Серия DC-DC модульных преобразователей THL3WI

Общие характеристики

Раздел DC-DC модульные преобразователи
Выходная мощность
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 23.8×13.7×8 мм
Рабочая температура

Документация на серию THL3WI

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THL 3WI(SM) Series, 3 Watt CB Features ◆ Compact design in SMD or DIP package ◆ Ultra wide 4:1 input voltage range ◆ Fully regulated outputs ◆ I/O isolation 1500 VDC ◆ SMD version qualfied for leadfree re 226037 Scheme IEC 60950-1 flow solder process, MSL 2a ◆ ◆ ◆ ◆ Operating temp. range –40°C to +85°C Short circuit protection Remote On/Off control Input filter to meet EN 55022, class A without external components ◆ 3-year product warranty The THL 3WI(SM) series is a family of compact 3 W dc/dc-converters with 4:1 input voltage ranges. The product is available in SMD- or DIP-package. The internal filter which meets EN55022 Class A without external components makes the converter easy to design in. They come with remote On/Off and short circuit protection. THL 3WI(SM) converter is an excellent solution for data- and telecom applications and for instrumentation and Industrial electronics. Models Order code DIP models THL 3-2410WI Order code SMD models THL 3-2410WISM THL 3-2411WI THL 3-2411WISM THL 3-2412WI THL 3-2412WISM THL 3-2413WI THL 3-2413WISM 9 – 36 VDC THL 3-2415WI THL 3-2415WISM (24 VDC nominal) THL 3-2421WI THL 3-2422WI Input voltage range Output voltage 3.3 VDC Output current max. 600 mA Efficiency typ. 75 % 5.0 VDC 600 mA 78 % 12 VDC 250 mA 80 % 15 VDC 200 mA 80 % 24 VDC 125 mA 80 % THL 3-2421WISM ±5 VDC ±300 mA 77 % THL 3-2422WISM ±12 VDC ±125 mA 80 % THL 3-2423WI THL 3-2423WISM ±15 VDC ±100 mA 80 % THL 3-4810WI THL 3-4810WISM 3.3 VDC 600 mA 75 % THL 3-4811WI THL 3-4811WISM 5.0 VDC 600 mA 78 % THL 3-4812WI THL 3-4812WISM 12 VDC 250 mA 80 % THL 3-4813WI THL 3-4813WISM 18 – 75 VDC 15 VDC 200 mA 80 % THL 3-4815WI THL 3-4815WISM (48 VDC nominal) 24 VDC 125 mA 80 % THL 3-4821WI THL 3-4821WISM ±5 VDC ±300 mA 77 % THL 3-4822WI THL 3-4822WISM ±12 VDC ±125 mA 80 % THL 3-4823WI THL 3-4823WISM ±15 VDC ±100 mA 80 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию THL3WI 

Дата модификации: 17.08.2012

Размер: 245 Кб

3 стр.

    Товары серии THL3WI

    Наименование i Упаковка Монтаж Каналов U вх Выход U вх ном. U1 I1 КПД U2 I2
    THL 3-2410WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, DIP; P вых: 3 Вт; #: 1; U вх: 9...3... в линейках 10 шт
    THL 3-2410WISM (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 3 Вт; #: 2; U вх: 9...3... в линейках 10 шт
    THL 3-2411WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, DIP; P вых: 3 Вт; #: 1; U вх: 9...3... в линейках 10 шт
    THL 3-2411WISM (TRACO) 1 шт
    THL 3-2412WI (TRACO) 10 шт
    THL 3-2412WISM (TRACO) 10 шт
    THL 3-2413WI (TRACO) 10 шт
    THL 3-2413WISM (TRACO)
    THL 3-2415WI (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, DIP; P вых: 3 Вт; #: 1; U вх: 9...3... в линейках 10 шт
    THL 3-2415WISM (TRACO) в линейках 10 шт
    THL 3-2421WI (TRACO) 1 шт
    THL 3-2421WISM (TRACO) в линейках 10 шт
    THL 3-2422WI (TRACO)
    THL 3-2422WISM (TRACO) 6 шт
    THL 3-2423WI (TRACO) в линейках 10 шт
    THL 3-2423WISM (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 3 Вт; #: 2; U вх: 9...3... в линейках 10 шт
    THL 3-4810WI (TRACO) 10 шт
    THL 3-4810WISM (TRACO)
    THL 3-4811WI (TRACO)
    THL 3-4811WISM (TRACO) 17 шт
    THL 3-4812WI (TRACO)
    THL 3-4812WISM (TRACO) 5 шт
    THL 3-4813WI (TRACO)
    THL 3-4813WISM (TRACO)
    THL 3-4815WI (TRACO)
    THL 3-4815WISM (TRACO)
    THL 3-4821WI (TRACO)
    THL 3-4821WISM (TRACO) 10 шт
    THL 3-4822WI (TRACO)
    THL 3-4822WISM (TRACO)
    THL 3-4823WI (TRACO) 1 шт
    THL 3-4823WISM (TRACO)