Серия DC-DC модульных преобразователей THN 20WIR

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Возможности
Комплекс защит короткого замыкания, перегрузки, перенапряжения
КПД
Напряжение изоляции вход-выход
Размер 25.4×25.4×9.9 мм
Рабочая температура

Документация на серию THN 20WIR

DC/DC Converter THN 20WIR Series, 20 Watt • • Compact 1” x 1” metal package • Qualification for fire behavior according to EN 45545-2 • Wide 4:1 input voltage: 9-36, 18-75, 36-160 VDC • • • • • • EN 50155 and EN 61373 approval for railway applications UL 62368-1 IEC 62368-1 Operating temperature range -40 to +65 °C without derating The THN 20WIR series is a family of ruggedized 20 Watt DC/DC converters for highest reliability in harsh environments. The converters have a wide 4:1 input range and increased resistance against electromagnetic interference, shock/viHigh efficiency up to 91% bration and thermal shock and come in a six-side shielded 1” x 1” metal package. The innovative design provides high efficiencies up to 91% and thus en3000 VDC I/O-isolation able an operating temperature range from -40 to +65°C without derating. The Protection against overload, overvoltage approvals according to standards EN 50155 and EN 61373 qualify them for and short circuit railway and transportation systems. Additional qualification for the fire behavior of components according to EN 45545-2 and the safety approval according Remote On/Off and Trim function IEC/EN 62368-1, UL62368-1 support a potential compliance test of the appli3-year product warranty cation. Built-in features like an internal EN 55032 class A filter, input undervoltage-lockout, short circuit protection, remote On/Off and output voltage trim make this series suitable for almost any application demands and thus facilitate the design-in process. Models Order Code Input Voltage Range THN 20-2410WIR THN 20-2411WIR THN 20-2412WIR THN 20-2413WIR THN 20-2415WIR THN 20-2422WIR THN 20-2423WIR THN 20-2425WIR THN 20-4810WIR THN 20-4811WIR THN 20-4812WIR THN 20-4813WIR THN 20-4815WIR THN 20-4822WIR THN 20-4823WIR THN 20-4825WIR THN 20-7210WIR THN 20-7211WIR THN 20-7212WIR THN 20-7213WIR THN 20-7215WIR THN 20-7222WIR THN 20-7223WIR THN 20-7225WIR www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) 36 - 160 VDC (110 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 5'500 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 833 mA 667 mA 417 mA 5'500 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 833 mA 667 mA 417 mA 5'500 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 833 mA 667 mA 417 mA February 10, 2021 Vnom Efficiency Imax –12 VDC –15 VDC –24 VDC 833 mA 667 mA 417 mA –12 VDC –15 VDC –24 VDC 833 mA 667 mA 417 mA –12 VDC –15 VDC –24 VDC 833 mA 667 mA 417 mA typ. 88 % 89 % 89 % 89 % 91 % 89 % 90 % 91 % 89 % 90 % 89 % 90 % 91 % 89 % 90 % 91 % 88 % 90 % 90 % 90 % 91 % 90 % 90 % 91 % Page 1 / 5 PDF
Документация на серию THN 20WIR 

THN 20WIR Datasheet 20 Watt DC/DC converter, railway, 4:1 input, regulated, 3000 VDC isolation, encapsulated, 1" x 1" metal package

Дата модификации: 10.02.2021

Размер: 919.2 Кб

5 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

    Товары серии THN 20WIR

    Наименование i Упаковка P вых Каналов U вх Выход U вх ном. U1 I1 U2 I2
    THN 20-2410WIR (TRACO)
     
    		— —
    THN 20-2411WIR (TRACO)
     
    		— —
    THN 20-2412WIR (TRACO)
     
    		в линейках 10 шт — —
    THN 20-2413WIR (TRACO)
     
    		— —
    THN 20-2415WIR (TRACO)
     
    		— —
    THN 20-2422WIR (TRACO)
     
    THN 20-2423WIR (TRACO)
     
    		6 шт
    THN 20-2425WIR (TRACO)
     
    THN 20-4810WIR (TRACO)
     
    		— —
    THN 20-4811WIR (TRACO)
     
    		— —
    THN 20-4812WIR (TRACO)
     
    		— —
    THN 20-4813WIR (TRACO)
     
    		— —
    THN 20-4815WIR (TRACO)
     
    		— —
    THN 20-4822WIR (TRACO)
     
    THN 20-4823WIR (TRACO)
     
    THN 20-4825WIR (TRACO)
     
    THN 20-7210WIR (TRACO)
     
    		— —
    THN 20-7211WIR (TRACO)
     
    		— —
    THN 20-7212WIR (TRACO)
     
    		— —
    THN 20-7213WIR (TRACO)
     
    		— —
    THN 20-7215WIR (TRACO)
     
    		в линейках 10 шт — —
    THN 20-7222WIR (TRACO)
     
    THN 20-7223WIR (TRACO)
     
    THN 20-7225WIR (TRACO)
     
    		1 шт

    THN 20WIR публикации

    28 мая 2021
    новость

    THN/WIR – DC/DC нового поколения от TRACO для жестких условий эксплуатации

    Компания TRACO выпустила новое поколение DC/DC–преобразователей для жестких условий железной дороги – семейство THN/WIR. Оно включает в себя три серии: THN 10WIR, THN 15WIR и THN 20WIR, на выходную мощность от 10, 15 и 20 Вт соответственно.... ...читать