TEM6640AN

Mornsun
Signal conditioning modules TEMxxxxAN Series FEATURES Signal conditioning modules  Two-port isolation (signal input and signal output)  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage 2kVAC for 60s  Extremely low temperature coefficient of ≤50PPM/℃  Industrial grade operating temperature range from -40℃ to +85℃  High reliability, MTBF >5...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Signal conditioning modules TEMxxxxAN Series FEATURES Signal conditioning modules  Two-port isolation (signal input and signal output)  High accuracy of 0.1% Full Scale  High linearity of 0.1% Full Scale  Isolation test voltage 2kVAC for 60s  Extremely low temperature coefficient of ≤50PPM/℃  Industrial grade operating temperature range from -40℃ to +85℃  High reliability, MTBF >500,000 hours  Low ripple & noise: ≤35mVpp, 20MHz  ESD protection to IEC/EN61000-4-2, Contact ±4kV with performance Criteria B  Small footprint DIP Package 26 x 9.5 x 12.5mm  Signal load capacity ≥2kΩ (@ signal output 10V Max.) RoHS EN60950-1 TEMxxxxAN series are analog signal isolation modules with incoming millivolt positive/negative signal input and transformed positive signal output. They are equipped with an efficient built-in micro-power source that supplies additionally power to the internal input signal circuitry. The adopted electromagnetic isolation technology has a better performance, a much higher accuracy and a lower temperature drift in comparison with photo/opto-coupler isolators. This type of product has in addition to low temperature drift and high linearity, a low power consumption and low ripple & noise. They have a two-terminal isolation from signal input to signal output/power input. Selection Guide Certification EN Part No. Power Supply Input Typ. (VDC) Input Signal Output Signal Isolated Power Output (VDC) TEM5630AN TEM6650AN 24VDC ±75mV 0-5VDC None 12VDC ±100mV 0-5VDC None TEM6640AN 15VDC ±100mV 0-5VDC None Input Specifications Item Operating Conditions Input voltage Power Input Signal Input Input power Signal full load Min. Typ. Max. Unit Typ.-5% Typ. Typ.+5% VDC -- -- 1.0 W Power supply protection Input reverse polarity protection Input signal See selection guide Input impedance in case of max. input of voltage signal Over range 10 -- -- MΩ -10 -- +10 V Min. Typ. Max. Unit Output Specifications Item Operating Conditions Output Signal Signal Output See selection guide Load Capacity Voltage output 2 -- -- KΩ Ripple & Noise Bandwidth 20MHz -- -- 35 mVp-p Transmission Specifications Item Min. Typ. Max. Unit Zero Offset -0.1%FS -- +0.1%FS -- Signal Precision -0.1%FS -- +0.1%FS -- -- -- 50 PPM/℃ Bandwidth 2 -- -- KHz Response Time -- -- 1 ms Temperature Coefficient Operating Conditions Operating temperature range from -40 ~ +85℃ 2021.09.28-A/4 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на TEM6650AN 

TEMxxxxAN Keywords:

Дата модификации: 28.12.2021

Размер: 671.6 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    T1100L-F (MORNSUN)