PT-65B

MEAN WELL
AC/DC преобразователь: Открытый; 65 Вт; Выходов 3: 5В/7А, 12В/3.2А, -12В/0.7А; Вход: 90...264VAC / 120...370VDC; 0...45°C
развернуть ▼ свернуть ▲
Фотография серии PT-65
Чертеж серии PT-65
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 127×76×42 мм
Рабочая температура
Примечание AC-DC Regulated Power Supply Module, 3 Output, 63.5W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ RPT-65F (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 65 Вт; Выход: 12 В, 5 В, -12 В; U1: 12 В; I1: 0.... компактный дизайн, базовая модель КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ RPT-75B (MW)
 
— 1 шт AC/DC преобразователь: открытый; 75 Вт; выходов 3: 5В @ 4.4А, 12В @ 4А, -12В @ 1А; вход... КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module

Файлы 2

показать свернуть
P T- 6 5 65W Triple Output Switching Power Supply series User’s Manual ■ Features : Universal AC input/Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT UL62368-1 PT-65A PT-65B BS EN/EN62368-1 TPTC004 PT-65C IEC62368-1 PT-65D OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V RATED CURRENT 5.5A 2.5A 0.5A 5.5A 2.5A 0.5A 5.5A 2A 0.5A 4A 2A 1A CURRENT RANGE 0.4 ~ 7A 0.2 ~ 3.2A 0 ~ 0.7A 0.4 ~ 7A 0.2 ~ 3.2A 0 ~ 0.7A 0.4 ~ 7A 0.2 ~ 2.6A 0 ~ 0.7A 0.5 ~ 5A 0.2 ~ 4A 0.2 ~ 1.3A RATED POWER 60W OUTPUT POWER (max.) Rated output power for convection; 72W with 18CFM min. Forced air 63.5W 65W 68W RIPPLE & NOISE (max.) Note.2 50mVp-p 120mVp-p 50mVp-p 50mVp-p 120mVp-p 100mVp-p 50mVp-p 120mVp-p 100mVp-p 50mVp-p 100mVp-p 200mVp-p VOLTAGE ADJ. RANGE INPUT CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±4.0% ±7.0% LINE REGULATION ±5.0% ±4.0% ±7.0% ±5.0% ±4.0% ±7.0% ±5.0% ±4.0% ±6.0% ±6.0% ±1.0% ±2.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±2.0% ±3.0% LOAD REGULATION ±3.0% ±4.0% ±1.0% ±3.0% ±4.0% ±1.0% ±3.0% ±4.0% ±1.0% ±2.0% ±5.0% ±5.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 76% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC (Note 4) 77% 79% COLD START 20A/115VAC <0.75mA 40A/230VAC 73 ~ 95W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. 5.75 ~ 6.75VDC on CH1 74.8 ~ 98.6W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 277.2K hrs min. MIL-HDBK-217F (25℃) DIMENSION PACKING NOTE 77% 0.9A/230VAC ISOLATION RESISTANCE EMC EMISSION MTBF OTHERS 127 ~370VDC 127*76*42mm (L*W*H) 0.25Kg; 54pcs/15.9Kg/1.28CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PT-65-SPEC 2021-09-15 PDF
Документация на PT-65D 

PT-65-20210915.cdr

Дата модификации: 02.12.2021

Размер: 112.6 Кб

2 стр.

P T- 6 5 65W Triple Output Switching Power Supply series Features : Universal AC input/Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL OUTPUT PT-65A CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V RATED CURRENT 5.5A 2.5A 0.5A 5.5A 2.5A 0.5A 5.5A 2A 0.5A 4A 2A 1A CURRENT RANGE 0.4 ~ 7A 0.2 ~ 3.2A 0 ~ 0.7A 0.4 ~ 7A 0.2 ~ 3.2A 0 ~ 0.7A 0.4 ~ 7A 0.2 ~ 2.6A 0 ~ 0.7A 0.5 ~ 5A 0.2 ~ 4A 0.2 ~ 1.3A RATED POWER 60W OUTPUT POWER (max.) Rated output power for convection; 72W with 18CFM min. Forced air 63.5W 65W 68W RIPPLE & NOISE (max.) Note.2 50mVp-p 120mVp-p 50mVp-p 50mVp-p 120mVp-p 100mVp-p 50mVp-p 120mVp-p 100mVp-p 50mVp-p 100mVp-p 200mVp-p CH1:4.75 ~ 5.5V 4.0% 7.0% 5.0% 4.0% 7.0% 5.0% 4.0% 7.0% 5.0% 4.0% 6.0% 6.0% LINE REGULATION 1.0% 2.0% 1.0% 1.0% 2.0% 1.0% 1.0% 2.0% 1.0% 1.0% 2.0% 3.0% LOAD REGULATION 3.0% 4.0% 1.0% 3.0% 4.0% 1.0% 3.0% 4.0% 1.0% 2.0% 5.0% 5.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 76% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT 127 ~370VDC 77% 77% 79% 0.9A/230VAC COLD START 20A/115VAC <0.75mA 40A/230VAC 73 ~ 95W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. 5.75 ~ 6.75VDC on CH1 74.8 ~ 98.6W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 ) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL1950, TUV EN60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 277.2K hrs min. MIL-HDBK-217F (25 ) DIMENSION 127*76*42mm (L*W*H) 0.25Kg; 54pcs/15.9Kg/1.35CUFT PACKING NOTE PT-65D CH2 VOLTAGE ADJ. RANGE OTHERS PT-65C CH1 VOLTAGE TOLERANCE Note.3 INPUT PT-65B OUTPUT NUMBER 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:PT-65-SPEC 2006-12-19 PDF
Документация на серию PT-65 

PT-65.cdr

Дата модификации: 02.01.2007

Размер: 425.8 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155C (MW)