TP6002-TSR

3PEAK
TP6001/TP6002/TP6004 1 MHz, 80 μA, RRIO, Op Amps Features Description  Supply Voltage: 2.1 V to 6.0 V The TP600X series are CMOS single, dual, quad opamps with RRIO, low offset, low power and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth, 0.7 V/μs slew rate, and low distortion whil...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус TSSOP-8
Тип ОУ Маломощный операционный усилитель
Техническая особенность ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
TP6001/TP6002/TP6004 1 MHz, 80 μA, RRIO, Op Amps Features Description  Supply Voltage: 2.1 V to 6.0 V The TP600X series are CMOS single, dual, quad opamps with RRIO, low offset, low power and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth, 0.7 V/μs slew rate, and low distortion while drawing only 80 μA of quiescent current per amplifier. The common-mode input voltage range extends 100 mV beyond V− and V+, and the outputs swing rail-to-rail. The TP600X family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve the input/output range and performance.  Low Supply Current: 80 μA per channel  Rail to Rail Input and Output  Bandwidth: 1 MHz  Slew Rate: 0.7 V/μs  Excellent EMI Suppress Performance  Offset Voltage: ±3 mV Maximum  Offset Voltage Temperature Drift: 2 μV/°C  Low Noise: 27 nV/√Hz at 1 kHz  High Output Capability: 100 mA  −40°C to 125°C Operation Temperature Range Applications  Active Filters, ASIC Input or Output Amplifier  Sensor Interface  Smoke/Gas/Environment Sensors  Portable Instruments and Mobile Device The combination of features makes the TP600X an ideal choice for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in singlesupply systems. Typical Application Circuit www.3peakic.com.cn 1 / 19 Rev.A.0 PDF
Документация на семейство TP6001_TP6002_TP6004 

Дата модификации: 23.03.2022

Размер: 1.78 Мб

19 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS3121 (RUIMENG)