TPT9H221L1-SO1R

3PEAK
TPT9H221 Multipoint-LVDS Line Driver and Receiver Features Description  Exceeds the M-LVDS Standard TIA/EIA-899 The TPT9H221 is a 3.3V Multipoint-Low-Voltage for Multipoint Data Interchange Differential (M-LVDS) line driver and receiver, which Low-Voltage Differential 30-Ω to 55-Ω Line can operate at signaling rates up to 200 Mbps. Driver Drivers and Receivers for Signaling Rates, o...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOP-8
Количество каналов передачи данных
Количество каналов приёма данных
Максимальная скорость передачи данных
Номинальное напряжение
Рабочая температура
Примечания Multipoint-LVDS Line Driver and Receiver
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
TPT9H221 Multipoint-LVDS Line Driver and Receiver Features Description  Exceeds the M-LVDS Standard TIA/EIA-899 The TPT9H221 is a 3.3V Multipoint-Low-Voltage for Multipoint Data Interchange Differential (M-LVDS) line driver and receiver, which Low-Voltage Differential 30-Ω to 55-Ω Line can operate at signaling rates up to 200 Mbps. Driver Drivers and Receivers for Signaling Rates, outputs and receiver inputs are protected against Up to 200 Mbps ±8kV ESD strikes without latch-up. The driver output Type-2 Receivers Provide an Offset (100 mV) has been designed to support multipoint buses   Threshold to Detect Open-Circuit and Idle- presenting loads as low as 30 Ω, and incorporates Bus controlled transition times to allow for stubs off of the backbone transmission line.  Conditions  -1 V to 3.4 V Common-Mode Voltage Range  Allows Data Transfer With 2 V of Ground common-mode voltage range of -1 V to 3.4 V. Type-2 Noise receiver includes an offset threshold to provide a Bus Pins High Impedance When Disabled or known output state under open-circuit fail-safe, idle- VCC ≤ 1.5 V bus fail-safe. The device is characterized for  Bus-Pin Protection: ±8 kV HBM model operation from –40°C to 85°C. The device is available  –40°C to 85°C Operation Temperature Range as half-duplex in an 8-lead SOP package.  Applications  The TPT9H221 is Type-2 receiver that detect the bus state with a differential input of 50 mV over a Simplified Schematic Backplane Multipoint Data/Clock Transmission DE  Cellular Base Stations  Network Switches and Routers  Industrial Control  Communication Infrastructure 3 4 D 2 RE 1 R www.3peakic.com.cn 1 / 17 Rev. 0 6 A 7 B PDF
Документация на серию TPT9H221 

Дата модификации: 31.08.2022

Размер: 1.52 Мб

17 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS1023 (RUIMENG)