Серия защитных диодов 1.5KE30

Taiwan Semiconductor

Общие характеристики

 Раздел Защитные диоды
Корпус DO201
Рассеиваемая мощность
Пиковая рассеиваемая мощность
Рабочее напряжение
Напряжение ограничения (номинальное)
Напряжение ограничения (диапазон)
Максимальное импульсное напряжение
Ток утечки при рабочем напряжении
Максимальный импульсный ток
Количество линий ограничения

Документация на серию 1.5KE30

1.5KE SERIES Taiwan Semiconductor 1500W, 6.8V - 440V Transient Voltage Suppressor FEATURES ● ● ● ● ● ● ● ● ● KEY PARAMETERS AEC-Q101 qualified available Excellent clamping capability Low dynamic impedance 1500W surge capability at 10/1000μs waveform Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional Typical IR less than 1μA above 10V Meets ISO 7637-2 (Pulse 1/2a/2b/3a/3b) RoHS Compliant Halogen-free according to IEC 61249-2-21 PARAMETER VALUE UNIT VWM 5.5 - 376 V VBR (uni - directional) 6.12 - 462 V VBR (bi - directional) 6.12 - 462 V PPK 1500 W TJ MAX 175 Package DO-201 APPLICATIONS ● Protect sensitive circuit from damage by high voltage transients ● Lighting, ESD transient voltage protection of IC, system ● Inductive switching load protection of IC, system ● Electrical Fast Transient Immunity protection of IC, system MECHANICAL DATA ● ● ● ● ● ● Case: DO-201 Molding compound meets UL 94V-0 flammability rating Terminal: Pure tin plated leads, solderable per J-STD-002 Meet JESD 201 class 2 whisker test Polarity: As marked Weight: 0.090g (approximately) DO-201 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT PPK 1500 W PD 5 W IFSM 200 A Forward Voltage @ IF = 50A for Uni-directional only VF 3.5 / 5.0 V Junction temperature TJ - 55 to +175 °C Storage temperature TSTG - 55 to +175 Notes: 1. Non-repetitive Current Pulse Per Fig.3 and Derated above TA = 25°C Per Fig.2 2. Mounted on Copper Pad Area of 0.6" x 0.6" (16mm x 16mm) 3. VF = 3.5V for Devices of VBR ≦ 200V and VF = 5.0V Max. for Devices VBR > 200V °C (1) Peak power dissipation at TA = 25°C, Tp = 1ms Steady state power dissipation at TL = 75°C (2) lead lengths .375", 9.5mm Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load for Uni-directional only (3) Devices for Bipolar Applications 1. For bidirectional use C or CA suffix for types 1.5KE6.8 - Types 1.5KE440 2. Electrical characteristics apply in both directions 1 Version: O2104 PDF
Документация на 1.5KE100A 

Дата модификации: 16.04.2021

Размер: 431.6 Кб

8 стр.

    Товары серии 1.5KE30

    Наименование i Упаковка Тип
    1.5KE30A (TSC)
     
     
    		 1250 шт
    1.5KE30AR0 (TSC)
     
    1.5KE30CA (TSC)
     
    		Защитный диод - 1250 шт
    1.5KE30CAHA0G (TSC)
     
    		500 шт
    1.5KE30CAR0 (TSC)
     
    1.5KE30CAR0G (TSC)