SA59401FBP

Silergy
Application Note: SA59401 Bidirectional, Zero-Drift, High-accuracy Analog-to-Digital Converter With Internal Reference and Temperature Sensor Advance Design Specification General Description Features The SA59401 is a precision, low power, analog-todigital converter (ADC) that provides all features necessary to measure the most common sensor signals in a MSOP-10 package. • Wide Supply Range:...
развернуть ▼ свернуть ▲
Схема включения SA59401FBP
Внешний вид SA59401FBP
Внешний вид SA59401FBP
 

Технические характеристики

показать свернуть
Корпус MSOP10
Разрядность АЦП
Кол-во измерительных каналов
Частота преобразования
Тип аналого-цифрового преобразователя
Цифровой интерфейс
Конфигурация аналогового входа
Эффективная разрядность АЦП
Конфигурация источника опорного напряжения
Диапазон питающих напряжений аналоговой части
Диапазон питающих напряжений цифровой части
Диапазон рабочих температур
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Application Note: SA59401 Bidirectional, Zero-Drift, High-accuracy Analog-to-Digital Converter With Internal Reference and Temperature Sensor Advance Design Specification General Description Features The SA59401 is a precision, low power, analog-todigital converter (ADC) that provides all features necessary to measure the most common sensor signals in a MSOP-10 package. • Wide Supply Range: 2.7V to 5.5V The SA59401 integrates a 16-bit high precision ADC, oscillator and high-accuracy temperature sensor. SA59401 can perform conversions at data rates up to 890 samples per second (SPS). The input ranges from -128 mV to +127.996mV. The SA59401 integrates an input multiplexer (MUX) allows to measure two differential or four single-ended inputs. An integrated high-accuracy temperature sensor can be used for system-level temperature monitoring or cold-junction compensation for thermocouples. These features, along with a wide power supply range from 2.7 V to 5.5 V, make the SA59401 ideally suited for power- and spaceconstrained, sensor-measurement applications. The SA59401 operates either in continuousconversion mode, or in a single-shot mode that automatically powers down after a conversion. Singleshot mode significantly reduces current consumption during idle periods. Data are transferred through a serial peripheral interface (SPI™). The SA59401 is specified from –40°C to +125°C. • Low Current Consumption: ➢ Continuous Mode: 350μA ➢ Single-Shot Mode: Automatic Power Down • Programmable Data Rate: 8 SPS to 890 SPS • Single-Cycle Settling • Internal Low-Drift Voltage Reference • Internal Temperature Sensor: ➢ 1.5°C (Maximum) Error: 0°C to 70°C • Internal Oscillator • Four Single-Ended or Two Differential Inputs • MSOP-10 Package Applications • Temperature Measurement: ➢ Thermocouple Measurement ➢ Cold-Junction Compensation ➢ Thermistor Measurement Ordering Information • Portable Instrumentation SA59401 □(□□□ ) • Factory Automation and Process Controls Package Code Optional Spec Code Ordering Number SA59401FBP AN_SA59401 Rev. 0.0 © 2021 Silergy Corp. Package type MSOP10 Note -- 1 PDF
Документация на SA59401FBP 

IOS Check List

Дата модификации: 28.12.2023

Размер: 1.51 Мб

14 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS1100 (RUIMENG)