NCA1042-DSPR

NCA1042 High-speed CAN Transceiver with standby mode Datasheet (EN) 1.1 Product Overview The NCA1042 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus, which can support at least 110 CAN nodes. The NCA1042 implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SA...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Корпус SO-8 SOIC8
Кол-во каналов передачи данных
Кратковременная импульсная защита ±
Диапазон питающих напряжений
Ток собственного потребления
Совместимый по выводам аналог
Диапазон рабочих температур
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 6

показать свернуть
Тип Наименование Корпус Упаковка i Каналов Защита U пит Iпотр Аналог T раб Примечание Карточка
товара
P= NCA1042A-Q1SPR (NOVOSENS)
 
 
±
P= TPT1042V-SO1R (3PEAK)
 
SO-8 SOIC8
 
P= TPT1042V-SO1R-S (3PEAK)
 
SO-8 SOIC8 в ленте 4000 шт
 
F~ CA-IF1042VS-Q1 (CHIPANLG)
 
SO-8 SOIC8 в ленте 2500 шт ±
F~ CA-IF1044VS-Q1 (CHIPANLG)
 
SO-8 SOIC8
 
±
F~ CA-IF1042LVS-Q1 (CHIPANLG)
 
SO-8 SOIC8
 

Файлы 1

показать свернуть
NCA1042 High-speed CAN Transceiver with standby mode Datasheet (EN) 1.1 Product Overview The NCA1042 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus, which can support at least 110 CAN nodes. The NCA1042 implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. The NCA1042 provides thermal protection and transmit data dominant time out function. Key Features  Fully compatible with the ISO11898-2 standard Applications  5Mbps operation in highly loaded CAN networks down to 10 kbps networks using TXD DTO  Industrial automation, control, sensors, and drive systems  Building, security, and climate control automation  CAN bus standards such as CANopen、DeviceNet、 NMEA2000、ARNIC825、ISO11783 and CANaerospace Device Information Part Number NCA1042-DSPR Package SOP8 Body Size 4.90mm × 3.90mm  I/O voltage range supports 3.3V and 5V MCU  Power supply voltage Functional Block Diagrams VIO: 3V to 5.5V VCC: 4.5V to 5.5V  Bus fault protection of -70V to +70V  Transmit data (TXD) dominant time out function  Bus dominant time out function in standby mode  Very low-current Standby mode with wake-up capability Figure 1. NCA1042 Block Diagram  Over current and over temperature protection  Date rate: up to 5Mbps  Low loop delay: <250ns  Operation temperature: -40℃~125℃  RoHS-compliant packages: SOP8 Copyright © 2021, NOVOSENSE Page 1 PDF
Документация на NCA1042-DSPR 

Copyright © 2019, NOVOSENSE Keywords:

Дата модификации: 19.07.2021

Размер: 1.52 Мб

16 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.