Серия DC-DC модульных преобразователей THL6WISM

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Рабочая температура
Схема параллельного включения
Сертификаты медицинские

Документация на серию THL6WISM

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THL 6WISM Series, 6 Watt CB Features ◆ Compact design in SMD package ◆ Ultra wide 4:1 input voltage range ◆ Fully regulated outputs ◆ I/O isolation 1500 VDC ◆ Operating temp. range –40°C to +75°C ◆ Short circuit protection ◆ Input filter to meet EN 55022, class A ◆ Qualified for leadfree reflow solder 226037 Scheme IEC 60950-1 process ◆ 3-year product warranty The THL 6WISM series is a family of compact 6 W dc/dc-converters with 4:1 input voltage ranges. The product is available in SMD-package which is 31% smaller than a standard DIP-24 package. The internal filter to meet EN55022 Class A without external components makes these converters easy to design in. They come with remote On/Off and short circuit protection. THL 6WISM converter is an excellent solution for data- and telecom applications and for instrumentation and industrial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 6-2410WISM 3.3 VDC 1450 mA 76 % THL 6-2411WISM 5.0 VDC 1200 mA 79 % THL 6-2412WISM 12 VDC 500 mA 83 % THL 6-2413WISM 9 – 36 VDC 15 VDC 400 mA 83 % THL 6-2415WISM (nominal 24 VDC) 24 VDC 250 mA 83 % THL 6-2421WISM ±5 VDC ±600 mA 82 % THL 6-2422WISM ±12 VDC ±250 mA 83 % THL 6-2423WISM ±15 VDC ±200 mA 83 % THL 6-4810WISM 3.3 VDC 1450 mA 76 % THL 6-4811WISM 5.0 VDC 1200 mA 79 % THL 6-4812WISM 12 VDC 500 mA 83 % THL 6-4813WISM 18 – 75 VDC 15 VDC 400 mA 83 % THL 6-4815WISM (nominal 48 VDC) 24 VDC 250 mA 83 % THL 6-4821WISM ±5 VDC ±600 mA 82 % THL 6-4822WISM ±12 VDC ±250 mA 83 % THL 6-4823WISM ±15 VDC ±200 mA 83 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию THL6WISM 

Дата модификации: 24.07.2012

Размер: 164.3 Кб

3 стр.

    Товары серии THL6WISM

    Наименование i Упаковка Каналов U вх Выход Возможности U вх ном. U1 I1 КПД Размер U2 I2
    THL 6-2410WISM (TRACO) 1 шт 25.4×22×10.05 мм
    THL 6-2411WISM (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 6 Вт; #: 1; U вх: 9...3... в линейках 10 шт 25.4×22×10.05 мм
    THL 6-2412WISM (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 6 Вт; #: 1; U вх: 9...3... в линейках 10 шт 25.4×22×10.05 мм
    THL 6-2413WISM (TRACO) 10 шт 25.4×22×10.05 мм
    THL 6-2415WISM (TRACO) 1 шт 25.4×22×10.05 мм
    THL 6-2421WISM (TRACO) 1 шт 25.4×22×10.05 мм
    THL 6-2422WISM (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 6 Вт; #: 2; U вх: 9...3... в линейках 10 шт 25.4×22×10.05 мм
    THL 6-2423WISM (TRACO) DC-DC модульный преобразователь - Монтаж: на плату, SMD; P вых: 6 Вт; #: 2; U вх: 9...3... в линейках 10 шт 25.4×22×10.05 мм
    THL 6-4810WISM (TRACO) 80 шт 25.4×22×10.05 мм
    THL 6-4811WISM (TRACO) 2 шт 25.4×22×10.05 мм
    THL 6-4812WISM (TRACO) 2 шт 25.4×22×10.05 мм
    THL 6-4813WISM (TRACO) 15 шт 25.4×22×10.05 мм
    THL 6-4815WISM (TRACO) 25.4×22×10.05 мм
    THL 6-4821WISM (TRACO) 25.4×22×10.05 мм
    THL 6-4822WISM (TRACO) 25.4×22×10.05 мм
    THL 6-4823WISM (TRACO) 25.4×22×10.05 мм
    THL6-2410WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2411WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2412WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2413WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2415WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2421WISM (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2422WISM (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-2423WISM (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4810WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4811WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4812WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4813WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4815WISM (TRACO) DC-DC Regulated Power Supply Module, 1 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4821WISM (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4822WISM (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid 22×20.3×10.45 мм
    THL6-4823WISM (TRACO) DC-DC Regulated Power Supply Module, 2 Output, 6W, Hybrid 22×20.3×10.45 мм