Серия DC-DC модульных преобразователей TMA

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Комплекс защит
	Напряжение изоляции вход-выход
	Рабочая температура

Документация на серию TMA

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TMA Series, 1 Watt Features ◆ Single-in-line (SIP) package ◆ Single and dual output models ◆ I/O isolation 1‘000 VDC ◆ High efficiency up to 81% ◆ Operating temp. range –40°C to +85°C ◆ Industry standard pinout ◆ 100% Burn-in (8 h) ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TMA series are miniature, isolated 1 W DC/DC-converters in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMDtechnology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage TMA 0505S 5 VDC TMA 0512S TMA 0515S Output voltage 5 VDC ± 10% Output current max. 200 mA Efficiency typ. 71 % 12 VDC 80 mA 78 % 15 VDC 65 mA 78 % TMA 0505D ± 5 VDC ±100 mA 72 % TMA 0512D ±12 VDC ± 40 mA 78 % TMA 0515D ±15 VDC ±35 mA 79 % TMA 1205S 5 VDC 200 mA 73 % TMA 1212S TMA 1215S 12 VDC ± 10% 12 VDC 80 mA 80 % 15 VDC 65 mA 80 % TMA 1205D ±5 VDC ±100 mA 74 % TMA 1212D ±12 VDC ±40 mA 81 % TMA 1215D ±15 VDC ±35 mA 81 % TMA 1505S 5 VDC 200 mA 73 % TMA 1512S 12 VDC 80 mA 80 % TMA 1515S 15 VDC ± 10% TMA 1505D 15 VDC 65 mA 80 % ±5 VDC ±100 mA 74 % TMA 1512D ±12 VDC ±40 mA 81 % TMA 1515D ±15 VDC ±35 mA 81 % TMA 2405S 5 VDC 200 mA 71 % TMA 2412S 12 VDC 80 mA 78 % TMA 2415S TMA 2405D 24 VDC ± 10% 15 VDC 65 mA 79 % ±5 VDC ±100 mA 72 % TMA 2412D ±12 VDC ±40 mA 79 % TMA 2415D ±15 VDC ±35 mA 80 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TMA

datasheet

Дата модификации: 11.02.2014

Размер: 138.7 Кб

3 стр.

DC/DC Converters TMA Series, 1 Watt RoHS compliant Features ◆ Single-in-Line (SIL) Package ◆ Single and Dual Output Models ◆ I/O-Isolation 1‘000 VDC ◆ High Efﬁciency up to 81% ◆ Operating Temperature –40°C to +85°C ◆ Industry Standard Pinout ◆ 100% Burn-in (8 h) ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TMA series are miniature, isolated 1 W DC/DC-converters in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMDtechnology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage TMA 0505S Output voltage Output current max. Efﬁciency typ. 5 VDC 200 mA 71 % 12 VDC 80 mA 78 % 15 VDC 65 mA 78 % TMA 0505D ± 5 VDC ±100 mA 72 % TMA 0512D ±12 VDC ± 40 mA 78 % TMA 0515D ±15 VDC ± 35 mA 79 % TMA 1205S 5 VDC 200 mA 73 % 12 VDC 80 mA 80 % 15 VDC 65 mA 80 % TMA 1205D ± 5 VDC ±100 mA 74 % TMA 1212D ±12 VDC ± 40 mA 81 % TMA 1215D ±15 VDC ± 35 mA 81 % TMA 1505S 5 VDC 200 mA 73 % TMA 1512S 12 VDC 80 mA 80 % TMA 0512S TMA 0515S 5 VDC ± 10% TMA 1212S TMA 1215S TMA 1515S 12 VDC ± 10% 15 VDC ± 10% 15 VDC 65 mA 80 % TMA 1505D ± 5 VDC ±100 mA 74 % TMA 1512D ±12 VDC ± 40 mA 81 % TMA 1515D ±15 VDC ± 35 mA 81 % TMA 2405S 5 VDC 200 mA 71 % TMA 2412S 12 VDC 80 mA 78 % TMA 2415S 24 VDC ± 10% 15 VDC 65 mA 79 % TMA 2405D ± 5 VDC ±100 mA 72 % TMA 2412D ±12 VDC ± 40 mA 79 % TMA 2415D ±15 VDC ± 35 mA 80 % http://www.tracopower.com Page 1 of 3

PDF

Документация на серию TMA

TMA.indd

Дата модификации: 19.01.2006

Размер: 155.1 Кб

3 стр.

найти TMA.pdf

Товары серии TMA

Наименование	Упаковка	U2	I2	Размер
TMA 0505D (TRACO)	в линейках 10 шт			19.5×10.2×6.1 мм
TMA 0505S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×6.1 мм
TMA 0512D (TRACO)	в линейках 10 шт			19.5×10.2×6.1 мм
TMA 0512S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×6.1 мм
TMA 0515D (TRACO)	в линейках 10 шт			19.5×10.2×6.1 мм
TMA 0515S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×6.1 мм
TMA 1205D (TRACO)	в линейках 10 шт			19.5×10.2×6.1 мм
TMA 1205S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×6.1 мм
TMA 1212D (TRACO)	в линейках 10 шт			19.5×10.2×6.1 мм
TMA 1212S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×6.1 мм
TMA 1215D (TRACO)	в линейках 10 шт			19.5×10.2×6.1 мм
TMA 1215S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×6.1 мм
TMA 1505D (TRACO)	в линейках 10 шт			19.5×10.2×7.1 мм
TMA 1505S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×7.1 мм
TMA 1512D (TRACO)	в линейках 10 шт			19.5×10.2×7.1 мм
TMA 1512S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×7.1 мм
TMA 1515D (TRACO)	в линейках 10 шт			19.5×10.2×7.1 мм
TMA 1515S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×7.1 мм
TMA 2405D (TRACO)	в линейках 10 шт			19.5×10.2×7.1 мм
TMA 2405S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×7.1 мм
TMA 2412D (TRACO)	в линейках 10 шт			19.5×10.2×7.1 мм
TMA 2412S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×7.1 мм
TMA 2415D (TRACO)	в линейках 10 шт			19.5×10.2×7.1 мм
TMA 2415S (TRACO)	в линейках 10 шт	—	—	19.5×10.2×7.1 мм

TMA публикации

28 ноября 2007

статья

DC/DC-преобразователи MEAN WELL Год 2007

Основная номенклатура источников питания компании MEAN WELL предназначена для нежестких условий эксплуатации, но в последнее время фирма стала выпускать DC/DC–преобразователи и для индустриального... ...читать