Серия DC-DC модульных преобразователей TMR3WIE

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Выходная мощность
	Комплекс защит
	Уровень пульсаций
	Напряжение изоляции вход-выход
	Рабочая температура
	Схема параллельного включения
	Сертификаты медицинские

Документация на серию TMR3WIE

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TMR 3WIE Series, 3 Watt Features ◆ Wide 4:1 input voltage range ◆ Compact SIP-8 package ◆ Cost optimized design ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Remote On/Off control ◆ 3-year product warranty The TMR-3WIE series is a family of isolated 3 W dc-dc converter modules with regulated output, featuring wide 4:1 input voltage ranges. The product comes in a compact SIP-8 plastic package with small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40°C to +85°C operation temperature. Further features include remote On/Off control and continuous short circuit protection. The compact dimensions and cost optimized design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order code TMR 3-1210WIE TMR 3-1211WIE TMR 3-1212WIE TMR 3-1213WIE TMR 3-1221WIE TMR 3-1222WIE TMR 3-1223WIE TMR 3-2410WIE TMR 3-2411WIE TMR 3-2412WIE TMR 3-2413WIE TMR 3-2421WIE TMR 3-2422WIE TMR 3-2423WIE TMR 3-4810WIE TMR 3-4811WIE TMR 3-4812WIE TMR 3-4813WIE TMR 3-4821WIE TMR 3-4822WIE TMR 3-4823WIE http://www.tracopower.com Input voltage range 4.5 – 18 VDC (12 VDC nominal) 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Output voltage Output current max. Efficiency typ. 3.3 VDC 5.0 VDC 12 VDC 15 VDC ±5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC ±5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC ±5.0 VDC ±12 VDC ±15 VDC 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 74 % 78 % 80 % 80 % 70 % 80 % 80 % 75 % 80 % 81 % 81 % 79 % 80 % 81 % 74 % 79 % 79 % 79 % 79 % 79 % 80 % Page 1 of 3

PDF

Документация на серию TMR3WIE

Дата модификации: 27.07.2012

Размер: 178.7 Кб

3 стр.

найти TMR3WIE.pdf

Товары серии TMR3WIE

Наименование	Упаковка	I1	КПД	Размер	U2	I2
TMR 3-1210WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм	—	—
TMR 3-1211WIE (TRACO)	8 шт			21.8×9.3×11.2 мм	—	—
TMR 3-1212WIE (TRACO)				21.8×9.3×11.2 мм	—	—
TMR 3-1213WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм	—	—
TMR 3-1221WIE (TRACO)	10 шт			21.8×9.3×11.2 мм
TMR 3-1222WIE (TRACO)				21.8×9.3×11.2 мм
TMR 3-1223WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм
TMR 3-2410WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм	—	—
TMR 3-2411WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм	—	—
TMR 3-2412WIE (TRACO)	4 шт			21.8×9.3×11.2 мм	—	—
TMR 3-2413WIE (TRACO)				21.8×9.3×11.2 мм	—	—
TMR 3-2421WIE (TRACO)				21.8×9.3×11.2 мм
TMR 3-2422WIE (TRACO)				21.8×9.3×11.2 мм
TMR 3-2423WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм
TMR 3-4810WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм	—	—
TMR 3-4811WIE (TRACO)	в линейках 10 шт			21.8×9.3×11.2 мм	—	—
TMR 3-4812WIE (TRACO)				21.8×9.3×11.2 мм	—	—
TMR 3-4813WIE (TRACO)	1 шт			21.8×9.3×11.2 мм	—	—
TMR 3-4821WIE (TRACO)				21.8×9.3×11.2 мм
TMR 3-4822WIE (TRACO)				21.8×9.3×11.2 мм
TMR 3-4823WIE (TRACO)				21.8×9.3×11.2 мм
TMR3-1210WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-1211WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-1212WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-1213WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-1221WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-1222WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-1223WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2410WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2411WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2412WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2413WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2421WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2422WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-2423WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4810WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4811WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4812WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4813WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4821WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4822WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—
TMR3-4823WIE (TRACO)		—	—	21.8×9.3×11.7 мм	—	—