Серия DC-DC модульных преобразователей THL20WI

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Схема параллельного включения
Сертификаты медицинские

Документация на серию THL20WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THL 20WI Series, 20 Watt Features ◆ Smallest encapsulated 20W converter! CB 226037 Ultra compact size: 1.0” x 1.0” x 0.4” Scheme IEC 60950-1 ◆ Shielded metal case with isolated baseplate ◆ ◆ ◆ ◆ ◆ Ultrawide 4:1 input voltage ranges Very high efficiency up to 90% Output voltage adjustable Remote On/Off control Operating temp. range –40°C to +75°C and up to +85°C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The THL 20WI series is the latest generation of dc-dc converter modules with highest power density. The product achieves 20 Watt output power while it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”. All models have an ultra wide 4:1 input voltage range and precisely regulated output voltages. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to +75°C or +85°C with optional mounted heat sink. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Output voltage Output current max. Efficiency typ. THL 20-2410WI Order code 3.3 VDC 4500 mA 87 % THL 20-2411WI 5.0 VDC 4000 mA 89 % 12 VDC 1670 mA 89 % 15 VDC 1340 mA 89 % THL 20-2412WI THL 20-2413WI THL 20-2415WI Input voltage range 9 – 36 VDC (24 VDC nominal) 24 VDC 835 mA 88 % THL 20-2422WI ±12 VDC ±835 mA 89 % THL 20-2423WI ±15 VDC ±670 mA 89 % THL 20-4810WI 3.3 VDC 4500 mA 88 % THL 20-4811WI 5.0 VDC 4000 mA 89 % THL 20-4812WI 12 VDC 1670 mA 89 % 15 VDC 1340 mA 90 % 24 VDC 835 mA 88 % THL 20-4822WI ±12 VDC ±835 mA 89 % THL 20-4823WI ±15 VDC ±670 mA 89 % THL 20-4813WI THL 20-4815WI http://www.tracopower.com 18 – 75 VDC (48 VDC nominal) Page 1 of 4 PDF
Документация на серию THL20WI 

THN15WI

Дата модификации: 05.06.2012

Размер: 245 Кб

4 стр.

    Товары серии THL20WI

    Наименование i Упаковка P вых Каналов U вх Выход Возможности U вх ном. U1 I1 КПД Размер T раб
    THL 20-2411WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 20 Вт; #: 1; U вх:... в линейках 10 шт 25.4×25.4×10.2 мм
    THL 20-2412WI (TRACO)
     
    		в линейках 10 шт 25.4×25.4×10.2 мм
    THL 20-2413WI (TRACO)
     
    		DC-DC модульный преобразователь - Монтаж: на плату, 1x1 inch; P вых: 20 Вт; #: 1; U вх:... в линейках 10 шт 25.4×25.4×10.2 мм
    THL 20-2415WI (TRACO)
     
    		1 шт 25.4×25.4×10.2 мм
    THL 20-4811WI (TRACO)
     
    		в линейках 10 шт 25.4×25.4×10.2 мм
    THL 20-4812WI (TRACO)
     
    		в линейках 10 шт 25.4×25.4×10.2 мм
    THL 20-4815WI (TRACO)
     
    		10 шт 25.4×25.4×10.2 мм
    THL20-2410WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 14.85W, Hybrid — 25.4×25.4×10.7 мм
    THL20-2411WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-2412WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-2413WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-2415WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-2422WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-2423WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-4810WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 14.85W, Hybrid — 25.4×25.4×10.7 мм
    THL20-4811WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-4812WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-4813WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-4822WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid — 25.4×25.4×10.7 мм
    THL20-4823WI (TRACO)
     
    		DC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid — 25.4×25.4×10.7 мм