Вход / Регистрация

TP5532-VR

3PEAK
3PEAK TP5531 / TP5532 / TP5534 1.8V, 42μA, RRIO, Zero Drift Op-amps Description Features  LOW OFFSET VOLTAGE: 10 μV (Max)  ZERO DRIFT: 0.008 µV/°C  0.1Hz to 10Hz Noise: 1.1 µVPP  Low Supply Current: 42µA per Amplifier  Bandwidth: 350 kHz  Slew Rate: 0.16 V/μs  High Gain, 130 dB High CMRR and PSRR  Rail-to-rail Input and Output Swing  –40°C to 125°C Operation Range ...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус uSOP-8 MSOP8
Тип ОУ
Техническая особенность ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
3PEAK TP5531 / TP5532 / TP5534 1.8V, 42μA, RRIO, Zero Drift Op-amps Description Features  LOW OFFSET VOLTAGE: 10 μV (Max)  ZERO DRIFT: 0.008 µV/°C  0.1Hz to 10Hz Noise: 1.1 µVPP  Low Supply Current: 42µA per Amplifier  Bandwidth: 350 kHz  Slew Rate: 0.16 V/μs  High Gain, 130 dB High CMRR and PSRR  Rail-to-rail Input and Output Swing  –40°C to 125°C Operation Range  Small Packages: SC70 and SOT23 (TP5531) Applications The 3PEAK TP5531/2/4 low-power chopper stabilized operational amplifiers provide input offset voltage correction for very low offset and offset drift over time and temperature. The devices operate with a single supply voltage as low as 1.8V, while drawing 42μA per amplifier of quiescent current with a gain bandwidth product of 350kHz. They are unity gain stable, have no 1/f noise, have good Power Supply Rejection Ratio (PSRR) and Common Mode Rejection Ratio (CMRR), and feature railto-rail input and output swing. The devices were designed using an advanced CMOS process. The TP5531 (single version) is available in SC70-5, SOT23-5 and SO-8 packages. The TP5532 (dual version) is offered in MSOP-8 and SO-8 package. The TP5534 (quad version) is available in TSSOP-14 and SOIC-14 package. All versions are specified for operation from -40°C to 125°C. 3PEAK and the 3PEAK logo are registered trademarks of  Transducer Amplifier       Bidirectional Current Sense DC Offset Correction Temperature Measurement Remote Located Sensors Battery-Powered Instruments Electronic Weigh Scales 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. Related Zero-Drift Op-amps VOS (Max.) 10 μV 5 μV GBWP 350 kHz 3.5 MHz Supply Current 42 μA 500 μA eN at 1 kHz 55 nV/√Hz 15 nV/√Hz Single TP5531 TP5551 Dual TP5532 TP5552 Quad TP5534 TP5554 Pin Configuration (Top View) TP5531 SOT23-5/SC70-5 (-T and -C Suffixes) 0.1Hz to 10Hz NOISE 1 V- 2 +IN 3 5 V+ 4 -IN 500nV/div OUT TP5531U SOT23-5/SC70-5 (-T and -C Suffixes) +IN 1 V- 2 -IN 3 5 V+ 4 OUT 5s/div www.3peakic.com.cn REV B 1 PDF
Документация на семейство TP5531_TP5532_TP5534 

Дата модификации: 27.08.2019

Размер: 1.54 Мб

17 стр.

TP5531 / TP5532 / TP5534 1.8V, 34μA, RRIO, Zero Drift Op-amps Features  LOW OFFSET VOLTAGE: 10 μV (Max)  ZERO DRIFT: 0.008 µV/°C  0.1Hz to 10Hz Noise: 1.1 µVPP  Low Supply Current: 34µA per Amplifier  Bandwidth: 350 kHz  Slew Rate: 0.16 V/μs  High Gain, 130 dB High CMRR and PSRR  Rail-to-rail Input and Output Swing  –40°C to 125°C Operation Range  Small Packages: SC70 and SOT23 (TP5531) Applications  Transducer Amplifier       Bidirectional Current Sense DC Offset Correction Temperature Measurement Remote Located Sensors Battery-Powered Instruments Electronic Weigh Scales Description The 3PEAK TP5531/2/4 low-power chopper stabilized operational amplifiers provide input offset voltage correction for very low offset and offset drift over time and temperature. The devices operate with a single supply voltage as low as 1.8V, while drawing 34μA per amplifier of quiescent current with a gain bandwidth product of 350kHz. They are unity gain stable, have no 1/f noise, have good Power Supply Rejection Ratio (PSRR) and Common Mode Rejection Ratio (CMRR), and feature rail-to-rail input and output swing. The devices were designed using an advanced CMOS process. The TP5531 (single version) is available in SC70-5, SOT23-5 and SO-8 packages. The TP5532 (dual version) is offered in MSOP-8 and SO-8 package. The TP5534 (quad version) is available in TSSOP-14 and SOIC-14 package. All versions are specified for operation from -40°C to 125°C. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. Related Zero-Drift Op-amps VOS (Max.) 10 μV 5 μV 5 μV GBWP 350 kHz 1.5 MHz 3.5 MHz Supply Current 34 μA 220 μA 500 μA eN at 1 kHz 55 nV/√Hz 25 nV/√Hz 15 nV/√Hz Single TP5531 TP5541 TP5551 Dual TP5532 TP5542 TP5552 Quad TP5534 TP5544 TP5554 Pin Configuration (Top View) 500nV/div 0.1Hz to 10Hz NOISE 5s/div www.3peakic.com REV1.0 1 PDF
Документация на TP5531U-CR 

Microsoft Word - TP5531-5532-5534_REV1.0

Дата модификации: 22.04.2014

Размер: 652.2 Кб

16 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    JRC4558D (YOUTAI)