TP1511-TR

3PEAK
TP1511/TP1511N/TP1512/TP1514 Stable 150kHz, 4μA, Rail-to-Rail, EveryCapTM Op Amps Features Description  Stable 150kHz GBWP Over Temperature Range  Stable 150kHz GBWP in VCM from 0-V to VDD  0.09V/μs Slew Rate  Only 4μA of Supply Current per Amplifier  Shutdown Current: 0.1μA (TP1511N)  Up to 55 Years Operation from 2 AA Alkaline-Cells  Unity Gain Stable for ANY CAPACITIVE ...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOT235
Тип ОУ Маломощный операционный усилитель
Техническая особенность ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
TP1511/TP1511N/TP1512/TP1514 Stable 150kHz, 4μA, Rail-to-Rail, EveryCapTM Op Amps Features Description  Stable 150kHz GBWP Over Temperature Range  Stable 150kHz GBWP in VCM from 0-V to VDD  0.09V/μs Slew Rate  Only 4μA of Supply Current per Amplifier  Shutdown Current: 0.1μA (TP1511N)  Up to 55 Years Operation from 2 AA Alkaline-Cells  Unity Gain Stable for ANY CAPACITIVE Load  Offset Voltage: 3.0mV Maximum  Offset Voltage Temperature Drift: 0.6 μV/°C  Input Bias Current: 1pA Typical  High CMRR/PSRR: 110dB  No Phase Reversal for Overdriven Inputs  Beyond the Rails Input Common-Mode Range  Outputs Swing to within 5mV of Each Rail  Single +2.1V to +6.0V Supply Voltage Range  –40°C to 125°C Operation Range  ESD Rating: Robust 8KV – HBM, 2KV – CDM and 500V – MM  Green, Popular Type Package Applications  Sensor Conditioning  Battery Current Sensing  IR thermometers  Digital Scales  Automotive Keyless Entry  Toll Booth Tags  Data Acquisition Equipment  Battery or Solar Powered Systems  Active Filters, ASIC Input or Output Amplifier  Portable Instruments TP151x series are CMOS single/dual/quad op-amps with low offset, stable high frequency response, low power, low supply voltage, and rail-to-rail inputs and outputs. They incorporate 3PEAK’s proprietary and patented design techniques to achieve best in-class performance among all micro-power CMOS amplifiers in its power class. The TP151x family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve input/output range and performance. TP151x are unity gain stable with Any Capacitive load with a constant 150kHz GBWP, 0.09V/μs slew rate while consuming only 4μA of quiescent current per amplifier. Analog trim and calibration routine reduce input offset voltage to below 3.0mV, and proprietary precision temperature compensation technique makes offset voltage temperature drift at 0.6μV/°C. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. This combination of features makes the TP151x OPA ideal choices for battery-powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp. Battery Current Monitor, consumer devices, handheld instrumentation, Remote battery-powered sensors, hazard detection (for example, smoke, fire, and gas), and patient monitors can benefit from the features of the TP151x op-amps. For applications that require power-down, the TP1511N in popular type packages has a low-power shutdown mode that reduces supply current to less than 0.1μA, and forces the output into a high-impedance state. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. VDD R4 R1 ISENSE LOAD R3 IN+ VOUT TP1511 IN- R2 RSENSE Figure 1. TP1511 in Battery Monitoring Application www.3peakic.com.cn REV A.2 1 PDF
Документация на семейство TP1511_TP1512_TP1514 

Features

Дата модификации: 02.03.2022

Размер: 1.54 Мб

18 стр.

TP1511/TP1511N/TP1512/TP1514 Stable 150kHz, 4μA, Rail-to-Rail, EveryCapTM Op Amps Features Description  Stable 150kHz GBWP Over Temperature Range  Stable 150kHz GBWP in VCM from 0-V to VDD  0.09V/μs Slew Rate  Only 4μA of Supply Current per Amplifier  Shutdown Current: 0.1μA (TP1511N)  Up to 55 Years Operation from 2 AA Alkaline-Cells  Unity Gain Stable for ANY CAPACITIVE Load  Offset Voltage: 3.0mV Maximum  Offset Voltage Temperature Drift: 0.6 μV/°C  Input Bias Current: 1pA Typical  High CMRR/PSRR: 110dB  No Phase Reversal for Overdriven Inputs  Beyond the Rails Input Common-Mode Range  Outputs Swing to within 5mV of Each Rail  Single +2.1V to +6.0V Supply Voltage Range  –40°C to 125°C Operation Range  ESD Rating: Robust 8KV – HBM, 2KV – CDM and 500V – MM  Green, Popular Type Package Applications  Sensor Conditioning  Battery Current Sensing  IR thermometers  Digital Scales  Automotive Keyless Entry  Toll Booth Tags  Data Acquisition Equipment  Battery or Solar Powered Systems  Active Filters, ASIC Input or Output Amplifier  Portable Instruments TP151x series are CMOS single/dual/quad op-amps with low offset, stable high frequency response, low power, low supply voltage, and rail-to-rail inputs and outputs. They incorporate 3PEAK’s proprietary and patented design techniques to achieve best in-class performance among all micro-power CMOS amplifiers in its power class. The TP151x family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve input/output range and performance. TP151x are unity gain stable with Any Capacitive load with a constant 150kHz GBWP, 0.09V/μs slew rate while consuming only 4μA of quiescent current per amplifier. Analog trim and calibration routine reduce input offset voltage to below 3.0mV, and proprietary precision temperature compensation technique makes offset voltage temperature drift at 0.6μV/°C. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. This combination of features makes the TP151x OPA ideal choices for battery-powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp. Battery Current Monitor, consumer devices, handheld instrumentation, Remote battery-powered sensors, hazard detection (for example, smoke, fire, and gas), and patient monitors can benefit from the features of the TP151x op-amps. For applications that require power-down, the TP1511N in popular type packages has a low-power shutdown mode that reduces supply current to less than 0.1μA, and forces the output into a high-impedance state. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. VDD R4 R1 ISENSE LOAD R3 IN+ VOUT TP1511 IN- R2 RSENSE Figure 1. TP1511 in Battery Monitoring Application www.3peakic.com.cn REV A 1 PDF
Документация на TP1511-TR 

Features

Дата модификации: 04.08.2017

Размер: 1.47 Мб

18 стр.

    Публикации 1

    показать свернуть
    19 октября 2022
    новость

    3PEAK – надежный производитель инновационной аналоговой продукции

    В линейке поставок КОМПЭЛ пополнение – продукция компании 3PEAK, являющейся одним из самых известных азиатских производителей электронных компонентов широкого спектра задач и областей применения. Основанный в 2012 году 3PEAK был включен в список... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    JRC4558D (YOUTAI)