Серия DC-DC модульных преобразователей TRA3

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Схема параллельного включения
Сертификаты медицинские

Документация на серию TRA3

DC/DC Converters TRA 3 Series, 3 Watt CB Scheme Features ◆ Semi-regulated output (load) ◆ Highest power density 3W SIP-Converter ◆ Industry standard pinout ◆ High efficiency up to 89% ◆ I/O isolation voltage 1000 VDC ◆ Operating temperature range UL 60950-1 –40°C to +95°C ◆ 3-year product warranty The TRA 3 series are miniature, I/O-isolated 3W DC/DC converters with a semi load regulation. They are the ideal solution to power drivers and circuits where unregulated DC/DC converters do not meet the input voltage range at load change. Models Order code Input voltage Output current max. Load regulation max. Efficiency typ. 5 VDC 600 mA 8% 83 % 9 VDC 333 mA 7% 87 % TRA 3- 0512 12 VDC 250 mA 7% 85.5 % TRA 3- 0513 15 VDC 200 mA 6% 87.5 % 5 VDC 600 mA 6% 84 % 9 VDC 333 mA 5% 87.5 % TRA 3- 1212 12 VDC 250 mA 4.5 % 88 % TRA 3- 1213 15 VDC 200 mA 4% 89 % TRA 3- 2411 5 VDC 600 mA 5.8 % 82 % TRA 3- 0511 TRA 3- 0519 5 VDC ±10% TRA 3- 1211 TRA 3- 1219 TRA 3- 2419 12 VDC ±10% 24 VDC ±10% Output voltage 9 VDC 333 mA 4.8 % 85 % TRA 3- 2412 12 VDC 250 mA 4.3 % 85.5 % TRA 3- 2413 15 VDC 200 mA 3.5 % 85 % http://www.tracopower.com Page 1 of 3 PDF
Документация на TRA 3-0511 

datasheet

Дата модификации: 06.10.2021

Размер: 247.5 Кб

3 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TRA 3 Series, 3 Watt CB Scheme Features ◆ Semi-regulated output (load) ◆ Highest power density 3W SIP-Converter ◆ Industry standard pinout ◆ High efficiency up to 89% ◆ I/O isolation voltage 1000 VDC ◆ Operating temperature range UL 60950-1 –40°C to +85°C ◆ 3-year product warranty The TRA 3 series are miniature, I/O-isolated 3W DC/DC-converters with a semi load regulation. They are the ideal solution to power drivers and circuits where unregulated DC/DC converters do not meet the input voltage range at load change. Models Order code Input voltage Output current max. Load regulation max. Efficiency typ. 5 VDC 600 mA 8% 83 % 9 VDC 333 mA 7% 87 % TRA 3- 0512 12 VDC 250 mA 7% 85 % TRA 3- 0513 15 VDC 200 mA 6% 87 % 5 VDC 600 mA 6% 84 % 9 VDC 333 mA 5% 87 % TRA 3- 1212 12 VDC 250 mA 4.5 % 88 % TRA 1- 1213 15 VDC 200 mA 4% 89 % TRA 3- 2411 5 VDC 600 mA 6% 82 % TRA 3- 0511 TRA 3- 0519 5 VDC ±10% TRA 3- 1211 TRA 3- 1219 TRA 3- 2419 12 VDC ±10% 24 VDC ±10% Output voltage 9 VDC 333 mA 5% 85 % TRA 3- 2412 12 VDC 250 mA 4.5 % 85 % TRA 3- 2413 15 VDC 200 mA 3.5 % 85 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TRA3 

Дата модификации: 27.09.2013

Размер: 274 Кб

3 стр.

    Товары серии TRA3

    Наименование i Упаковка P вых Каналов U вх Выход Возможности U вх ном. U1 I1 КПД Размер T раб
    TRA 3-0511 (TRACO)
     
     
    		 в линейках 10 шт 19.5×7.6×10.2 мм
    TRA 3-0512 (TRACO)
     
     
    		 в линейках 10 шт — —
    TRA 3-0513 (TRACO)
     
     
    		 в линейках 10 шт — —
    TRA 3-0519 (TRACO)
     
     
    		 1 шт — — —
    TRA 3-1211 (TRACO)
     
     
    		 — — —
    TRA 3-1212 (TRACO)
     
     
    		 — — —
    TRA 3-1213 (TRACO)
     
     
    		 — —
    TRA 3-1219 (TRACO)
     
     
    		 — — —
    TRA 3-2411 (TRACO)
     
     
    		 1 шт — — —
    TRA 3-2412 (TRACO)
     
     
    		 — —
    TRA 3-2413 (TRACO)
     
     
    		 — — —
    TRA 3-2419 (TRACO)
     
     
    		 10 шт — — —
    TRA1-2423 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 2 Output, 1W, Hybrid — 19.5×6.1×10.2 мм
    TRA3-0511 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-0512 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-0513 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-0519 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 2.997W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-1211 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-1212 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-1213 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-1219 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 2.997W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-2411 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-2412 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-2413 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid — 19.5×7.6×10.45 мм
    TRA3-2419 (TRACO)
     
     
    		 DC-DC Regulated Power Supply Module, 1 Output, 2.997W, Hybrid — 19.5×7.6×10.45 мм