TP2012-SR

3PEAK
Интегральная микросхема двухканального компаратора, Push-Pull выходом, напряжением питания 1.6...5.5 В, током собственного потребления 300 нА, рабочей температурой -40...85 °C, в корпусе SO-8 (SOIC8), производства 3PEAK (3PEAK)
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SO-8 SOIC8
Кол-во компараторов в корпусе
Тип выхода
Совместимость с логикой
Диапазон напряжений питания
Ток собственного потребления
Диапазон рабочих температур
Примечание Ultra-Low Power 300nA, 1.6V, RRIO, Push-Pull Output Comparator
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
3PEAK TP2011/TP2012/TP2014 Ultra-Low Power 200nA, 1.6V, RRIO, Push-Pull Output Comparators Features Descriptions  Ultra-Low Supply Current: 200 nA per channel  Fast Response Time: 13 μs Propagation Delay, with 100 mV Overdrive  Internal Hysteresis for Clean Switching  Offset Voltage: ± 12.0 mV Maximum  Input Bias Current: 6 pA Typical  No Phase Reversal for Overdriven Inputs  Low Supply Voltage: 1.6V to 5.5V Applications  Battery Monitoring / Management  Alarm and Monitoring Circuits  Peak and Zero-crossing Detectors  Threshold Detectors/Discriminators  Sensing at Ground or Supply Line  Logic Level Shifting or Translation  Window Comparators  Oscillators and RC Timers  Mobile Communications and Notebooks  Ultra-Low-Power Systems The TP201x family of push-pull output comparators features the world-class lowest nano-power (250nA maximum) and fast 13μs response time capability, allowing operation from 1.6V to 5.5V. Input commonmode range to supply rails makes the TP201x an ideal choice for power-sensitive, low-voltage (2-cell) applications. The TP201x push-pull output supports rail-to-rail output swing and interfaces with TTL /CMOS logic, and are capable of driving heavy DC or capacitive loads. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The output limits supply current surges and dynamic power consumption while switching. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. Micro-sized packages provide options for portable and space-restricted applications. The single (TP2011) is available in SC70-5, and the dual (TP2012) is available in SOT23-8. The related TP2015/6/8 family of comparators from 3PEAK has an open-drain output. Used with a pull-up resistor, these devices can be used as level-shifters for any desired voltage up to 10V and in wired-OR logic. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK Incorporated. All other trademarks are the property of their respective owners. VDD R3 R1 TP201x Vi Vo R2 Typical Application of TP201x Comparators www.3peakic.com.cn REV1.9 1 PDF
Документация на семейство TP2011_TP2012_TP2014 

Features

Дата модификации: 28.04.2022

Размер: 1.18 Мб

23 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    LM193DR (YOUTAI)