Unregulated device I/O isolation 3000 VACrms rated for 300 Vrms working voltage ES 60601-1 IEC 60601-1 UL 62368-1 IEC 62368-1 Operating temp. range –25°C to +80°C The THI 2M series is a new range of ultra-compact 2W DC/DC-converters providing a high I/O-isolation voltage of 3000 VAC. With a reinforced I/O-isolation 3-years product warranty system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required to meet requested safety standards. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order Code Input Voltage Range THI 2-0511M THI 2-0512M THI 2-0513M THI 2-0522M THI 2-0523M THI 2-1211M THI 2-1212M THI 2-1213M THI 2-1222M THI 2-1223M THI 2-2411M THI 2-2412M THI 2-2413M THI 2-2422M THI 2-2423M www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA August 27, 2021 Vnom Efficiency Imax –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA typ. 66 % 66 % 66 % 72 % 73 % 66 % 66 % 66 % 74 % 75 % 66 % 66 % 66 % 74 % 75 % Page 1 / 4

PDF

Документация на THI 2-0511M

THI 2M Datasheet 2 Watt DC/DC converter, industrial/medical, ±10% input, reinforced, high isolation (3000 VAC), 2 x MOOP, encapsulated, DIP-16

Дата модификации: 27.08.2021

Размер: 836.8 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THI 2M Series, 2 Watt CB Scheme Features ◆ Ultracompact DIP 16 package ◆ I/O isolation 3000 VACrms rated for IEC 60950-1 IEC 60601-1 UL 60950-1 UL 60601-1 300 Vrms working voltage ◆ Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP ◆ Industrial safety to IEC/EN/UL 60950-1 ◆ Operating temp. range –40°C to +71°C ◆ 3-years product warranty The THI 2M series is a new range of ultra-compact 2W DC/DC-converters providing a high I/O-isolation voltage of 3000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required to meet requested safety standards. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THI 2-0511M 5 VDC 400 mA 66 % THI 2-0512M 12 VDC 165 mA 66 % THI 2-0513M THI 2-0522M 5.0 VDC ± 10% (nominal 5 VDC) 15 VDC 133 mA 66 % ±12 VDC ±83 mA 72 % THI 2-0523M ±15 VDC ±66 mA 73 % THI 2-1211M 5 VDC 400 mA 66 % THI 2-1212M 12.0 VDC ± 10% 12 VDC 165 mA 66 % THI 2-1213M (nominal 12 VDC) 15 VDC 133 mA 66 % THI 2-1222M ±12 VDC ±83 mA 74 % THI 2-1223M ±15 VDC ±66 mA 75 % THI 2-2411M 5 VDC 400 mA 66 % THI 2-2412M 24 VDC ± 10% 12 VDC 165 mA 66 % THI 2-2413M (nominal 24 VDC) 15 VDC 133 mA 66 % THI 2-2422M ±12 VDC ±83 mA 74 % THI 2-2423M ±15 VDC ±66 mA 75 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию THI2M

tes2n

Дата модификации: 14.03.2014

Размер: 159.8 Кб

3 стр.

найти THI2M.pdf

Товары серии THI2M

Наименование	Упаковка	Возможности	I1	КПД	Размер	U2	I2
THI 2-0511M (TRACO)	в линейках 10 шт				23.8×13.7×8.6 мм	—	—
THI 2-0512M (TRACO)					23.8×13.7×8.6 мм	—	—
THI 2-0513M (TRACO)	в линейках 10 шт				23.8×13.7×8.6 мм	—	—
THI 2-0522M (TRACO)					23.8×13.7×8.6 мм
THI 2-0523M (TRACO)					23.8×13.7×8.6 мм
THI 2-1211M (TRACO)	в линейках 10 шт				23.8×13.7×8.6 мм	—	—
THI 2-1212M (TRACO)					23.8×13.7×8.6 мм	—	—
THI 2-1213M (TRACO)					23.8×13.7×8.6 мм	—	—
THI 2-1222M (TRACO)					23.8×13.7×8.6 мм
THI 2-1223M (TRACO)					23.8×13.7×8.6 мм
THI 2-2411M (TRACO)	в линейках 10 шт				23.8×13.7×8.6 мм	—	—
THI 2-2412M (TRACO)					23.8×13.7×8.6 мм	—	—
THI 2-2413M (TRACO)					23.8×13.7×8.6 мм	—	—
THI 2-2422M (TRACO)	1 шт				23.8×13.7×8.6 мм
THI 2-2423M (TRACO)					23.8×13.7×8.6 мм
THI2-0511M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-0512M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-0513M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-0522M (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED	—	—	23.8×13.7×8.85 мм	—	—
THI2-0523M (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED	—	—	23.8×13.7×8.85 мм	—	—
THI2-1211M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-1212M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-1213M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-1222M (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED	—	—	23.8×13.7×8.85 мм	—	—
THI2-1223M (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED	—	—	23.8×13.7×8.85 мм	—	—
THI2-2411M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-2412M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-2413M (TRACO)			—	—	23.8×13.7×8.85 мм	—	—
THI2-2422M (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED	—	—	23.8×13.7×8.85 мм	—	—
THI2-2423M (TRACO)		ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED	—	—	23.8×13.7×8.85 мм	—	—