TPK1032AFL1-S6TR

3PEAK
TPK1032 Series 3-Channel Simple Power Sequencer Features Description ◼ Input Voltage Range: 2.5 V to 5.5V The TPK1032 series products are simple power sequencers, ◼ Power-Up and Power-Down Sequence Control which provide power-up and power-down sequence control of ◼ Single Enable Control Signal Input Channel multi-channel power supplies. Furthermore, the TPK1032 series ◼ Three Power...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип 3-Channel Simple Power Sequencer
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
TPK1032 Series 3-Channel Simple Power Sequencer Features Description ◼ Input Voltage Range: 2.5 V to 5.5V The TPK1032 series products are simple power sequencers, ◼ Power-Up and Power-Down Sequence Control which provide power-up and power-down sequence control of ◼ Single Enable Control Signal Input Channel multi-channel power supplies. Furthermore, the TPK1032 series ◼ Three Power Sequence Channels: support maximum three devices cascaded to control sequence ◆ Open-Drain Output of nine-channel power rails in one system. ◆ Selectable Timing Options The TPK1032 series products have three open-drain output ◆ Selectable Power-Down Sequence Options channels, and all the channels can be pulled up to any required ◼ Support Cascaded Device Output voltage level equal or lower than VCC. When the TPK1032 series ◼ Low Power Consumption are enabled with EN pin goes high, the three output channels ◼ Junction Temperature: –40°C to +125°C turn to high with the sequence of FLAG1-FLAG2-FLAG3 after ◼ Small SOT23-6 Package the selected delay period individually; When the TPK1032 series are disabled with EN pin goes low, the three output Applications channels turn low one by one with the selected sequence after ◼ Video Surveillance the selected delay period individually. ◼ Network Equipment and Servers The TPK1032 series products provide SOT23-6 package with ◼ Industrial Control guaranteed junction temperature range (TJ) from –40°C to ◼ FPGA/ASIC/CPLD Power Sequence Control +125°C. ◼ Power Supply Sequence Control Typical Application Schematic Power Sup ply VCC FLAG1 FLAG1 TPK10 32 Ena ble Sign al www.3peakic.com.cn EN FLAG2 FLAG2 GND FLAG3 FLAG3 1 / 13 Rev. A PDF
Документация на серию TPK1032 

TPK1032 3-Channel Simple Power Sequencer

Дата модификации: 30.09.2022

Размер: 544.4 Кб

13 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    SCM1101AMA (MORNSUN)