Серия DC-DC модульных преобразователей THL10WI

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Напряжение изоляции вход-выход
Уровень пульсаций
Напряжение 2 выхода
Ток 2 выхода
Схема параллельного включения
Сертификаты медицинские

Документация на серию THL10WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THL 10WI Series, 10 Watt Features ◆ 10 Watt in 1” x 1” package ◆ Shielded metal case with isolated ing nd e p CB Scheme 226037 UL 60950-1 UL 60950-1 baseplate ◆ Ultrawide 4:1 input voltage ranges ◆ Remote On/Off control ◆ Operating temp. range –40°C to +75°C and up to +85°C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ Input filter meets EN 55022 class A without external components ◆ Cost optimized design ◆ Industry standard pinout ◆ 3-year product warranty The THL 10WI is a series of general purpose 10 Watt dc/dc-converters packed in the compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2” size products. The industrial standard pinout, the ultra wide 4:1 input voltage range and the input filter that meets EN 55022 Class A without external components make these converters easy to design in and suitable for to cost optimize many existing and new applications. The models have a remote On/Off control, short circuit and overvoltage protection and are applicable in temperature ranges of up to +75°C or +85°C with optional mounted heat sink. Typical applications are instrumentation, distributed power architectures in communication and industrial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 10-2410WI 3.3 VDC 2200 mA 86 % THL 10-2411WI 5.1 VDC 2000 mA 84 % THL 10-2412WI 12 VDC 830 mA 86 % THL 10-2413WI 9 – 36 VDC 15 VDC 660 mA 87 % THL 10-2415WI (24 VDC nominal) 24 VDC 410 mA 86 % THL 10-2421WI ±5.0 VDC ±1000 mA 84 % THL 10-2422WI ±12 VDC ±410 mA 86 % THL 10-2423WI ±15 VDC ±330 mA 87 % THL 10-4810WI 3.3 VDC 2200 mA 85 % THL 10-4811WI 5.1 VDC 2000 mA 84 % THL 10-4812WI 12 VDC 830 mA 86 % THL 10-4813WI 18 – 75 VDC 15 VDC 660 mA 87 % THL 10-4815WI (48 VDC nominal) 24 VDC 410 mA 86 % THL 10-4821WI ±5.0 VDC ±1000 mA 84 % THL 10-4822WI ±12 VDC ±410 mA 86 % THL 10-4823WI ±15 VDC ±330 mA 87 % http://www.tracopower.com Page 1 of 4 PDF
Документация на серию THL10WI 

THN15WI

Дата модификации: 05.06.2012

Размер: 259.8 Кб

4 стр.

    Товары серии THL10WI

    Наименование i Упаковка P вых Каналов U вх Выход Возможности Защита U вх ном. U1 I1 КПД Размер T раб
    THL 10-1211 (TRACO) 1 шт 25.4×25.4×10.2 мм
    THL 10-2410WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 7.3 Вт; #: 1; U вх... в линейках 10 шт 25.4×25.4×10.2 мм
    THL 10-2411WI (TRACO) в линейках 10 шт 25.4×25.4×10.2 мм
    THL 10-2412WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 10 Вт; #: 1; U вх:... в линейках 10 шт 25.4×25.4×10.2 мм
    THL 10-2422WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 10 Вт; #: 2; U вх:... в линейках 10 шт 25.4×25.4×10.2 мм
    THL 10-4811WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 10 Вт; #: 1; U вх:... в линейках 10 шт 25.4×25.4×10.2 мм
    THL 10-4815WI (TRACO) в линейках 10 шт 25.4×25.4×10.2 мм
    THL10-2410WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2411WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2412WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2413WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2415WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2421WI (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -5V; SEATED HGT CALCULATED OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2422WI (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-2423WI (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4810WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4811WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4812WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4813WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4815WI (TRACO) OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4821WI (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -5V; SEATED HGT CALCULATED OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4822WI (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -12V; SEATED HGT CALCULATED OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм
    THL10-4823WI (TRACO) ALSO AVAILABLE OUTPUT VOLTAGE: -15V; SEATED HGT CALCULATED OUTPUT OVER CURRENT; OUTPUT OVER VOLTAGE 25.4×25.4×10.7 мм