Серия DC-DC модульных преобразователей TVN 5

TRACO

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Возможности
Комплекс защит короткого замыкания, перегрузки, перенапряжения
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 32×20×10.2 мм
Рабочая температура

Документация на серию TVN 5

DC/DC Converter • • • • • • • TVN 5WI Series, 5 Watt Ultra low ripple and noise 10mVp-p typ. DIP-24 Package Regulated I/O isolation 1600 VDC functional Operating temperature range -40 to +90°C Remote On/Off 3-year product warranty The TVN 5WI series is a ultra low ripple and noise 5 Watt DC/DC converter featuring wide 4:1 input voltage ranges in a DIP-24 package. Standard features include remote On/Off, over voltage protection, under voltage lockout and short circuit protection. High efficiency across load range and low input current characteristics at no load make these converters the ideal solution for many operations which require low ripple and noise characteristics. Models Order Code Input Voltage Range TVN 5-0910WI TVN 5-0911WI TVN 5-0912WI TVN 5-0913WI TVN 5-0915WI TVN 5-0921WI TVN 5-0922WI TVN 5-0923WI TVN 5-0925WI TVN 5-2410WI TVN 5-2411WI TVN 5-2412WI TVN 5-2413WI TVN 5-2415WI TVN 5-2421WI TVN 5-2422WI TVN 5-2423WI TVN 5-2425WI TVN 5-4810WI TVN 5-4811WI TVN 5-4812WI TVN 5-4813WI TVN 5-4815WI TVN 5-4821WI TVN 5-4822WI TVN 5-4823WI TVN 5-4825WI www.tracopower.com 4.5 - 12 VDC (9 VDC nom.) 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC +24 VDC 1'515 mA 1'000 mA 416 mA 333 mA 208 mA 500 mA 208 mA 166 mA 104 mA 1'515 mA 1'000 mA 416 mA 333 mA 208 mA 500 mA 208 mA 166 mA 104 mA 1'515 mA 1'000 mA 416 mA 333 mA 208 mA 500 mA 208 mA 166 mA 104 mA March 18, 2021 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC –24 VDC 500 mA 208 mA 166 mA 104 mA –5 VDC –12 VDC –15 VDC –24 VDC 500 mA 208 mA 166 mA 104 mA –5 VDC –12 VDC –15 VDC –24 VDC 500 mA 208 mA 166 mA 104 mA typ. 79 % 82 % 87 % 87 % 88 % 84 % 85 % 86 % 87 % 81 % 83 % 88 % 88 % 89 % 84 % 85 % 86 % 87 % 80 % 83 % 86 % 87 % 88 % 83 % 85 % 86 % 87 % Page 1 / 4 PDF
Документация на TVN 5-2411WI 

TVN 5WI Datasheet 3 Watt DC/DC convertr, industrial, 4:1 input, ultra low ripple & noise, 1600 VC isolation, encapsulated, metal case, DIP-24 package

Дата модификации: 18.03.2021

Размер: 856.5 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TVN 5WI Series, 5 Watt • Ultra low ripple and noise 10 mVp-p typ. • 6-side shielded DIP-24 metal package • Input filter to mee EN 55032, class B • Ultra wide 4:1 input voltage range 4.5-12, 9-36, 18-75 VDC • Operating temperature range –40°C to +85°C without derating • Undervoltage lockout • I/O isolation 1600 VDC • Adjustable output voltage • No minimum load required • Remote On/Off • 3-year product warranty The TVN 5WI series is a ultra low ripple and noise 5 Watt dc/dc converter in six side shielded metal package. The conducted noise complies with EN 55032 class B and makes this converters the ideal solution for audio, measurement and detection circuits. Standard features include remote On/Off, over voltage protection, under voltage shut down and short circuit protection. Models Order code TVN 5-0910WI TVN 5-0911WI TVN 5-0912WI TVN 5-0913WI TVN 5-0915WI TVN 5-0921WI TVN 5-0922WI TVN 5-0923WI TVN 5-0925WI TVN 5-2410WI TVN 5-2411WI Models TVN 5-2412WI TVN 5-2413WI TVN 5-2415WI TVN 5-2421WI TVN 5-2422WI TVN 5-2423WI TVN 5-2425WI TVN 5-4810WI TVN 5-4811WI TVN 5-4812WI TVN 5-4813WI TVN 5-4815WI TVN 5-4821WI TVN 5-4822WI TVN 5-4823WI TVN 5-4825WI http://www.tracopower.com Input voltage 4.5 – 12 VDC (9 VDC nominal) 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (9 VDC nominal) Output voltage 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC ±24 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC ±24 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5.0 VDC ±12 VDC ±15 VDC ±24 VDC Output current max. Efficiency typ. 1515 mA 1000 mA 416 mA 333 mA 208 mA ±500 mA ±208 mA ±166 mA ±104 mA 1515 mA 1000 mA 416 mA 333 mA 208 mA ±500 mA ±208 mA ±166 mA ±104 mA 1515 mA 1000 mA 416 mA 333 mA 208 mA ±500 mA ±208 mA ±166 mA ±104 mA 79 % 82 % 87 % 87 % 88 % 84 % 85 % 86 % 87 % 81 % 83 % 88 % 88 % 89 % 84 % 85 % 86 % 87 % 80 % 83 % 86 % 87 % 88 % 83 % 85 % 86 % 87 % Page 1 of 4 PDF
Документация на серию TVN 5 

datasheet

Дата модификации: 08.06.2017

Размер: 259.1 Кб

4 стр.

    Товары серии TVN 5

    Наименование i Упаковка Каналов U вх Выход U вх ном. U1 I1 КПД U2 I2
    TVN 5-2411WI (TRACO)
     
    		в линейках 10 шт — —
    TVN 5-2412WI (TRACO)
     
    		в линейках 10 шт — —
    TVN 5-2413WI (TRACO)
     
    		3 шт — —
    TVN 5-2415WI (TRACO)
     
    		1 шт — —
    TVN 5-2421WI (TRACO)
     
    		1 шт
    TVN 5-2422WI (TRACO)
     
    		в линейках 10 шт
    TVN 5-2425WI (TRACO)
     
    		1 шт
    TVN 5-4810WI (TRACO)
     
    		3 шт — —
    TVN 5-4811WI (TRACO)
     
    		1 шт — —
    TVN 5-4815WI (TRACO)
     
    		— —
    TVN 5-4821WI (TRACO)
     
    		— —

    TVN 5 публикации

    18 февраля 2020
    новость

    Компоненты для разработки AC/DC источников питания и DC/DC преобразователей. Интерфейсные изолированные модули RS485/CAN и их особенности (материалы вебинара)

    Программа показатьсвернуть На вебинаре будут рассмотрены ШИМ–контроллеры для источников питания обратноходовой (Flyback) топологии, микросхемы запуска и трансформаторы компании MORNSUN для разработки несложных AC/DC преобразователей в... ...читать